Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Millbank, Kent
For TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Millbank, one call is all it takes: survey, fixed quote, work and sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- Insurance renewals needing proof of TR19 cleaning
- Kitchens whose menu or hours have changed
- Sections of duct that can’t be reached
TR19 inspection in Millbank, done properly
Insurance policies often require evidence of TR19® cleaning and inspection. Missing records can lead to a claim being reduced or refused. Our TR19 audits give sites in Millbank and across Kent a clear record of the system’s condition. If you have cleaning intervals that may not suit the kitchen and checking the result of a recent clean, we can put it right, from deposit thickness tests, post-clean checks and access surveys onwards.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. We agree access and timings in advance.
For insurers and inspectors, the record counts. That is why every job is written up in a report with photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Millbank (CT3)
- Region
- Kent
- Records
- Certificate and photo report
- Price
- A fixed price before we start
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Millbank kitchens: local notes
Millbank lies within about 3 miles of the sea. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. The Food Standards Agency lists about 4 pubs, bars and clubs as registered food businesses in and around Millbank, up to about a mile and a half out. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. The fire and rescue service for Millbank is Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
School kitchens, at schools like Hoath Primary School for example, are usually cleaned in the holidays so no lunches are lost. Where a hall near Church of the Holy Cross, or anywhere in Millbank, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Whitstable and Tankerton Hospital is the nearest hospital to Millbank, about 5 miles west.
Millbank is about 2 miles south-east of Herne Bay, in Kent. Wherever you are in the CT3 postcode area, we can take on TR19 inspection. Our area takes in 922 places across Kent, from busy centres to quieter spots. Our Maidstone page covers sites nearby, about 28 miles away.
All of CT3 is covered for TR19 inspection, from the main roads to the quietest streets. We also cover Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Larger places within reach include Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Local landmarks in Millbank
Typical jobs here are in premises near Spires Academy, Curtis Wood and The Huntsman And Horn Public House and the streets around them. The closest station to Millbank is Herne Bay station, about 2.4 miles north-west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (5 miles west). Not far away are West Blean and Thornden Woods.
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
When the building owner and the occupier are different, the lease normally sets out who maintains what. We are happy to deal with either side, and the report can go to both.
What affects the quote in Millbank
Your quote is based on your site. We consider:
- Parking and loading at the site
- When the work can happen, such as evenings, overnight or weekends
- Whether several sites go on one quote
- The condition we find in the survey
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. You will have a fixed price before work begins.
Asking for a quote
When you contact us, these details help:
- Detail shots of panels, filters and grilles
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Problems your staff have spotted
- The postcode and the type of business
We don’t publish a price list, because no two systems are the same. We look at your system first, from photos or on a visit, and then give you a fixed quote. To get going, call us on 0345 646 2711, or email photos.
Aftercare tips
Think of this as the after-treatment advice, in brief:
- File every inspection report with your certificates
- Send TR19 audit reports to your insurer on request
- Keep to the recommended interval
- Never cook with filters missing
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can arrange it.
Keep all TR19 records together so the history is easy to show.
What the work involves, part by part
Restaurants, pubs and hotels
Kitchens that cook for long hours build up grease faster. Readings show if the cleans are frequent enough.
Vertical risers
Access to risers is often limited. We record what can and can’t be reached.
In-house cleaning or a specialist?
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Millbank: your questions answered
Will you come out to Millbank?
Yes. Millbank is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Which environmental health team covers Millbank?
In Millbank, it’s Canterbury City council that carries out food hygiene inspections. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Can you come out in an emergency?
Yes. There’s a 24/7 emergency line for anything that cannot wait until a planned visit. Ring any time and tell us what’s happened.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, depending on what the system needs.
Which sectors do you work in?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
Is TR19 a legal requirement?
No. TR19® is BESA’s specification and the industry benchmark, not legislation. The law is the Fire Safety Order 2005, under which the responsible person must manage fire risk, and TR19® is what insurers and fire officers look to.
Can you work evenings and weekends?
Yes. Evenings, nights and weekends are normal working hours for us, so the site doesn’t lose a service.
Can one contract cover all our sites?
Yes. One number covers all your sites in our area, with visits on a regular schedule.
How the visit works
We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. The visit itself takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. If you can send pictures, we can arrive in Millbank knowing what to expect.
- The visit is arranged for when the kitchen is not busy.
- We look over the canopy, plenum, ducts, fan and discharge.
- Grease thickness is measured at set points by WFTT or DTT.
- We photograph the test points and record any sections we can’t reach.
- We send a report setting out the readings, pictures and next steps.
Before we arrive
- Let us know when the site is closed or quiet
- Tell us where we can park and unload
- Find the previous report, if there is one
Ask for a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
Nearby places to Millbank
Also in Millbank
Why act early in Millbank
If a kitchen in Millbank has been cleaned on the same calendar for years, there’s no way to know if that interval is right without measuring. Measured readings let a competent person set the interval. Our emergency line runs 24/7, but a planned visit to Millbank is calmer for everyone.
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Why Millbank businesses choose us
- One contact for all your sites in London and the South East
- CHAS, SafeContractor and ISO 9001
- Work around your opening hours, with 24/7 emergency cover
- A fixed price before any work starts