Hampshire · Extract fan cleaning
Extract fan cleaning in Arford, Hampshire
Extract fan cleaning across Arford and nearby, timed so the site keeps working and finished with a written report and pictures.
- Grease escaping from the fan outlet
- A fan that has never been cleaned
- Vibration from an unbalanced impeller
When something else is needed
Before booking, it helps to know what’s not included:
- A fan that was never right for the kitchen
- A fan that won’t start
- A dirty duct upstream of the fan
If you are not sure, just call 0345 646 2711 or send us an email and we’ll give you a straight answer.
What the work covers
- Axial fans
- In-line fans
- Centrifugal fans
- Discharge points
- Fan housings
- Roof-mounted fans
Extract fan cleaning for kitchens and businesses in Arford
In Arford, as everywhere we work, the fan follows a set routine: isolated first, then opened, scraped and degreased. The result is photographed for your records. Typical jobs include vibration from an unbalanced impeller and grease escaping from the fan outlet, across fan housings, axial fans and roof-mounted fans.
For a kitchen in or near Arford, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Think of the report as the system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Where
- Arford (GU35)
- Region
- Hampshire
- Records
- Certificate plus before-and-after pictures
- Price
- Fixed quote, typically within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Arford kitchens: local notes
Food Standards Agency data counts about 3 restaurants, cafés and works canteens within about 1.5 miles of central Arford. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Arford sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Environmental health officers from East Hampshire council inspect food businesses in Arford. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A dated certificate in the maintenance file answers the question before it’s asked.
School kitchens, at schools like The Holme Church of England Primary School for example, are normally cleaned in the holidays so no lunches are lost. If you run a church or community hall kitchen, near Church of All Saints or elsewhere in Arford, its extract still collects grease from every lunch and event.
Arford is about 6 miles south of Farnham, in Hampshire. Anywhere in GU35, we can carry out extract fan cleaning at your premises. Across Hampshire, we cover 683 places, Arford among them. There’s also a page for Guildford, roughly 14 miles from Arford.
Extract fan cleaning in GU35 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Beech Hill Road, Arford Common and Headley Hill Road, all of which we cover for extract fan cleaning. Other places close to Arford include Headley (1 mile south-west), Headley Down (1 mile east), Lindford (1 mile west), Standford (1 mile south-west) and Wishanger Common (2 miles north). We also work in nearby towns such as Farnborough (12 miles north), Fleet (11 miles north), Aldershot (9 miles north), Alton (7 miles west), Petersfield (10 miles south-west) and Yateley (15 miles north).
Around Arford
We work in commercial kitchens and buildings around The Holly Bush Inn and Mill Chase Academy. For rail, the closest station is Liphook station, roughly 3.6 miles south of the centre. Other landmarks nearby include Chase Community Hospital (2.3 miles south-west). For a walk, there’s Deadwater Valley and Gibbet Hill.
When to call us in Arford
Poor filters mean a greasier fan. When filters don’t seal, grease goes straight through to the fan, so the fan takes far more than it should.
Most sites get in touch when they notice something like this:
- Grease escaping from the fan outlet
- Hot, greasy smells near the fan
- A fan shaking on its mounts
- Weak extraction at the canopy
Healthcare kitchens, like those at hospitals such as Chase Community Hospital (about 2.3 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
Comparing quotes
- Exactly which parts of the system are covered
- If they look at the system before pricing
- Which accreditations they hold, and whether you can check them
- When they can work, and whether that’s outside your opening hours
Why deal with it now?
For a kitchen in Arford, a noisy, greasy fan is often the first sign the whole system is overdue. If the fan is coated, the duct before it usually is too, so it’s worth checking the whole system. Systems in rural buildings are often out of sight and out of mind.
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered and we will price it together.
What you get with us
- One contact for all your sites in London and the South East
- Photo reports with every job
- In business since 2009
- We’re fully insured
Take a look at what affects the cost and our accreditations and certificates.
Places near Arford
What else we do in Arford
Arford questions
Which fire authority looks after Arford?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Arford. TR19® is not law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Who carries out food hygiene inspections in Arford?
In Arford, it’s East Hampshire council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
How far ahead should we book?
For planned work, earlier is better, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
Why has my extract fan got louder?
Uneven grease on the impeller often causes it. We clean the fan and tell you if anything else, like worn bearings, is to blame.
How much does extract fan cleaning cost?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before we start.
What do you do with what you remove?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
Do you offer maintenance contracts?
Yes. Plans on a 3, 6 or 12-monthly cycle are available, to suit the system and how it’s used.
Are you fully insured?
Yes. Duct Doctor is fully insured, and the details are available on request.
What the work involves, part by part
Inline duct fans
Some fans are built into the duct itself. We get to them through the duct or casing after isolating them.
Impellers and blades
A clean impeller shows any damage: cracks, bent blades or wear. Anything we see goes on the report.
How it works
The first job on site is protection: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes an hour or two for most single fans, and the area is cleaned down before we leave. In a small place like Arford, the journey is planned ahead and the visit arranged around the site’s hours.
- First we check the fan’s condition and how it sounds.
- Once isolated, we open the fan up.
- Each blade is cleaned so the impeller runs evenly.
- We clean the casing, the outlet and around the motor.
- The fan goes back into service with a report on its condition.
Preparing for the visit
- Agree a time when the area can be out of use
- Tell us about site rules, permits or sign-in
- Move anything stored near the system
Getting a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price, before we start.
Advice
What affects the quote in Arford
The diagnosis comes before the price. The main factors are:
- Whether we need access equipment or extra panels
- Where the site is and how we reach it
- Site requirements such as sign-in and permits
- The number of sites or systems
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you’re unsure, ring 0345 646 2711, or email photos and we’ll give you an honest view and a fixed quote.
Helping us quote
Many jobs can be priced from photos and some basics. Send what you can of the following:
- Wide photos of the system and the area around it
- How we’d reach plant on a roof or in a plant room
- Detail shots of panels, filters and grilles
- Problems your staff have spotted
Getting a quote does not take long. Call or email with a few details and you will usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Between visits
Think of this as the after-treatment advice, in brief:
- Keep the grease filters clean and in place
- Report rattles or humming early
- Tell us if the extract feels weaker
- Keep access to the fan clear
A full system clean includes a TR19 certificate from the BESCA Vent Hygiene Elite portal. If only the fan is cleaned, the photo report says so.
The fan stays cleaner when less grease gets past the canopy. Clean, well-seated filters are the fan’s first protection, and replace any that are damaged.