Greater London · TR19 inspections and grease testing
TR19 inspections and grease testing in Mile End, Greater London
Professional TR19 inspection in and around Mile End, booked around your opening hours and finished with a written report and pictures.
- Pre-clean surveys before a first TR19 clean
- Confirming a clean reached the whole system
- Uncertainty over how often to clean
How we handle TR19 inspection in Mile End
Before any clean in Mile End, we survey the canopy, plenum, filters, ducts, fan and discharge. We check where the access panels are and whether every section can be reached, and grease readings are taken at set points. The work covers wet film thickness tests, post-clean checks and insurer audits, and common reasons people get in touch are sections of duct that can’t be reached and kitchens whose menu or hours have changed.
Across London, many commercial kitchens are squeezed into basements and narrow back-of-house spaces, and the duct may run up through several floors before it discharges at the roof. In Mile End, as elsewhere in the capital, a long duct run means more access points to open and more grease to remove.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Place
- Mile End (E3, E1, E14)
- Region
- Greater London
- Paperwork
- Certificate plus before-and-after photos
- Price
- Fixed quote, usually within a working day
- Hours
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
What happens on the day
We’re used to working while the site is closed. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. The visit itself takes a morning or less for one kitchen, more where there are several systems. Loading bays, visitor permits and roof access are the first things we ask about for a site in Mile End.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- You get a report and a fixed quote for the clean.
Preparing for the visit
- Move anything stored near the system
- Tell us where we can park and unload
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
Here’s what helps us quote: the address, the type of site and when it’s open, photos of the system and the last certificate or report, if there is one. Once you have those, call 0345 646 2711 or use the quote form.
Read more
Staff cleaning versus specialist work
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. The inside of ducts and units needs a specialist.
Honest limits
TR19 inspection cannot fix everything, and we’ll tell you before any work starts. It does not solve:
- Fire safety duties beyond the extract system
- Sections with no access, until panels are fitted
- The grease itself, which needs a full or spot clean
If you’re not sure, just call us on 0345 646 2711, or email photos and we will give you a straight answer before booking.
Parts of the system we cover
- Post-clean checks
- Pre-clean surveys
- Access surveys
- Insurer audits
- Deposit thickness tests
- Wet film thickness tests
Why act early in Mile End
An EHO visit, an insurance renewal or a fire risk assessment is a bad time to find your extract records are thin. An inspection now gives a site in Mile End a current picture. A busy site in Mile End builds up dirt and wear quickly, so putting it off makes the eventual job larger.
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered, and you’ll get one fixed quote.
Why us?
- Survey first, then a fixed quote
- One number for every site across the South East and London
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Trading since 2009
Read what affects the cost and our accreditations.
Grease, kitchens and Mile End
The FSA’s food hygiene register includes about 92 pubs, bars and clubs and about 12 hotels, B&Bs and guest houses within roughly a mile and a half of the centre of Mile End. Wherever they cook, the canopy, duct and fan collect grease just as a restaurant’s do. London jobs normally start after the last service, with loading and roof access agreed with the building first. Mile End is covered by London Fire Brigade. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; St Clement's Hospital is the nearest hospital to Mile End, about within half a mile north-east. If you cook for passing trade around Limehouse station, the extract can be cleaned between your last and first customer. Church and community hall kitchens, near Holy Trinity Church or anywhere around Mile End, are easy to forget, but their extracts collect grease like any other.
Mile End is about 2 miles east of Whitechapel, in Greater London. Whatever kind of site you run in Mile End, TR19 inspection is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. Mile End is one of 764 places in Greater London we cover for TR19 inspection.
Every address in E3, E1 and E14 is within our area for TR19 inspection, from the main roads to the quietest streets. You will find streets such as Bow Road, Bale Road and Toby Lane, all of which we cover for TR19 inspection. Being close to the A1205, Mile End is easy for our technicians to reach for TR19 inspection. We also cover the places around Mile End: Bow (1 mile north), Bow Common (1 mile south-east), Bromley (1 mile east), Limehouse (1 mile south) and Donnybrook Quarter (1 mile north). Within a short drive, we also cover London (3 miles south-west), City of Westminster (5 miles west), Marylebone (5 miles west), Kensington (8 miles west), St Pancras (4 miles west) and Walthamstow (4 miles north).
Around Mile End
Typical jobs here are in premises near Central Foundation Girls' School, Malmesbury Primary School and Mile End Park. The nearest railway station is Limehouse station, about 0.9 miles south of the centre. Nearby you will also find St Clement's Hospital (within half a mile north-east) and Museum of the Book (0.8 miles south). For a walk, there’s Old Ford Island and Tower Hill.
How we price TR19 inspection
You will get a fixed price before any work starts. It takes into account:
- A single visit or a regular plan
- How many systems or sites are involved
- How easy every part is to reach
- How big the system is
You won’t find a price list here, because the cost depends on the site in front of us. For a fixed quote, call 0345 646 2711 or drop us a line, and we’ll talk you through it.
Asking for a quote
There’s no need for technical detail. It helps if you can send:
- Problems your staff have spotted
- Your last certificate, test record or report
- The times we could work without disrupting the site
- Detail shots of panels, filters and grilles
Quotes are quick. Send a few details and pictures, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Common questions in Mile End
Can you work in Mile End outside opening hours?
Yes, out-of-hours work is a big part of what we do. That way a site in Mile End does not have to lose a day’s trading. Your opening times are the first thing we ask for.
Can a school canteen extract in Mile End be done out of term time?
Yes, and it’s the easiest time to do it. The FSA’s register shows about 84 schools and colleges with food registrations within roughly a mile and a half of Mile End. Tell us your holiday dates and we’ll book the visit for when the site is empty.
Why survey before a clean?
We look at the system from canopy to discharge, take grease readings and check access. It lets us plan the clean and send you a fixed quote.
Can one contract cover all our sites?
Yes. One number covers all your sites across London and the South East, and visits can be set on a regular cycle.
How long does grease testing take?
Testing takes a couple of hours for a typical kitchen extract system. Large or multiple systems take longer, so phone us on 0345 646 2711 or use the quote form and we will plan it.
How do you measure grease in a kitchen extract?
Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. The results are given in microns.
How much notice should we give?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Is Mile End in your area?
Yes. Our technicians work in Mile End, as part of our area across London and the South East.
Nearby places to Mile End
Also in Mile End
How the job changes from site to site
Horizontal duct runs
If a run has no access panel, we note it so it can be fixed before the clean.
Schools, hospitals and care homes
Hospital and care home kitchens can cook all day, every day. Testing shows if the cleaning interval keeps pace.
Looking after it afterwards
After the visit, a few habits help the work last:
- Tell us if menus or opening hours change
- Keep the route to access panels clear
- Never cook with filters missing
- Clean grease off the canopy between professional cleans
You get a report with the grease readings, where they were taken and pictures of each point. File it alongside your TR19 certificates.
Test grease regularly instead of relying on the calendar. It shows if build-up is speeding up.