Kent · TR19 inspections and grease testing
TR19 Inspection in Hoath
Professional TR19 inspection in and around Hoath, booked around your opening hours and signed off in writing with pictures.
- Missing TR19 certificates or history
- Ductwork where grease may be over the TR19 limits
- Cleaning intervals that may not suit the kitchen
How we handle TR19 inspection in Hoath
A pre-clean survey is the diagnosis, and the clean is the treatment. We look at the system, take grease readings and photograph what we find, so the quote and the clean fit the real system. If you have insurers asking for TR19 evidence and missing access panels found on survey, we can help, from wet film thickness tests, deposit thickness tests and pre-clean surveys onwards.
Work in a small place like Hoath starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
A written report with pictures follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Hoath (CT3)
- Region
- Kent
- Paperwork
- TR19® certificate and photo report
- Price
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What affects the cost of TR19 inspection
There’s no set price list, because sites vary so much. The quote depends on:
- What state the system is in
- Any permits to work or inductions
- The scale of the work
- A single visit or a regular plan
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
Helping us quote
Photos let us diagnose from a distance. Try to include:
- Close-ups of filters, grilles, hatches or access panels
- Your last certificate, test record or report
- A few general shots of the system
- The site address and the type of premises
For TR19 inspection in Hoath, give us a ring on 0345 646 2711 or email us. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. A fixed quote typically follows within one working day.
More services for Hoath
Common questions in Hoath
Is TR19 inspection any different in a coastal place like Hoath?
It can. Hoath is within about 3 miles of the coast, and salt air speeds up corrosion. Corroded fixings and housings are noted on the report so they can be dealt with.
Who carries out food hygiene inspections in Hoath?
That’s Canterbury City council, whose environmental health officers carry out food hygiene inspections in Hoath. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
Is there a survey before the work?
Yes. We always survey first, either from photos and details you send or on a site visit. A fixed quote follows.
Can the work be done while we are closed?
Yes, and that is how we prefer to work. The visit is timed for when the area isn’t in use, such as late evening, overnight or a weekend.
Is TR19 cleaning the law?
No. TR19® is not law; it’s BESA’s specification. The law is the Fire Safety Order 2005, under which the responsible person must manage fire risk, and TR19® is what insurers and fire officers look to.
Do you cover Hoath?
Yes. We cover Hoath and across Kent, as part of our work across South East England and London. For a fixed quote, call 0345 646 2711 or drop us a line.
Can you inspect our extract for our insurance company?
Yes. Our TR19 audits cover readings, pictures, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.
Are you accredited?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
What your team can do, and what needs us
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We are happy to deal with either side, and the report can go to both.
What we do, step by step
Everything the job needs comes with us, including protection sheets, the right tools and access kit. You only need to give us clear access and switch off what needs to be off. On site, the work takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. If the van will struggle with a lane or gateway near Hoath, let us know and we’ll plan around it.
- The visit is arranged for when the kitchen is not busy.
- We look over the canopy, plenum, ducts, fan and discharge.
- Grease thickness is measured at set points by WFTT or DTT.
- Each test point and any access problems are photographed.
- You get a report with readings, photos and recommendations.
How to prepare
- Arrange a key holder or contact on site
- Clear loose items from the work area
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
To get a fixed quote, call 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We typically come back within one working day.
Related advice
Do you need TR19 inspection in Hoath?
Insurers, fire officers and environmental health officers look to TR19® as the benchmark. TR19® itself is not law, but the Regulatory Reform (Fire Safety) Order 2005 requires the responsible person to assess and reduce fire risk, and in a kitchen that means keeping grease under control.
Most sites get in touch when they notice something like this:
- An insurer’s request for a TR19 audit
- Ductwork where grease may be over the TR19 limits
- Kitchen extract systems with no recent grease readings
- Kitchens whose menu or hours have changed
A hospital like St Martins Hospital, about 4.6 miles south-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
Before booking anyone
- What happens if part of the system cannot be accessed
- Whether the quote shows VAT
- Proof of insurance
- If the quote is a fixed price or an estimate
Between visits
Results last longer with the right care. Here’s what we suggest:
- Store grease readings where your insurer can see them
- Tell us if menus or opening hours change
- Report grease dripping from the canopy
- Book the next test on the date in the report
You get a report with the grease readings, where they were taken and pictures of each point. File it alongside your TR19 certificates.
Clean, correctly fitted filters stop more grease reaching the duct. Missing or damaged filters let grease straight into the plenum.
What the work involves, part by part
Extract fan and discharge
Grease on the fan adds to wear. Readings show if it needs attention before the next clean.
Restaurants, pubs and hotels
We test between services, early in the morning or after close so the kitchen keeps cooking.
Kitchen extracts in Hoath
Sea air reaches Hoath, which sits within about 3 miles of the coast. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. Kent Fire and Rescue Service covers Hoath. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Kitchens in Hoath get their food hygiene inspections from Canterbury City council. Extraction counts as kitchen equipment, so its condition can come up on the day. Keeping each certificate and photo report on file helps show the extract is looked after.
Where a hall near Church of the Holy Cross, or anywhere in Hoath, hosts lunch clubs or events, its extract gathers grease just as a café’s does. If you look after a school kitchen, at a school such as Hoath Primary School or anywhere near Hoath, the holidays are the usual time for a TR19® clean.
Hoath is about 3 miles south-east of Herne Bay, in Kent. If you need TR19 inspection in Hoath, it’s easy to get a fixed quote: please call us on 0345 646 2711 or drop us a line. Our area covers London and the South East, Hoath included. Our Kent coverage runs to 922 places, and Hoath is one of them. Maidstone is in our area too, around 28 miles away.
Every address in CT3 is within our area for TR19 inspection, from the main roads to the quietest streets. Whether your site is on Church Road, Marley Lane and Barn Close or a nearby road, our technicians can take on the work. We also cover the places around Hoath: Maypole (1 mile north), Knave's Ash (1 mile west), Old Tree (1 mile north-east), Millbank (1 mile north) and Hollow Street (1 mile east). Larger places within reach include Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Landmarks near Hoath
Locally, jobs take us to businesses close to Spires Academy and Curtis Wood. The closest station to Hoath is Herne Bay station, roughly 2.9 miles north-west. Other landmarks nearby include St Martins Hospital (4.6 miles south-west). The countryside around Hoath includes West Blean and Thornden Woods.