Isle of Wight · Ductwork cleaning
Duct cleaning in Parkhurst
Our technicians work in Parkhurst on cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- A duct nobody has opened in years
- Readings above 200 microns from a grease thickness test
- A rancid smell from the extract duct
Ductwork cleaning around Parkhurst
Food Standards Agency records list about 53 cafés, restaurants and staff canteens and about 18 sandwich bars and takeaways in Parkhurst and the streets around it, up to about 1.5 miles out. Where they cook under a canopy, grease does not stop at the filters: it settles along the duct and up the riser. The fire and rescue service for Parkhurst is Hampshire and Isle of Wight Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Kitchens in Parkhurst get their food hygiene inspections from Isle of Wight council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Our report lists what was cleaned and when, which is useful to have ready.
Term dates shape school work: for a school like Hunnyhill Primary School, an extract clean fits neatly into a half-term or summer break. Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Carisbrooke Castle is about 2.1 miles south), access may need planning. If you run catering at a healthcare site, such as a hospital like St Mary's Hospital about less than half a mile south, the extract may need cleaning more often than a part-time kitchen.
Parkhurst is about 1 mile north of Newport, in the Isle of Wight. Every kind of commercial site in Parkhurst, we can take on ductwork cleaning. We can work out of hours so trading isn’t interrupted. Parkhurst is one of 125 places in the Isle of Wight where we work for commercial clients. For sites nearby, see our Portsmouth page (12 miles or so).
All of PO30 is covered for ductwork cleaning, from busy streets to back roads. Whether your site is on Dodnor Lane, Argyle Road and Sherwood Road or anywhere close by, our technicians can take on the work. We also cover Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). Larger places within reach include Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). For island and remote sites, a little more planning is needed, so mention it when you ask for a quote.
Landmarks near Parkhurst
Around Parkhurst, our work takes us to kitchens and buildings near Medina College, Island Innovation VI Form Campus and The Stag pub. Nearby you’ll also find Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
Ductwork cleaning in Parkhurst
Not sure when the ductwork was last cleaned? Tell us about the system when you call us on 0345 646 2711 or drop us a line, and a fixed price will follow, normally within one working day. The work covers multi-storey ducts, horizontal duct runs and access panels, and common reasons people get in touch are readings above 200 microns from a grease thickness test and fat dripping from the ductwork.
For a kitchen in or near Parkhurst, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The report is your system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Place
- Parkhurst (PO30)
- Wider area
- Isle of Wight
- Records
- Certificate plus before-and-after pictures
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
What affects the cost of ductwork cleaning
Before we fix a price, we need to know a few things. We look at:
- One-off work versus a regular cycle
- How easy every part is to reach
- The condition we find in the survey
- Site requirements such as sign-in and permits
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we’ll go through it with you.
Helping us quote
Photos and a few facts are often enough to price the work. Send what you can of the following:
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- The paperwork from the last visit, if you have it
- Any symptoms, from odd noises to smells or leaks
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before any work starts.
How the visit works
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes anything from a few hours to several visits, depending on the length of duct. A few photos of the system help us make the most of a visit to a place like Parkhurst.
- We start by working out how the duct runs and where it can be opened.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Getting ready for the visit
- Allow time for equipment near the work to be turned off and cool down
- Clear loose items from the work area
- Make sure someone can let us in and lock up afterwards
How to get a quote
If you need ductwork cleaning in Parkhurst, ring 0345 646 2711 or use the quote form. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. We usually send a fixed quote within one working day.
Advice
Nearby places to Parkhurst
More services for Parkhurst
Your questions about ductwork cleaning in Parkhurst
Who carries out food hygiene inspections in Parkhurst?
Kitchens in Parkhurst are inspected by Isle of Wight council’s environmental health officers. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Which fire and rescue service is responsible for Parkhurst?
Parkhurst is in the area of Hampshire and Isle of Wight Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
How do you know if the ductwork needs cleaning?
The date on the last certificate is the first thing to check. No record, or a passed date, means it’s due, and grease readings will confirm how urgent it is.
How do you protect the area?
With sheeting and covers, before anything else happens. The work is kept contained and leave the area clean.
Can you set up regular visits?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. The report from each visit recommends the next date.
Can you clean ductwork with no access panels?
Sections out of reach are written down on the report, as TR19 expects. New panels can be fitted to reach them in future.
How often should kitchen ducts be cleaned?
It depends mostly on daily cooking hours. Heavy use of 12 to 16 hours a day means at least every 3 months, while lighter use can go longer.
How is kitchen extract ductwork cleaned?
We survey the route, test the grease, then open the access panels. We clean the runs and risers section by section, then the readings are repeated.
When something else is needed
We will always give you a straight diagnosis, so here’s what ductwork cleaning will not do:
- Faulty fire dampers
- Leaking duct joints that need repair
- A worn-out fan that needs replacing
If in doubt, give us a ring on 0345 646 2711, or email photos and we’ll say what we think before you book.
Where we work
- Bends and junctions
- Vertical risers
- Access panels
- Multi-storey ducts
- Horizontal duct runs
- Attenuators
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We’ll take a look and give you a fixed quote.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
Leave it or put it right?
Booking the duct clean in Parkhurst now keeps it a planned job. The work takes a few hours for a short run, longer for long runs and tall risers, and we work evenings, overnight and weekends. Our emergency line runs 24/7, but a planned visit to Parkhurst is calmer for everyone.
The price reflects the work, not guesswork. That’s why we survey first, from pictures or on site, and why the quote is fixed before work begins.
Why Parkhurst businesses choose us
- Photo reports with every job
- Survey first, then a fixed quote
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- One number for every site across the South East and London
See how cleaning jobs are priced or our accreditations and certificates.
Different parts, different methods
Multi-storey and shared buildings
Ducts in taller or shared buildings often run past other occupiers. We plan access with you and the building manager, so the clean is done safely and quietly.
Access panels
Panels have to seal properly once they’re closed, so grease and air stay inside the duct. We will tell you if any panel needs replacing.
Aftercare tips
No system stays clean for ever, but care slows the build-up. A few tips:
- Report any grease dripping from duct joints
- Diarise the next duct clean
- Run the extract fan throughout service
- Make sure filters are seated properly
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Run the extract the whole time the kitchen is cooking. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.