Kent · TR19 inspections and grease testing
TR19 inspections in Chislet
TR19 inspection in Chislet from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Parts of the system left out of past cleans
- Heavy grease suspected in the plenum or ducts
- Extracts that have never been grease tested
TR19 inspection for kitchens and businesses in Chislet
BESA’s minimum cleaning frequencies depend on how long the kitchen cooks each day: every 3 months for heavy use of 12 to 16 hours a day, every 6 months for moderate use of 6 to 12 hours, and every 12 months for light use of 2 to 6 hours. Those are minimums, and grease readings help set the real interval. If you are dealing with sections of duct that can’t be reached and extracts that have never been grease tested, we can help.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Place
- Chislet (CT3)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quote
- Fixed quote, usually within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Why deal with it now?
Sites in Chislet that have never measured grease can’t tell whether their cleaning interval suits the kitchen. Testing gives you the evidence to set it properly. In a place like Chislet, ductwork and fans are easy to forget until something goes wrong.
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re unsure, ring 0345 646 2711 or drop us a line for straight advice and a fixed quote.
Why Chislet businesses choose us
- Work around your opening hours, with 24/7 emergency cover
- One contact for all your sites in London and the South East
- CHAS and SafeContractor accredited, with ISO 9001
- We are fully insured
See how cleaning jobs are priced and our accreditations and certificates.
What TR19 inspection looks like in Chislet
Sea air reaches Chislet, which sits within about 3 miles of the coast. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. The FSA’s food hygiene register shows about 3 restaurants, cafés and canteens in Chislet and the streets around it, up to about 1.5 miles out. A WFTT or DTT reading tells each of those kitchens whether its grease is staying under the 200-micron mean. The fire and rescue service for Chislet is Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Church and community hall kitchens, near Church of St Mary the Virgin or anywhere around Chislet, are easy to forget, but their extracts collect grease like any other. Term dates shape school work: for a school like Chislet Church of England Primary School, an extract clean fits neatly into a half-term or summer break.
Chislet is about 3 miles south-east of Herne Bay, in Kent. Whether your site is in the middle of Chislet or further out, we cover TR19 inspection for every kind of premises, from a single unit to a large public building. Chislet is one of 922 places in Kent we cover for commercial clients. Maidstone is in our area too, about 29 miles from Chislet.
We work across CT3 for TR19 inspection and the streets around it. Nearby, we also carry out TR19 inspection in Hollow Street (1 mile south-west), Chitty (1 mile east), Boyden Gate (1 mile north), Old Tree (1 mile west) and Hoath (1 mile west). Larger places within reach include Canterbury (6 miles south-west), Margate (9 miles east), Dover (14 miles south), Ramsgate (10 miles east), Broadstairs (10 miles east) and Whitstable (7 miles west).
Around Chislet
We work in commercial kitchens and buildings around Grove Ferry Picnic Area. For rail, the closest station is Herne Bay station, roughly 3.7 miles north-west of the centre. Other landmarks nearby include St Martins Hospital (5.5 miles south-west). For a walk, there’s West Blean and Thornden Woods.
What your team can do, and what needs us
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
How the visit works
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool first, and floors and nearby surfaces are sheeted. On site, it takes around an hour or two per canopy and duct system. Visits to a village like Chislet are booked in advance, at a time that suits whoever runs the site.
- Post-clean verification is booked once the clean is done.
- We open the access points used on the clean.
- Grease readings are taken again at set points.
- We photograph each area to record how it was left.
- The results are reported, with anything missed flagged.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Arrange a key holder or contact on site
- Let us know about parking and loading
How to get a quote
We don’t publish a price list, because no two systems are the same. We look at your system first, from pictures or on a visit, then send a fixed quote. To get going, ring 0345 646 2711, or send details by email.
Read more
When it’s something else
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- Ductwork that was designed or installed badly
- Heavy deposits found on test, which still need cleaning
- Mechanical faults in the extract
Not sure which it is? You can call 0345 646 2711 or email us and we’ll tell you honestly.
Where we work
- Wet film thickness tests
- Pre-clean surveys
- Access surveys
- Post-clean checks
- Insurer audits
- Deposit thickness tests
Places near Chislet
More services for Chislet
Common questions in Chislet
Who carries out food hygiene inspections in Chislet?
Kitchens in Chislet are inspected by Canterbury City council’s environmental health officers. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Which fire authority looks after Chislet?
Chislet is in the area of Kent Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Why survey before a clean?
It’s a look at the whole extract before it’s cleaned, with readings and pictures. We can work from photos and details, or visit, as suits the job.
What information do you need?
The site address, the type of premises and your opening hours, along with a few pictures and any previous report.
What is grease thickness testing?
The Wet Film Thickness Test (WFTT) and Deposit Thickness Test (DTT) measure how thick the grease is at a given point. We take readings at set points from canopy to fan.
Do you look at the system first?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Which sectors do you work in?
Commercial premises of every kind: kitchens, offices, schools, healthcare, retail, leisure and food production. Work is timed around how each site runs.
What is post-clean verification?
Verification means repeat readings and photos once the clean is done. The report flags anything missed.
What we are called out for in Chislet
Some parts of a system are hard to reach, and grease can be missed there clean after clean. A survey finds the sections that can’t be reached, so the gaps can be closed.
The symptoms we’re asked about most include:
- Extracts that have never been grease tested
- Sites with gaps in their extract records
- Sections of duct that can’t be reached
- Ductwork where grease may be over the TR19 limits
Healthcare kitchens, like those at hospitals such as St Martins Hospital (about 5.5 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands.
Comparing quotes
- Exactly which parts of the system are covered
- When they can work, and whether that’s outside your opening hours
- Whether the quote is based on a survey or pictures
- Proof of insurance
What affects the quote in Chislet
A fixed price needs a few facts first. We check:
- The size of the system
- Site rules, permits and inductions
- The condition of the system
- The number of sites or systems
The cost depends on how big the system is, what state it’s in and access to every part of it. You get a fixed price before we start, so there are no surprises.
Helping us quote
A few details help us quote accurately. With your enquiry, please include:
- When the site is open and when it’s quiet
- Problems your staff have spotted
- Wide photos of the system and the area around it
- The site address and the type of premises
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
For landlords and multi-site operators
Facilities teams in offices, schools and healthcare sites book us too across Kent. Larger estates can be phased building by building to keep disruption down.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.