Hampshire · Fire damper testing
Fire and smoke damper testing in The Hangers
For fire damper testing in The Hangers, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Dampers affected by leaks or condensation
- Dampers that stick or won’t close fully
- Dirty dampers that may not close
Fire damper testing in The Hangers, done properly
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and checking that each blade moves fully and returns. If you are dealing with rusted damper blades and springs and dampers hidden with no access panel or hatch, we can put it right.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test typically starts with finding them all.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- The Hangers (SO32)
- Wider area
- Hampshire
- Paperwork
- Report and pictures after the visit
- Price
- Fixed quote, typically within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Landlords, agents and facilities managers
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.
Records are where multi-site compliance often slips. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
How the visit works
Every visit runs to the same pattern: protect the area, isolate whatever needs isolating, do the work, clear away and leave you the report. The visit itself takes anything from a couple of hours for a handful of dampers to a full day for a large building. In a small place like The Hangers, the journey is planned ahead and the visit arranged around the site’s hours.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we cannot reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Getting ready for the visit
- Let us know when the site is closed or quiet
- Mention any sign-in, permit or induction we need
- Arrange a key holder or contact on site
Get a fixed quote
We do not publish a price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, ring 0345 646 2711 or drop us a line.
Related advice
Places near The Hangers
Also in The Hangers
Fire damper testing around The Hangers
Food Standards Agency records list about 3 schools, colleges and universities registered as food businesses in The Hangers and the streets around it, up to about 1.5 miles out. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. The Hangers, about 60 miles from central London, is within our usual area. We work evenings, overnight and at weekends, so the visit fits around the site. The fire and rescue service for The Hangers is Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
For buildings in and around The Hangers, every damper is drop tested, reset and recorded.
The Hangers is about 6 miles north-east of Hedge End, in Hampshire. For fire damper testing in and around The Hangers, please phone us on 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, including The Hangers. The Hangers is one of 683 places in Hampshire where we work for fire damper testing. We also work in Southampton, about 10 miles from The Hangers.
All of SO32 is covered for fire damper testing, from the main roads to the quietest streets. Nearby, we also carry out fire damper testing in Dean (1 mile west), Upper Swanmore (1 mile south-east), Swanmore (2 miles south), Hill Grove (2 miles south) and Droxford (2 miles east). Within a short drive, we also cover Winchester (8 miles north-west), Gosport (11 miles south), Havant (11 miles south-east), Eastleigh (7 miles west), Fareham (8 miles south) and Horndean (9 miles south-east).
What’s near The Hangers
In The Hangers, that means kitchens and buildings near Swanmore College of Technology, among other places. The closest station to The Hangers is Botley station, roughly 4.7 miles south-west. Nearby you’ll also find Bishop's Waltham Museum (1.6 miles south-west). Open spaces near The Hangers include Beacon Hill and Bishops Waltham Branch LNR.
Common questions in The Hangers
Do you do school damper testing in The Hangers in the summer holidays?
Yes, out-of-term visits are normal for schools. Food Standards Agency records list about 3 schools, colleges and universities with registered kitchens within about a mile and a half of The Hangers. Tell us your holiday dates and we will book the visit for when the site is empty.
Can the work in The Hangers be done at night or at weekends?
Yes, evening, overnight and weekend work is normal for us. The work in The Hangers can fit around your hours. Tell us your opening hours when you ask for a quote.
Where does the waste go?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
Which kinds of sites do you work on?
All kinds of commercial and public premises: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
What if a damper has no access panel?
Any damper we cannot reach is listed on the report so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote for it.
Do you have insurance?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it for clients who vet their contractors.
Who is responsible for fire safety on the premises?
The law calls them the responsible person. It’s normally the employer, or whoever controls the building, and where several people have control, each can have duties. Your lease and fire risk assessment should make it clear.
Whose job is it to make sure fire dampers are tested?
It sits with the building’s responsible person. Depending on the building, that can be the employer, owner, landlord or whoever manages it. Our part is the testing and the records that show it’s been done.
In-house cleaning or a specialist?
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Fixed quotes for fire damper testing in The Hangers
Before we fix a price, we need to know a few things. We check:
- Whether several sites go on one quote
- Travel, parking and unloading
- One-off work versus a regular cycle
- Site requirements such as sign-in and permits
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
Helping us quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Any previous report or certificate
- The site address and the type of premises
- How we’d reach plant on a roof or in a plant room
- Detail shots of panels, filters and grilles
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Common problems we fix in The Hangers
Fusible links and springs do not last for ever. Damaged or painted links and weak springs mean the blade may stop short, which only shows up when the damper is dropped.
Any of these means the system needs a check-up:
- Dampers flagged on a fire risk assessment
- Fire dampers that fail to drop shut
- Fire dampers with no recent test record
- Dampers hidden with no access panel or hatch
If you manage a school site such as Bishops Waltham Infant School, any fire dampers can be tested in the holidays.
Questions to ask before booking
- Whether the quote is based on a survey or photos
- How VAT is shown on the quote
- What hours they’ll be on site
- Whether a written report and photos are included
Aftercare tips
Results last longer with the right care. We suggest:
- Act on failed dampers rather than leaving them on file
- Keep to at least yearly testing
- Store test records alongside the fire risk assessment
- Keep an eye out for damp around dampers
Tell other contractors where the dampers are, and ask them not to run cables through or wedge them. Anything they disturb should be checked again.
Deal with leaks and condensation near dampers quickly. Rusted parts are one of the main reasons dampers fail to close.
What happens if it’s left?
Fire risk assessors and insurers may ask to see damper test records. Having a current report ready for a building in The Hangers saves a scramble when the question comes. Equipment tucked in a roof space or outbuilding near The Hangers rarely gets looked at unless someone books it.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will explain each part.
Why The Hangers businesses choose us
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Fully insured
- A single point of contact for sites across the South East and London
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
See our cost guide and our accreditations.