Hampshire · Ductwork cleaning
Standford ductwork cleaning
Ductwork cleaning for businesses, landlords and public buildings in Standford. CHAS, SafeContractor and ISO 9001, and fully insured.
- Hardened, baked-on grease in long horizontal runs
- High readings at a recent grease test
- Smells of old cooking grease from the ductwork
When it’s something else
Before you book, it helps to know what’s not included:
- A failed fan motor at the end of the duct (a fan repair job)
- Duct sealed behind fixed ceilings or walls
- Leaking duct joints that need repair
If in doubt, call us on 0345 646 2711 or send us an email and we will say what we think.
Where we work
- Horizontal duct runs
- Bends and junctions
- Vertical risers
- Attenuators
- Access panels
- Multi-storey ducts
Ductwork cleaning for kitchens and businesses in Standford
Duct Doctor has cleaned kitchen extract ductwork since 2009, working across London and the South East. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, with each certificate issued through the BESCA portal. The work covers access panels, multi-storey ducts and bends and junctions, and people most often call us about gaps where access panels were never fitted and fat dripping from the ductwork.
Work in a small place like Standford starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Where
- Standford (GU35)
- Wider area
- Hampshire
- Reporting
- TR19® certificate and photo report
- Quote
- Fixed quote, usually within a working day
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Multi-site and managed buildings
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
Between visits
No system stays clean for ever, but care slows the build-up. Our tips:
- Leave a way through to the access panels
- Keep grease filters clean and fitted whenever you cook
- Keep to the interval on the report
- Flag drips from the duct right away
Grease readings are taken again at the same set points, giving you before and after readings. Photos of each section go alongside them.
The less grease gets past the canopy, the cleaner the duct stays. Keep the filters clean, well fitted and in place whenever you cook.
Different parts, different methods
Attenuators and discharge
At the end of the duct is the discharge. Grease can collect there and stain the area around it, so it’s cleaned as far as safe access allows.
Bends and transitions
A bend can hold far more grease than a straight run of the same length. It’s scraped out and degreased, and test it before and after.
Standford: your questions answered
Which council inspects kitchens in Standford?
Kitchens in Standford are inspected by East Hampshire council’s environmental health officers. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Which fire authority looks after Standford?
Fire safety enforcement in Standford is handled by Hampshire and Isle of Wight Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
How is kitchen extract ductwork cleaned?
We get into the duct through its access panels. Heavy grease is scraped out by hand, then the surfaces are degreased with a method that suits the deposit, such as degreasers, hot water or steam.
Is a quote from photos possible?
Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
What do you need from me for a quote?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and the last report help too. After that, simply call us on 0345 646 2711 or drop us a line.
Do you look at the system first?
Yes, always. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it and the fixed quote is built on it.
How long will the duct clean take?
Allow a shift or more, depending on the length of the runs and the number of access points. We will confirm the time when we quote.
Will the duct clean disrupt the kitchen?
Out of hours, at a time that suits the kitchen. Long ducts can be split across visits, with the kitchen ready to cook each morning.
Ductwork cleaning around Standford
Food Standards Agency records list about 13 cafés, restaurants and staff canteens and about 11 sandwich bars and takeaways in and around Standford, up to about a mile and a half out. Where they cook under a canopy, grease does not stop at the filters: it settles along the duct and up the riser. Food hygiene inspections in Standford are the job of East Hampshire council’s environmental health team. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Keeping each certificate and photo report on file helps show the extract is looked after. Standford is covered by Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
A hall kitchen that only cooks for events, whether near St Mark's Sacred Church or elsewhere in Standford, still needs its extract cleaned, just less often. For schools such as Weyford Nursery and Primary School, kitchen extract cleaning is usually booked for the holidays, when the canteen is closed. Healthcare kitchens, like those at hospitals such as Chase Community Hospital (about 1.1 miles west), often cook for long hours, which puts them in BESA’s heavier-use bands.
Standford is about 7 miles south-east of Alton, in Hampshire. Whatever kind of site you run in Standford, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Across Hampshire, we cover 683 places, Standford among them. We also work in Guildford, around 15 miles away.
Work in GU35 is surveyed, quoted and booked the same way as anywhere else. We cover sites on Robin Hood Gardens, Standford Lane and Tulls Lane and the roads around them. Neighbouring places we cover for ductwork cleaning include Hollywater (1 mile south-west), Deadwater (1 mile north-west), Lindford (1 mile north-west), Headley (1 mile north-east) and Bordon (1 mile north-west). We also work in nearby towns such as Farnborough (13 miles north), Fleet (12 miles north), Aldershot (10 miles north), Alton (7 miles north-west), Petersfield (8 miles south-west) and Hook (13 miles north-west).
Near you in Standford
Typical jobs here are in premises near Mill Chase Academy. Standford’s nearest station is Liphook station, about 2.9 miles south-east. Well-known places in the area include Chase Community Hospital (1.1 miles west). For a walk, there’s Wheeler's Down and Deadwater Valley.
What we do, step by step
Each visit runs to the same pattern: sheeting and protection first, make the system safe, do the work, tidy up and leave you the report. On site, the work takes a few hours for a short run, longer for long runs and tall risers. In a small place like Standford, the journey is planned ahead and the visit arranged around the site’s hours.
- We start by working out how the duct runs and where it can be opened.
- Set points along the runs are tested for grease.
- We open the panels and scrape out the heaviest grease.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Post-clean readings and pictures go into the report, with any unreachable section listed.
Preparing for the visit
- Clear loose items from the work area
- Agree a time when the area can be out of use
- Dig out any earlier paperwork for the system
How to get a quote
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Related advice
Other services in Standford
What affects the quote in Standford
The diagnosis comes before the price. The main factors are:
- When the work can happen, such as evenings, overnight or weekends
- One-off work versus a regular cycle
- Any permits to work or inductions
- Parking and loading at the site
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Asking for a quote
To speed up the quote, please include:
- The postcode and the type of business
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Getting a quote doesn’t take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Why act early in Standford
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. Rural sites can’t always move to another kitchen or room when something fails.
We don’t list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll explain what it covers.
Why choose Duct Doctor in Standford
- Accredited under CHAS and SafeContractor, with ISO 9001
- Fully insured
- Survey first, then a fixed quote
- One number for every site across the South East and London
See our cost guide and our accreditations.