Kent · Extract fan cleaning
Extract Fan Cleaning in Hoath
Specialist extract fan cleaning for Hoath: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A fan coated in grease inside its housing
- A fan left out of previous cleans
- A noisy fan that has got louder over time
Extract fan cleaning for kitchens and businesses in Hoath
Any fan serving a kitchen in Hoath is cleaned the same careful way as anywhere else: isolated first, then opened, scraped and degreased. Your report shows the impeller as we found it and as we left it. Common call-outs are for a fan that has never been cleaned and a fan that no longer moves enough air, on fan housings, axial fans and discharge points.
Work in a small place like Hoath starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Each visit ends with a written report and pictures, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Hoath (CT3)
- Region
- Kent
- Paperwork
- Certificate plus before-and-after photos
- Quotes
- A fixed quote up front
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
For landlords and multi-site operators
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we are happy to quote for all of it.
What else we do in Hoath
Common problems we fix in Hoath
A fan collects more grease when the filters let more through. Missing, damaged or badly fitted filters let grease travel the whole system, so the fan takes far more than it should.
The symptoms we are asked about most include:
- Less air being pulled from the kitchen
- A fan that has never been cleaned
- A heavily greased fan housing
- Rough running from the extract fan
Term dates shape school work: for a school like Hoath Primary School, an extract clean fits neatly into a half-term or summer break.
What your quote should include
- What’s included in the scope, part by part
- Whether a survey comes first
- How areas they cannot reach will be recorded
- What hours they’ll be on site
Extract fan cleaning in Hoath: the local picture
At about 3 miles from the coast, Hoath is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Hoath sits within the area of Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Environmental health officers from Canterbury City council inspect food businesses in Hoath. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Healthcare kitchens, like those at hospitals such as St Martins Hospital (about 4.6 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands. Volunteers running a hall kitchen near Church of the Holy Cross, or anywhere in Hoath, may not know when the extract was last cleaned, and a grease test settles it.
Hoath is about 3 miles south-east of Herne Bay, in Kent. Hoath gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. We cover 922 places across Kent, large and small. There’s also a page for Maidstone, roughly 28 miles from Hoath.
Postcode districts we cover here for extract fan cleaning: CT3. You will find streets such as Church Road, Marley Lane and Barn Close, and we cover them all for extract fan cleaning. Neighbouring places we cover for extract fan cleaning include Maypole (1 mile north), Knave's Ash (1 mile west), Old Tree (1 mile north-east), Millbank (1 mile north) and Hollow Street (1 mile east). Within a short drive, we also cover Canterbury (5 miles south-west), Margate (10 miles east), Dover (15 miles south-east), Ramsgate (11 miles east), Broadstairs (12 miles east) and Whitstable (6 miles west).
Near you in Hoath
Around Hoath, our work takes us to kitchens and buildings near Spires Academy and Curtis Wood, among other places. For rail, the closest station is Herne Bay station, about 2.9 miles north-west. Other landmarks nearby include St Martins Hospital (4.6 miles south-west). Not far away are West Blean and Thornden Woods.
FAQs for Hoath
Can sea air affect extract fan cleaning in Hoath?
It can. Salt air reaches Hoath, which is within about 3 miles of the coast, and it speeds up rust. Outdoor metalwork near the sea is worth inspecting at every visit.
Can the work in Hoath be done at night or at weekends?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Hoath needn’t be disturbed. Just call us on 0345 646 2711, or send details by email with your opening times and we will plan around them.
Do you provide a report after cleaning the fan?
A photo report shows the fan before and after. Full system cleans come with a TR19 certificate as well.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
How much notice do you need?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
Who has the legal duty for fire safety?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which may be the employer, owner, landlord, facilities manager or managing agent.
How long does extract fan cleaning take?
Size, access and build-up all affect it. Typically it takes a couple of hours per fan, depending on its size and the build-up.
What happens to the waste?
We take it away at the end of the visit. While we work, it’s kept contained to keep the area clean.
How it works
The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. The work on site takes an hour or two for one fan, longer when it’s hard to reach, and the area is cleaned down before we leave. Photos of the system and how to reach it help us plan a visit to Hoath.
- First we check the fan’s condition and how it sounds.
- Once isolated, we open the fan up.
- Each blade is cleaned so the impeller runs evenly.
- Housing, outlet and the area around the motor are cleaned.
- We run the fan and note its condition in the photo report.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Move anything stored near the system
- Tell us about site rules, permits or sign-in
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Read more
When it’s something else
An honest diagnosis matters more to us than a booking, so here’s what extract fan cleaning will not do:
- Electrical faults in the fan’s supply or controls (an electrician’s job)
- A failed motor or worn bearings (that needs a fan repair or replacement)
- An undersized fan that cannot cope
Not sure which it is? You can give us a ring on 0345 646 2711, or send details by email and we’ll tell you honestly before you book.
What the work covers
- Centrifugal fans
- Fan housings
- In-line fans
- Roof-mounted fans
- Axial fans
- Discharge points
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Part by part
Fan housings and motors
Motors and their electrics are kept dry and treated with care, and the fan is isolated throughout. Grease on and around the motor can trap heat, so the surrounding area is cleaned carefully.
Roof-mounted fans
A roof fan sits in cooler air, so grease can settle heavily. We scrape and degrease the blades and casing.
Why deal with it now?
A greasy fan at the discharge can spread grease onto the roof or wall around it. It marks the area around the outlet and leaves more fuel outside, which is one more reason to keep it clean. Systems in rural buildings are often out of sight and out of mind.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will go through it with you.
Why Hoath businesses choose us
- CHAS and SafeContractor accredited, with ISO 9001
- Out-of-hours work and a 24/7 emergency line
- Survey first, then a fixed quote
- Fixed quotes, typically within one working day
See what affects the cost and our accreditations and certificates.