Hampshire · Ductwork cleaning
Ductwork Cleaning in Arford
For ductwork cleaning in Arford, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- High readings at a recent grease test
- Grease pooling at the foot of the riser
- Grease seeping out of the duct seams
Ductwork cleaning in Arford, done properly
In doctor’s terms, the ductwork is the system’s arteries: diagnose where grease has built up, clear it and confirm the result. Grease readings before and after give you the evidence, alongside before and after photos. Common call-outs are for thick crusts of old grease along the duct and heavy grease at the base of a riser, across multi-storey ducts, attenuators and vertical risers.
Somewhere as small as Arford, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Every one of them still needs its extract kept clear of grease, whatever the size of the place.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Where
- Arford (GU35)
- Region
- Hampshire
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed quote up front
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Why it’s worth doing now in Arford
Old grease in a duct for a kitchen in Arford does not stay soft. It bakes into a hard layer that takes far longer to remove, so the later the clean, the bigger the job. Our emergency line runs 24/7, but a planned visit to Arford is calmer for everyone.
The cost depends on how big the system is, what state it’s in and how easy it is to reach. We give you a fixed price before work begins, so you know where you stand.
Why Arford businesses choose us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Full insurance on every job
- In business since 2009
- Survey first, then a fixed quote
Read our cost guide or how to check a contractor.
Common questions in Arford
Will you come out to Arford?
Yes, we work in villages as well as towns, and Arford is covered. Just mention lanes, gates or anything else about the site when you book.
Which environmental health team covers Arford?
Kitchens in Arford are inspected by East Hampshire council’s environmental health officers. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
Can you fit access panels in our ductwork?
Yes, as part of our fits and repairs work. We place them where they help most, and we will recommend where.
What if parts of the system cannot be reached?
We record them on the report, with a note of where it is, and we explain what access is needed, such as extra access panels in ductwork.
What happens to the waste?
We take it away when we go. While we work, it’s kept contained so the area stays clean.
What if part of the duct cannot be reached?
We clean everything we can reach and record what we can’t. Fitting extra access panels is the usual answer, and we can do that for you.
How much notice do you need?
The more notice, the better, especially for out-of-hours work. Quotes normally come back within one working day, and there’s a 24/7 line for emergencies.
Part by part
Horizontal duct runs
Horizontal runs carry the extract along ceilings and through voids. They collect grease as the air cools and slows, and we clean them section by section through access panels.
Multi-storey and shared buildings
A fire in a duct in a shared building can affect far more than one kitchen, so the responsible person has more reason to keep it clean. Your certificate and report give building managers the record they need.
What affects the cost of ductwork cleaning
The diagnosis comes before the price. We look at:
- The condition of the system
- Site rules, permits and inductions
- Whether we need access equipment or extra panels
- Travel, parking and unloading
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you will get one fixed quote.
What to send for a quote
There’s no need for technical detail. Just send:
- Where the site is and what kind of site it is
- Any previous report or certificate
- A few general shots of the system
- The roof, plant room or outside wall the system runs to
To get a fixed quote, call 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. We usually come back within one working day.
Towns and villages near Arford
Other services in Arford
Kitchen extracts in Arford
Food Standards Agency records list about 3 cafés, restaurants and staff canteens in Arford and the streets around it, up to about 1.5 miles out. The duct above a busy canopy coats itself in grease long before anyone sees it. It’s East Hampshire council that sends environmental health officers to food businesses in Arford. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Before-and-after photos from each clean are a simple way to show the extract is in hand. Arford sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Term dates shape school work: for a school like The Holme Church of England Primary School, an extract clean fits neatly into a half-term or summer break. Where a hall near Church of All Saints, or anywhere in Arford, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Arford is about 6 miles south of Farnham, in Hampshire. Whether your site is in the middle of Arford or further out, we cover ductwork cleaning for every kind of premises, from small sites to large estates. Our Hampshire coverage runs to 683 places, and Arford is one of them. Our Guildford page covers sites nearby (14 miles or so).
We cover every part of GU35 for ductwork cleaning and the roads nearby. Streets in the area include Beech Hill Road, Arford Common and Headley Hill Road, all of which we cover for ductwork cleaning. We also cover the places around Arford: Headley (1 mile south-west), Headley Down (1 mile east), Lindford (1 mile west), Standford (1 mile south-west) and Wishanger Common (2 miles north). We also work in nearby towns such as Farnborough (12 miles north), Fleet (11 miles north), Aldershot (9 miles north), Alton (7 miles west), Petersfield (10 miles south-west) and Yateley (15 miles north).
Around Arford
Locally, jobs take us to businesses close to The Holly Bush Inn and Mill Chase Academy and the streets around them. For rail, the closest station is Liphook station, roughly 3.6 miles south of the centre. Well-known places in the area include Chase Community Hospital (2.3 miles south-west). For a walk, there’s Deadwater Valley and Gibbet Hill.
When to call us in Arford
Grease settles fastest where the air slows down. Long horizontal runs, bends, changes in size and the foot of a riser all collect more, and those are the points we pay most attention to.
Common reasons sites call us are:
- Grease leaking from duct joints
- Proof of duct cleaning for the insurer
- Stale grease odours from the duct
- Duct runs with no cleaning record
Healthcare kitchens, like those at hospitals such as Chase Community Hospital (about 2.3 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
What your quote should include
- Whether the figure could change on the day
- Whether the quote is based on a survey or photos
- What records you will receive afterwards
- Whether the work can be done while the site is closed
How it works
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. A quick note on how to find the site and where to park makes a visit to Arford run smoothly.
- First the duct route is traced and every access point noted.
- We measure grease thickness at set points before cleaning.
- We open the panels and scrape out the heaviest grease.
- Horizontal runs and risers are then degreased by the method that suits the deposit.
- Post-clean readings and photos go into the report, with any unreachable section listed.
Getting ready for the visit
- Find the previous report, if there is one
- Name a contact who can let us in at the agreed time
- Allow time for equipment near the work to be turned off and cool down
How to get a quote
We do not publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then send you a fixed quote. To get going, give us a ring on 0345 646 2711 or email us.
Read more
Landlords, agents and facilities managers
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
If you look after several sites, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so each one has its own record.
Staff cleaning versus specialist work
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We will take a look and give you a fixed quote.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.