Kent · Ductwork cleaning
Ductwork cleaning in Millbank, Kent
Ductwork cleaning across Millbank and nearby, booked around your opening hours and signed off in writing with photos.
- Thick deposits at the bottom of a vertical duct
- An insurer asking for TR19 evidence
- A grease test showing the duct is overdue
Between visits
Think of this as the after-treatment advice, short and simple:
- Check readings when the menu changes
- Keep access panels clear of stored items
- Diarise the next duct clean
- Keep the fan on while anything is cooking
The report names every part of the duct that couldn’t be reached, with the reason. We can fit access panels so those sections are cleaned next time.
Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.
Ductwork cleaning for kitchens and businesses in Millbank
In doctor’s terms, the ductwork is the system’s arteries: find the blockages, clear them, then check the flow is right. Readings taken before and after show the difference, alongside before and after pictures. If you’re dealing with a grease test showing the duct is overdue and grease pooling at the foot of the riser, we can put it right, from horizontal duct runs, attenuators and bends and junctions onwards.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Good records are part of the job. You get a written report with photos after each visit, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Location
- Millbank (CT3)
- Region
- Kent
- Paperwork
- Certificate and photo report
- Price
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Also near Millbank
What else we do in Millbank
How the visit works
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes anything from a few hours to several visits, depending on the length of duct. Somewhere as small as Millbank, the date and timings are agreed with you well before the day.
- First the duct route is traced and every access point noted.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- Post-clean readings and pictures go into the report, with any unreachable section listed.
How to prepare
- Clear loose items from the work area
- Tell us the best time to work, such as after service or at a weekend
- Tell us where we can park and unload
Get a fixed quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711 or drop us a line.
Advice
Millbank questions
Do you work at weekends in Millbank?
Yes, evening, overnight and weekend work is normal for us. The work in Millbank can fit around your hours. When you give us a ring on 0345 646 2711 or use the quote form, mention when the site is quiet.
Which fire authority looks after Millbank?
That is Kent Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
What happens to the waste?
Waste is contained during the work and removed when we leave, including grease, debris and dirty water. None of it is left on site.
Can you price the work without visiting?
Usually, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we normally come back within one working day. Some sites still need a visit, and we’ll say so.
Who is responsible for fire safety on the premises?
The Fire Safety Order 2005 calls them the responsible person: often the employer, owner or occupier. In shared or managed buildings, a landlord, facilities manager or managing agent can share the duty.
What do you need from me for a quote?
Just the basics: where it is, what kind of site, when it’s open and the access. Photos and any previous paperwork make it quicker. Then ring 0345 646 2711 or use the quote form.
How long does it take to clean extract ducts?
Duct length, access and grease levels all affect it. Typically it takes a few hours for a short run, longer for long runs and tall risers.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
In-house cleaning or a specialist?
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
Why act early in Millbank
BESA guidance says grease shouldn’t exceed a mean of 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Leaving the duct makes those limits harder to keep to. It’s simpler to plan the work at Millbank now than to arrange it in a hurry later.
What you pay depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so there are no surprises.
Why choose Duct Doctor in Millbank
- A written report with pictures after every visit
- Survey first, then a fixed quote
- Accredited under CHAS and SafeContractor, with ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
Read how cleaning jobs are priced or how to check a contractor.
What a clean won’t put right
We won’t sell you work that does not address the problem, so these are the things it will not cover:
- Leaking duct joints that need repair
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
- Undersized or badly laid-out ducts
If in doubt, call 0345 646 2711 or email us and we will say what we think before you book.
Parts of the system we cover
- Bends and junctions
- Access panels
- Attenuators
- Vertical risers
- Multi-storey ducts
- Horizontal duct runs
How we price ductwork cleaning
The quote reflects the site in front of us. We take into account:
- Any permits to work or inductions
- Whether several sites go on one quote
- Whether it’s a one-off visit or part of a schedule
- Parking and loading at the site
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote and give you a fixed price before we start.
What to send for a quote
When you contact us, it’s useful to have:
- When the site is open and when it’s quiet
- Wide pictures of the system and the area around it
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Where the site is and what kind of site it is
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
What ductwork cleaning looks like in Millbank
Sea air reaches Millbank, which sits within about 3 miles of the coast. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. There are about 3 restaurants, cafés and works canteens in and around Millbank, up to about a mile and a half out, according to the Food Standards Agency’s register. Behind every canopy among them is a run of ductwork that collects grease out of sight. Millbank is covered by Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Bursars and site managers at schools such as Hoath Primary School tend to book extract cleaning for when the kitchen is empty. Healthcare kitchens, like those at hospitals such as Whitstable and Tankerton Hospital (about 5 miles west), often cook for long hours, which puts them in BESA’s heavier-use bands. Church and community hall kitchens, near Church of the Holy Cross or anywhere around Millbank, are easy to forget, but their extracts collect grease like any other.
Millbank is about 2 miles south-east of Herne Bay, in Kent. If you need ductwork cleaning in Millbank, it’s easy to get a fixed quote: please ring 0345 646 2711, or email photos. Our area covers London and the South East, Millbank included. Our area takes in 922 places across Kent, large and small. We also work in Maidstone, around 28 miles away.
Every address in CT3 is within our area for ductwork cleaning, from busy streets to back roads. Other places close to Millbank include Maypole (1 mile south), Old Tree (1 mile south-east), Highstead (1 mile north-east), Hoath (1 mile south) and Knave's Ash (1 mile south-west). Further out, we also cover Canterbury (6 miles south-west), Margate (10 miles east), Dover (15 miles south), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Landmarks near Millbank
Around Millbank, our work takes us to kitchens and buildings near Spires Academy, Curtis Wood and The Huntsman And Horn Public House. The nearest railway station is Herne Bay station, roughly 2.4 miles north-west. A little further out are Whitstable and Tankerton Hospital (5 miles west). Not far away are West Blean and Thornden Woods.
How the job changes from site to site
Bends and transitions
Bends, elbows and changes of size are where grease collects most. The air slows and drops its load, so these points get extra attention.
Horizontal duct runs
Flat runs of duct link the canopy to the riser or the outside wall. Grease drops out of the slowing air along them, so each section is cleaned through its access panels.