Kent · Grease filter exchange
Grease Filter Exchange in Richborough Port
Grease filter exchange for Richborough Port, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Blocked baffle filters
- Grease building up behind the canopy filters
- Drips falling from the filters onto equipment
Looking after it afterwards
Results last longer with the right care. Here’s what we suggest:
- Always run the extract while cooking
- Tell us if the menu or opening hours change
- Clear anything stored on or near the canopy
- Never leave gaps in the filter bank
The next exchange is already in the diary. If the kitchen gets busier, the interval can be shortened to match.
Saturated filters let more grease through. A regular cycle keeps the rest of the system cleaner between full cleans.
Grease filter exchange in Richborough Port, done properly
A filter service works alongside TR19® cleaning, not instead of it. Clean filters reduce the grease reaching the ducts though vapour still carries some grease past them. That is why the whole system still needs cleaning to TR19 at the right interval. If you are dealing with filters that come out of the sink still dirty and filter washing that keeps being missed, we can help, from baffle filters, wall canopies and island canopies onwards.
For a kitchen in or near Richborough Port, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Richborough Port (CT13)
- Region
- Kent
- Paperwork
- Report and pictures after the visit
- Quote
- Fixed quote, usually within a working day
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Your questions about grease filter exchange in Richborough Port
Will you come out to Richborough Port?
Yes, we work in villages as well as towns, and Richborough Port is covered. A survey first, from photos or a visit, means we arrive with the right kit.
Does coastal air change anything about grease filter exchange in Richborough Port?
It can. Being within about 2 miles of the sea means more corrosion on metalwork in Richborough Port than inland. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and anything we remove is contained. At the end, the area is cleaned down.
Will you tell us when the next visit is due?
Yes. We put a recommended next date on the report. BESA’s minimum intervals for kitchen extracts range from 3-monthly for heavy use to 12-monthly for light use, and fire dampers need testing at least once a year.
Which accreditations do you hold?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
Which kinds of sites do you work on?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.
How far ahead should we book?
It depends on the time you need and how big the job is. Tell us your preferred dates when you ask for a quote, and for anything urgent, ring our 24/7 emergency line.
What’s the right interval for changing filters?
It depends on how much and what the kitchen cooks. Heavy cooking means more frequent changes than kitchens that cook less. We agree the interval with you.
What staff can safely do
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Why it’s worth doing now in Richborough Port
Grease dripping from the canopy is a sign the filters cannot hold any more. Drips land on surfaces and equipment below and that is the kind of thing inspectors look for. In a small place like Richborough Port, a system that fails can take a site out of use.
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote and give you a fixed price before any work starts.
What you get with us
- Photo reports with every job
- Accredited under CHAS and SafeContractor, with ISO 9001
- Work around your opening hours, with 24/7 emergency cover
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Read what affects the cost or our accreditations.
The process
Protection comes first: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. The work on site takes less than an hour in most kitchens, and we clear up before we go. The timing of a visit to Richborough Port is set by you, and the travel is our side of the planning.
- The filters in each canopy are measured and counted.
- We set the interval with you.
- The dirty set is lifted out.
- Clean filters go in and we check they sit snugly.
- The dirty filters leave with us and the next visit is booked.
Preparing for the visit
- Dig out any earlier paperwork for the system
- Tell us about site rules, permits or sign-in
- Name a contact who can let us in at the agreed time
Get a fixed quote
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work, before we start.
Related advice
Part by part
School, care home and staff kitchens
A longer exchange interval may suit lighter cooking. We agree the schedule to match.
Busy restaurant and pub kitchens
Kitchens that fry and grill all day load their filters fast. Their exchange schedule is typically the tightest.
What we are called out for in Richborough Port
Sometimes a filter is taken out and never put back. A missing filter leaves an open route into the system where it settles out of sight.
These are the problems we see most often:
- Blocked baffle filters
- A canopy that drips grease
- Grease building up behind the canopy filters
- Filters left unwashed on busy weeks
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Richborough Port is Ramsgate General Hospital, about 3.2 miles north-east.
Comparing quotes
- How they set the interval to the next visit
- Whether a written report and pictures are included
- Whether inaccessible sections are listed on the report
- Whether a survey comes first
Nearby places to Richborough Port
What else we do in Richborough Port
Grease, kitchens and Richborough Port
Richborough Port lies within about 2 miles of the sea. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. Food Standards Agency data counts about 7 restaurants, cafés and canteens across Richborough Port and its immediate surroundings (about a mile and a half). Clogged filters slow the airflow, and busy kitchens like these clog them fast. Richborough Port sits within the area of Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Term dates shape school work: for a school like Sir Roger Manwood's School, an extract clean fits neatly into a half-term or summer break. Historic houses near Richborough Port, such as Quex Park about 4.3 miles north, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
Richborough Port is about 4 miles south-west of Ramsgate, in Kent. Across the CT13 area, we cover grease filter exchange for commercial sites. Richborough Port is one of 922 places in Kent where we work for commercial clients. Our Maidstone page covers sites nearby, about 36 miles away.
Every address in CT13 is within our area for grease filter exchange, from busy streets to back roads. Other places close to Richborough Port include Ebbsfleet (1 mile north), Sevenscore (2 miles north), Cliffs End (2 miles north-east), Way (2 miles north) and Pegwell (2 miles north-east). We also work in nearby towns such as Canterbury (12 miles west), Margate (5 miles north), Dover (12 miles south), Ramsgate (4 miles north-east), Broadstairs (5 miles north-east) and Whitstable (14 miles west).
What’s near Richborough Port
Typical jobs here are in premises near Sandwich and Pegwell Bay, among other places. Richborough Port’s nearest station is Thanet Parkway station, roughly 1.8 miles north of the centre. Other landmarks nearby include Ramsgate General Hospital (3.2 miles north-east) and White Mill (2.1 miles south-west). For a walk, there’s Sandwich and Pegwell Bay.
Managing agents and facilities teams in Richborough Port
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.