Greater London · HA8
Kitchen extract cleaning in HA8
Our technicians cover all of the HA8 postcode district, which takes in Burnt Oak, Edgware and Little Stanmore. Every TR19® clean ends with a certificate and photo report.
Where we work in HA8
- Burnt Oak
- Edgware
- Little Stanmore
- The Hale
- Canons Park
- Broadfields Estate
- Edgware Bury
- Stanmore
- Colindale
- Brockley Hill
What we do in HA8
- Extract fan repair and replacement
- Extract fan cleaning
- Canopy and hood cleaning
- Grease filter exchange
- Kitchen extract cleaning
- Commercial kitchen deep cleaning
- TR19 inspections and grease testing
- Ventilation duct cleaning
- Air handling unit cleaning
- Ductwork cleaning
- Grease trap cleaning
- Fire damper testing
- See all services
Let us know the job and your postcode for a quick quote: call 0345 646 2711 or drop us a line.
Kitchen extract cleaning in HA8: how it works
The part of the system nobody sees is often the dirtiest. Access panels let us into the duct runs and risers, scraping heavy deposits by hand before degreasing. Any section we can’t reach is recorded on the report, and new panels can be fitted. Typical jobs include extraction mentioned at an environmental health visit and fat running down the canopy edge, across horizontal duct runs, canopies and hoods and discharge points.
Our technicians bring everything the work needs, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes anything from a few hours to a full night, depending on the size of the system.
- We survey the system, from your photos or on site, canopy to discharge.
- Grease thickness is measured and the price is fixed before work starts.
- On the night, the equipment is off and cool and the kitchen is sheeted.
- We work through the system from the canopy to the fan and discharge.
- We re-test, photograph and send your certificate and photo report.
What you’ll pay
The cost depends on the size of the system, what state it’s in and access to every part of it. You get a fixed price before any work starts, so you know where you stand.
Why businesses in HA8 choose us
- Photo reports with every job
- CHAS, SafeContractor and ISO 9001
- Every job surveyed first
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, you get a fixed price before we start.
Around Burnt Oak
Around Burnt Oak, our work takes us to kitchens and buildings near The Annunciation RC Junior School, Railway Hotel and The Northgate School, among other places. Also close by are Watling Park (within half a mile south-west), St Martin's School Brentwood (0.7 miles north-east) and John Keble Church (within half a mile north). Burnt Oak’s nearest station is Mill Hill Broadway station, about 0.5 miles north-east. Other landmarks nearby include Church Farmhouse Museum (1.8 miles south-east) and Edgware Community Hospital (0.5 miles west). Not far away are Darland's Lake and Mill Hill Old Railway Nature Reserve.
Kitchen extract cleaning around HA8
Our kitchen extract cleaning work across HA8 takes in places such as Stanmore, Burnt Oak and Edgware and the villages in between. Every place on our HA8 list (10 in all) is covered, with cleans booked around trading hours.
Across London and the South East, we work evenings, overnight and weekends, so sites in HA8 can keep trading.
Burnt Oak: A hospital like Edgware Community Hospital, about 0.5 miles west, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Church and community hall kitchens, near John Keble Church or anywhere around Burnt Oak, are easy to forget, but their extracts collect grease like any other.
What the work involves, part by part
Extract fan and discharge
Attenuators, where fitted, can soak up grease and need attention. Where they can be cleaned, they are, and the report notes anything that can’t.
Ductwork and risers
Horizontal runs collect grease as the air slows and cools. We open access panels along the route and clean each section, recording any that cannot be reached.
When something else is needed
It’s worth knowing the limits before booking:
- Faulty fire dampers in the duct
- Ductwork that’s corroded, split or leaking (that is for a ductwork contractor)
- A grease trap that needs emptying
Why deal with it now?
A clogged extract doesn’t only raise the fire risk. Blocked filters and narrowed ducts slow the airflow, leaving the kitchen hot and smoky and the fan strains to keep up. Smells, dripping grease and condensation often follow.
Comparing quotes
- What hours they’ll be on site
- Exactly which parts of the system are covered
- Whether inaccessible sections are listed on the report
- Whether the quote is based on a survey or pictures
What your team can do, and what needs us
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, they should report it rather than try to fix it. We will take a look and send you a fixed quote.
For landlords and multi-site operators
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.
We regularly work with managing agents. Send the address, what’s needed and how access works and we will come back with a fixed quote.
Questions from HA8
What should I send you?
Just the basics: where it is, what kind of site, when it’s open and the access. Photos and the last report help too. After that, simply give us a ring on 0345 646 2711 or send us an email.
Do you cover HA8?
Yes. Our area takes in London and the counties of South East England, and that includes HA8.
Are you a BESCA Vent Hygiene Elite member?
We clean to BESA TR19® Grease as a BESCA Vent Hygiene Elite member, with certificates issued through the BESCA portal. We have been trading since 2009.
Do you clean the whole extract system or just the canopy?
We clean every part the grease travels through. That means canopy, plenum, filters, ducts, risers, fan and discharge, reached through access panels where necessary.
How much notice should we give?
The more notice, the better, particularly for night and weekend visits. Quotes normally come back within one working day, and there’s a 24/7 line for emergencies.
How long will the clean take?
Length of duct, grease levels and access all affect it. Most jobs take a few hours for a small kitchen, longer for a large system.
How often does a kitchen extract system need cleaning?
BESA guidance gives minimum intervals of 3, 6 or 12 months, depending on daily cooking hours. Heavy frying and grilling can mean shorter intervals, which grease thickness testing will show.