Hampshire · GU35
Kitchen extract cleaning in GU35
Our technicians cover all of the GU35 postcode district, including Bordon, Pinewood Village and Whitehill. Every TR19® clean ends with a certificate and photo report.
Areas within GU35
- Bordon
- Pinewood Village
- Whitehill
- Headley Down
- Deadwater
- Lindford
- Headley
- Arford
- Kingsley
- Standford
- Frithend
- Hollywater
- Oakhanger
- Sleaford
Services in GU35
- Grease filter exchange
- Ductwork cleaning
- Commercial kitchen deep cleaning
- TR19 inspections and grease testing
- Extract fan cleaning
- Canopy and hood cleaning
- Kitchen extract cleaning
- Extract fan repair and replacement
- Ventilation duct cleaning
- Grease trap cleaning
- Fire damper testing
- Air handling unit cleaning
- Every service
Tell us what needs doing and your postcode for a quick quote: ring 0345 646 2711 or use the quote form.
Postcodes nearby
More in Hampshire
Towns and villages in Hampshire
Every area we cover
About kitchen extract cleaning in GU35
Not sure when the extract was last cleaned, or by whom? Send a few photos of the canopy and filters when you call 0345 646 2711 or drop us a line, and you will have a fixed quote for kitchen extract cleaning in GU35, normally within one working day. The work covers discharge points, extract fans and vertical risers, and people most often call us about a TR19 certificate needed for the insurer and grease smells coming from the extract.
At the end of the visit, someone from your team can look over the work with us. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. All told, the work takes a single shift for most kitchens, with long duct runs and tall risers needing more time.
- Diagnosis comes first, with a survey of the system and how it’s reached.
- We record grease levels at set points, then fix the price.
- After the kitchen closes, we sheet the area and set up to contain grease and water.
- Heavy deposits are scraped by hand and the system degreased to TR19® Grease.
- Then the clean bill of health: readings, a TR19 certificate and a photo report with the next date.
How we quote
We do not list prices on the website, because each job is priced on what it involves. For a fixed quote, phone us on 0345 646 2711, or email photos, and we’ll talk you through it.
What you get with us
- In business since 2009
- Full insurance on every job
- We diagnose before we treat
- Photo reports with every job
Getting a quote
Here’s what helps us quote: the address, the type of site and when it’s open, pictures of the system and the last certificate or report, if there is one. Once you have those, phone us on 0345 646 2711 or email us.
Landmarks near Bordon
Around Bordon, our work takes us to kitchens and buildings near Bordon Infant School, St Mark's Sacred Church and Mill Chase Academy and the streets around them. Bordon’s nearest station is Liphook station, about 4.1 miles south-east of the centre. Nearby you’ll also find The Romany Museum (3.6 miles west) and Chase Community Hospital (0.6 miles south). The countryside around Bordon includes Selborne Hill and Deadwater Valley.
Where we work in GU35
From Bordon, Pinewood Village and Whitehill to its smaller places, GU35 has kitchens of every size. Each extract is cleaned to the same TR19® standard, canopy to discharge.
In England, the Fire Safety Order puts the duty on the responsible person to assess and reduce fire risk, and each certificate and photo report is a record you can keep in your log book.
Bordon: Healthcare kitchens, like those at hospitals such as Chase Community Hospital (about 0.6 miles south), often cook for long hours, which puts them in BESA’s heavier-use bands. If you look after a school kitchen, at a school such as Bordon Infant School or anywhere near Bordon, the holidays are the usual time for a TR19® clean.
For landlords and multi-site operators
From a single site to a large estate, you get the same standard: a survey first, a fixed quote, the work timed around the site and a report with photos.
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
Why act early?
Every week without a clean adds another layer. BESA guidance says the mean should not go above 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. The longer it’s left, the bigger the job becomes.
Questions to ask before you book
- Exactly which parts of the system are covered
- Whether VAT is included
- If they look at the system before pricing
- Proof of accreditation you can verify
What the work involves, part by part
Canopy and plenum
The canopy catches the vapour, and the plenum behind the filters is where it first condenses. We clean both inside and out, including the filter housing.
Extract fan and discharge
At the end of the system is the discharge, and grease can collect there too. It’s cleaned as far as safe access allows, and any limits are recorded.
Keeping the system healthy
Good habits slow the build-up between visits. A few tips:
- Keep the baffle filters clean
- File each certificate with the fire risk assessment
- Refit filters properly after cleaning
- Diarise the next clean as soon as you get the certificate
A TR19 certificate notes the date, the location and the technician. Keep it in the maintenance log with your fire risk assessment so it’s ready when anyone asks to see it.
Keep the fan on throughout service. Switching it off early leaves vapour to settle on the canopy and plenum, and the next clean has more to do.
What affects the quote in GU35
The price is fixed before any work begins. It’s based on:
- The condition we find in the survey
- The scale of the work
- How many systems or sites are involved
- Any permits to work or inductions
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before we start.
What to send for a quote
Many jobs can be priced from photos and some basics. Useful things to send:
- Wide pictures of the system and the area around it
- Any symptoms, from odd noises to smells or leaks
- Your last certificate, test record or report
- Your opening hours and when the area is out of use
Want a quote for kitchen extract cleaning? Please give us a ring on 0345 646 2711, or email photos with a few details about the site. We’ll talk you through the work and give you a fixed quote before anything is booked.
GU35 questions
Can you quote from photos?
In many cases, yes. With good photos, the site type and your last report, we can price many jobs. Where we cannot see enough, we arrange a survey.
Do you work with multi-site operators?
Yes. You deal with one contact for every site across London and the South East, with visits on a regular schedule.
How much does kitchen extract cleaning cost?
We do not publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before any work starts.
What’s the right cleaning interval for a kitchen extract?
It depends on how many hours a day the kitchen cooks. BESA’s minimums run from every 3 months for heavy use to every 12 months for light use. We will recommend a date after measuring the grease.
Do I have to clean my extract to TR19 by law?
Strictly, the legal duty comes from the Regulatory Reform (Fire Safety) Order 2005, not from TR19. TR19 is the industry benchmark for meeting that duty in a kitchen extract, and an insurer may refuse or reduce a claim without it.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
Is GU35 in your area?
Yes. GU35 is part of the area we cover, within the South East and London area we cover.