Hampshire · TR19 inspections and grease testing
TR19 Inspection in The Hangers
Looking for TR19 inspection in The Hangers? We diagnose first, fix the price and book the work around your hours, then sign off with a report and photos.
- Confirming a clean reached the whole system
- Surveys needed before quoting a full clean
- Uncertainty over how often to clean
TR19 inspection in The Hangers, done properly
Taking on a kitchen in The Hangers with no cleaning records? Start with an inspection. You get readings, photos and a clear view of what’s needed, before any cleaning is booked. If you have missing TR19 certificates or history and extracts that may be over the 200 micron mean, we can put it right.
Work in a small place like The Hangers starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
The sign-off is always in writing: a dated report with photos of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Where
- The Hangers (SO32)
- Region
- Hampshire
- Paperwork
- Certificate and photo report
- Quotes
- A fixed price before work begins
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Aftercare tips
Once we have finished, these simple steps help:
- Clean grease off the canopy between professional cleans
- Keep access panels clear and unpainted
- File every inspection report with your certificates
- Book the next test on the date in the report
After the inspection, we send a report showing each reading, its location and pictures. Keep it with your fire safety and TR19 records.
Test grease regularly instead of relying on the calendar. It spots changes in how fast grease builds.
Towns and villages near The Hangers
More services for The Hangers
How it works
Everything the job needs comes with us, from protective sheeting to tools and access equipment. All we need from you is clear access and the right equipment switched off. The visit takes around an hour or two per canopy and duct system. A few pictures of the system help us make the most of a visit to a place like The Hangers.
- We agree a time when the kitchen is closed or quiet.
- Every part of the system is examined, end to end.
- Grease readings are taken at set points using WFTT or DTT.
- Each test point and any access problems are photographed.
- You get a report with readings, photos and recommendations.
Before we arrive
- Tell us where we can park and unload
- Plan for cooking equipment or plant to be off before we arrive
- Clear loose items from the work area
Get a fixed quote
For a fixed quote, give us a ring on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We typically come back within one working day.
Advice
Fixed quotes for TR19 inspection in The Hangers
You’ll get a fixed price before work begins. It’s based on:
- How big the system is
- The condition of the system
- Whether it’s a one-off visit or part of a schedule
- Access, including roofs, risers and ceiling voids
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you are unsure, call 0345 646 2711 or email us for straight advice and a fixed quote.
Helping us quote
Before you ask for a quote, gather:
- The times we could work without disrupting the site
- The site address and the type of premises
- The roof, plant room or outside wall the system runs to
- Problems your staff have spotted
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
When something else is needed
Before booking, it helps to know what’s not included:
- Parts of the duct nobody can reach yet
- Installation problems, which fall under design guidance such as DW172
- A faulty or failing extract fan
Not sure which it is? You can give us a ring on 0345 646 2711 or send us an email and we’ll tell you honestly before booking.
What we work on in The Hangers
- Wet film thickness tests
- Insurer audits
- Access surveys
- Pre-clean surveys
- Deposit thickness tests
- Post-clean checks
TR19 inspection around The Hangers
The FSA’s data shows about 4 pubs and bars registered in The Hangers and the streets around it, up to about 1.5 miles out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Food hygiene inspections in The Hangers are the job of Winchester City council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after. The fire and rescue service for The Hangers is Hampshire and Isle of Wight Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
For schools such as Bishops Waltham Infant School, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed. A TR19® clean in The Hangers doesn’t stop at the filters: the plenum, ductwork, fan and discharge are cleaned too.
The Hangers is about 6 miles north-east of Hedge End, in Hampshire. Anywhere in SO32, we cover TR19 inspection for commercial sites. The Hangers is one of 683 places in Hampshire we cover for TR19 inspection. We also work in Southampton, around 10 miles away.
All of SO32 is within our area for TR19 inspection, from busy streets to back roads. Neighbouring places we cover for TR19 inspection include Dean (1 mile west), Upper Swanmore (1 mile south-east), Swanmore (2 miles south), Hill Grove (2 miles south) and Droxford (2 miles east). Larger places within reach include Winchester (8 miles north-west), Gosport (11 miles south), Havant (11 miles south-east), Eastleigh (7 miles west), Fareham (8 miles south) and Horndean (9 miles south-east).
Landmarks near The Hangers
Locally, jobs take us to businesses close to Swanmore College of Technology. The nearest railway station is Botley station, roughly 4.7 miles south-west of the centre. Other landmarks nearby include Bishop's Waltham Museum (1.6 miles south-west). Not far away are Beacon Hill and Bishops Waltham Branch LNR.
Leave it or put it right?
Surveying first means the clean goes to plan. Access problems are spotted in advance rather than on the night, and the quote reflects the real job. In a place like The Hangers, ductwork and fans are easy to forget until something goes wrong.
Working hours, access and the scale of the site can all change the price. We take each of them into account, and the price is fixed before we start.
What you get with us
- Trading since 2009
- Work around your opening hours, with 24/7 emergency cover
- One number for every site across the South East and London
- Photo reports with every job
Staff cleaning versus specialist work
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
The Hangers: your questions answered
Can you come to The Hangers after we close?
Yes, we can come after you close and finish before you open. The work in The Hangers can fit around your hours. Just call us on 0345 646 2711 or send us an email with your opening times and we’ll plan around them.
Who inspects food businesses in The Hangers?
In The Hangers, it’s Winchester City council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
What is grease thickness testing?
We measure the grease at set points with a WFTT or DTT test, and set against the TR19® Grease figures.
Can you set up regular visits?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. Each report recommends when the next visit should be.
How often should a kitchen extract be inspected?
That varies with the kitchen’s daily use. BESA’s minimum cleaning intervals are every 3, 6 or 12 months for heavy, moderate and light use, and grease readings help set the real interval.
How long does a TR19 inspection take?
As a guide, it takes an hour or two for a single kitchen, longer for a large or complex system. The size of the system and the access make the difference.
Is TR19 cleaning the law?
No, not in itself. The Fire Safety Order 2005 still requires the responsible person to manage fire risk, which in a kitchen includes grease in the extract. Many insurance policies also require TR19 adherence.
Do you work with multi-site operators?
Yes. We work across South East England and London, so sites at different addresses can be planned together on one programme. Each site gets its own report and pictures.
What the work involves, part by part
Vertical risers
Risers carry the extract up through the building. Grease can run down and collect at the base, so we check there.
Extract fan and discharge
Grease on the fan adds to wear. The inspection shows whether it needs cleaning now.