Greater London · TR19 inspections and grease testing
TR19 inspections and grease testing in Stanmore, Greater London
Our technicians work in Stanmore on TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification. Fixed quotes, work around your opening hours and photo reports on every job.
- Kitchens taken over with no cleaning records
- Cleaning intervals that may not suit the kitchen
- Surveys needed before quoting a full clean
TR19 inspection in Stanmore
Taking on a kitchen in Stanmore with no cleaning records? Start with an inspection. You get readings, photos and a clear view of what’s needed, so the next step is based on facts. The work covers post-clean checks, wet film thickness tests and access surveys, and people most often call us about parts of the system left out of past cleans and cleaning intervals that may not suit the kitchen.
Across London, many commercial kitchens are squeezed into basements and narrow back-of-house spaces, with extract ducts that can climb several floors to discharge at roof level. In Stanmore, as elsewhere in the capital, a long duct run means more access points to open and more grease to remove.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Where
- Stanmore (HA7, HA8, HA3)
- Wider area
- Greater London
- Records
- TR19® certificate and photo report
- Quotes
- A fixed price before any work starts
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Updated
- 30 October 2026
What affects the quote in Stanmore
The price is fixed before any work begins. It takes into account:
- Working hours and out-of-hours timing
- Site requirements such as sign-in and permits
- Whether several sites go on one quote
- Parking and loading at the site
Every site is different, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Helping us quote
A few details help us quote accurately. With your enquiry, please include:
- Photos showing the whole system and its surroundings
- When the site is open and when it’s quiet
- Close-ups of filters, grilles, hatches or access panels
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Want a quote for TR19 inspection? Please call 0345 646 2711 or drop us a line and tell us about the site. We will talk you through the work and send you a fixed quote before you commit to anything.
Nearby places to Stanmore
Other services in Stanmore
What happens on the day
There’s very little for your team to do on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Managed blocks in London often need contractors booked in ahead, and we are happy to deal with the agent directly for a site in Stanmore.
- Post-clean verification is booked once the clean is done.
- We open the access points used on the clean.
- We repeat the WFTT or DTT readings.
- Photos are taken to show the condition after the clean.
- We report the findings and flag any areas that need more work.
Before we arrive
- Allow time for equipment near the work to be turned off and cool down
- Find the previous report, if there is one
- Move anything stored near the system
Getting a quote
If you need TR19 inspection in Stanmore, ring 0345 646 2711 or use the quote form. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. A fixed quote normally follows within one working day.
Related advice
How the job changes from site to site
Extract fan and discharge
A greasy fan works harder and wears faster. Readings show if it needs attention before the next clean.
Canopy and plenum
Behind the filters, the plenum catches plenty of grease. We take readings there and photograph it on every inspection.
Why act early in Stanmore
Catching heavy deposits early keeps the fix small. Ignored, the layer only gets thicker. For a site in Stanmore, fitting the work in overnight now is far easier than closing at short notice later.
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. You will have a fixed price before work begins.
Why Stanmore businesses choose us
- A single point of contact for sites across the South East and London
- A fixed price before any work starts
- We diagnose before we treat
- Fully insured
Read what affects the cost and our accreditations.
Staff cleaning versus specialist work
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That’s our job.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Kitchen extracts in Stanmore
Food Standards Agency data counts about 110 restaurants, cafés and works canteens and about 40 takeaways and sandwich shops within 1.5 miles or so of the middle of Stanmore. For any of them with a canopy, measuring grease is better than guessing when to clean. Food hygiene inspections in Stanmore are the job of Harrow council’s environmental health team. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked. Overnight is the normal time to clean a London kitchen extract, so trading isn’t affected.
Historic houses near Stanmore, such as Headstone Manor about 2.5 miles south-west, are a reminder that older buildings with event kitchens can have long, awkward duct routes. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Royal National Orthopaedic Hospital is the nearest hospital to Stanmore, about 1.4 miles north. If you look after a school kitchen, at a school such as Whitchurch Primary School & Nursery or anywhere near Stanmore, the holidays are the usual time for a TR19® clean.
Stanmore is about 5 miles south-east of Watford, in Greater London. Wherever you are in the HA7 postcode area, we can take on TR19 inspection. Across Greater London, we cover 764 places, Stanmore among them. Our London page covers sites nearby (12 miles or so).
We cover every part of HA7, HA8 and HA3 for TR19 inspection and the roads nearby. TR19 inspection is available to premises on Church Road, London Road and Edgware Road High Street and the roads around them. With the A410 and B461 close by, Stanmore is simple for us to get to for TR19 inspection. If your site is just outside Stanmore, we cover Belmont (1 mile south-west), Brockley Hill (1 mile north), Harrow Weald (2 miles west), Bushey Heath (2 miles north-west) and Headstone (3 miles west). Larger places within reach include London (12 miles south-east), City of Westminster (9 miles south-east), Marylebone (9 miles south-east), Kensington (9 miles south-east), St Pancras (10 miles south-east) and Shoreditch (11 miles south-east).
Local landmarks in Stanmore
Locally, jobs take us to businesses close to Whitchurch Junior School, Avanti House School and Canons Park. The closest station to Stanmore is Harrow & Wealdstone station, about 1.9 miles south-west of the centre. Well-known places in the area include Hilfield Castle (3.2 miles north-west) and Cat Museum (1.7 miles south-west). For a walk, there’s Darland's Lake and Stanmore Country Park.
FAQs for Stanmore
Can you come to Stanmore after we close?
Yes, nights and weekends are routine for us. The work in Stanmore can fit around your hours. Tell us your opening hours when you ask for a quote.
Which fire authority looks after Stanmore?
London Fire Brigade is the fire and rescue service for Stanmore. TR19® is not law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.
Do you work in Stanmore?
Yes. Stanmore is part of the area we cover, as part of our area across London and the South East.
Is a quote from pictures possible?
In many cases, yes. With good photos, the site type and your last report, we can price many jobs. Where we can’t see enough, we arrange a survey.
Which accreditations do you hold?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’ve been trading since 2009 and we’re fully insured.
Do you offer maintenance contracts?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
How often should grease be tested?
Each report recommends when to test and clean next, based on the readings and how the kitchen is used. The interval should come from a competent person’s risk assessment backed by grease measurement.
What TR19 inspection can’t fix
Not every problem is solved by TR19 inspection, and we’d rather say so up front. It will not put right:
- Fire safety duties beyond the extract system
- Sections with no access, until panels are fitted
- Fan breakdowns, which need a repair visit
If you are not sure, just ring 0345 646 2711, or send details by email and we’ll give you a straight answer.
What the work covers
- Access surveys
- Insurer audits
- Post-clean checks
- Pre-clean surveys
- Wet film thickness tests
- Deposit thickness tests
Keeping the system healthy
Think of this as the after-treatment advice, short and simple:
- Wipe the canopy surfaces regularly
- Keep to the recommended interval
- Clean or swap grease filters as often as the kitchen needs
- Store grease readings where your insurer can see them
Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.
Fit access panels where the survey finds sections cannot be reached, so grease is not left building in hidden parts.