Isle of Wight · Fire damper testing
Fire damper inspection in Parkhurst
Our technicians work in Parkhurst on fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports as standard.
- Dampers overdue for their annual drop test
- Dampers that stick or won’t close fully
- Fire damper items raised by an assessor
Fire damper testing in Parkhurst, done properly
The idea behind drop testing is straightforward: we release the blade, watch it close fully, then reset it. We do this for buildings in Parkhurst and across the Isle of Wight, logging each one so the record builds year on year. Common call-outs are for rusted damper blades and springs and dampers that stick or won’t close fully, across fusible link fire dampers, motorised smoke dampers and hospitals and care homes.
Somewhere as small as Parkhurst, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.

- Where
- Parkhurst (PO30)
- Wider area
- Isle of Wight
- Reporting
- Written report with photos
- Quotes
- Fixed quote, usually within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
We also work for facilities teams across offices, schools and healthcare in Parkhurst and across the Isle of Wight. Work can be phased by floor, building or site to keep disruption down.
Why it’s worth doing now in Parkhurst
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. A fault that closes a site in a village like Parkhurst affects everyone who depends on it.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. You will have a fixed price before any work starts.
Why us?
- One number for every site across the South East and London
- We’re fully insured
- Ventilation hygiene specialists since 2009
- We diagnose before we treat
Fire damper testing around Parkhurst
Going by the FSA’s register, there are about 17 schools, colleges and universities, about 11 care, childcare and hospital premises and about 6 hotels and B&Bs serving food within roughly a mile and a half of the centre of Parkhurst. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. About less than half a mile south of Parkhurst is St Mary's Hospital, the nearest hospital. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Parkhurst is covered by Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Historic houses near Parkhurst, with Carisbrooke Castle about 2.1 miles south, are a reminder that older buildings can hold dampers in unexpected places. The nearest hospital, St Mary's Hospital, is about less than half a mile south; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly. For schools like Hunnyhill Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Parkhurst is about 1 mile north of Newport, in the Isle of Wight. We provide fire damper testing for businesses, landlords and public buildings in Parkhurst and the rest of the Isle of Wight. Across the Isle of Wight, we cover 125 places, Parkhurst among them. Our Portsmouth page covers sites nearby (12 miles or so).
We cover every part of the PO30 postcode area for fire damper testing and the roads nearby. Fire damper testing is available to premises on Dodnor Lane, Argyle Road and Sherwood Road and nearby roads. Neighbouring places we cover for fire damper testing include Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). Larger places within reach include Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). Remote and island sites need a little more planning, so please mention your location when you phone us on 0345 646 2711 or drop us a line.
Near you in Parkhurst
Locally, jobs take us to businesses close to Medina College, Island Innovation VI Form Campus and The Stag pub and the streets around them. Nearby you’ll also find Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Not far away are Mill Hill and Briddlesford Nature Reserve.
Keeping the system healthy
No system stays clean for ever, but care slows the build-up. Our tips:
- Do not let hatches get painted shut or boarded over
- Act on failed dampers rather than leaving them on file
- Keep damper test reports with the fire safety log
- Don’t let anything obstruct a damper’s blade
Pass the report to whoever keeps your fire risk assessment up to date so their assessment matches what was found. Outstanding faults should be dealt with, not left on file.
Deal with leaks and condensation near dampers quickly. Rusted parts are one of the main reasons dampers fail to close.
Staff cleaning versus specialist work
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you can’t see still need a specialist at the right interval.
Towns and villages near Parkhurst
Other services in Parkhurst
Questions from Parkhurst
Can you come to Parkhurst after we close?
Yes, nights and weekends are routine for us. That way a site in Parkhurst does not have to lose a day’s trading. When you call us on 0345 646 2711 or use the quote form, mention when the site is quiet.
Can fire dampers in schools around Parkhurst be tested in the holidays?
Yes, and it’s the easiest time to do it. The FSA’s register shows about 17 schools and colleges with food registrations within roughly a mile and a half of Parkhurst. Booking early in the term gives the best choice of holiday dates.
Will we get a certificate for the dampers?
Our paperwork is a test report, not a certificate of compliance. For each damper it shows the result and anything that needs putting right.
Do you cover Parkhurst?
Yes. Parkhurst is part of the area we cover, within the South East and London area we cover.
Can you price the work without visiting?
Normally, yes. Send a few wide photos plus close-ups of panels, filters or grilles, and a fixed quote normally follows within one working day. Some sites still need a visit, and we’ll say so.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We have been trading since 2009 and we are fully insured.
Which sectors do you work in?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What’s TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t law, but it’s the benchmark.
What affects the quote in Parkhurst
Sites vary more than people expect. The main factors:
- A single visit or a regular plan
- The condition we find in the survey
- Site rules, permits and inductions
- The size of the system
We don’t list prices on the website, because the cost depends on the site in front of us. Call for a fixed quote, and we will talk you through it.
Helping us quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Any symptoms, from odd noises to smells or leaks
- The paperwork from the last visit, if you have it
For a fixed quote, call 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. You will usually have a quote within one working day.
What we do, step by step
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before we start, and floors and nearby surfaces are sheeted. On site, it takes a couple of hours for a few dampers, and a day or more across a big site. If you can send photos, we can arrive in Parkhurst knowing what to expect.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
How to prepare
- Make sure someone can let us in and lock up afterwards
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Dig out any earlier paperwork for the system
Getting a quote
For fire damper testing in Parkhurst, call 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, and send pictures or your last report if you can. A fixed quote usually follows within one working day.
Read more
What a clean won’t put right
Not every problem is solved by fire damper testing, and we’d rather say so up front. It does not solve:
- Designing the building’s fire compartments
- Control wiring problems outside the damper itself
- Gaps in the wall or floor around the damper
Not sure which it is? You can call 0345 646 2711 or use the quote form and we will tell you honestly.
What we work on in Parkhurst
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Offices and schools