Kent · Air handling unit cleaning
Air handling unit cleaning in Richborough Port, Kent
Cleaning of air handling units, including filters, coils, drain trays, fans and internal surfaces in Richborough Port, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Dirty fans and fan housings
- Plant that needs cleaning after a refit
- Intake sections clogged with outdoor debris
Honest limits
We won’t sell you work that doesn’t address the problem, so here are the limits:
- Problems with the unit’s controls or sensors
- Mechanical faults with motors, belts or bearings
- Ductwork downstream of the unit, which is a separate clean
Not sure which it is? You can give us a ring on 0345 646 2711 or drop us a line and we will tell you honestly.
Parts of the system we cover
- Supply and extract fans
- Heating and cooling coils
- Filter sections
- Drain trays
- Internal panels
- Dampers and louvres
AHU cleaning in Richborough Port
Where a building in Richborough Port has had little more than filter changes, there may be dirt on the coils, fan and casing that nobody has looked at. A full AHU clean takes in the whole unit. Common call-outs are for air handling units with blocked filters and stale or musty smells from the ventilation, across supply and extract fans, internal panels and dampers and louvres.
In rural areas, ventilation units are often in roof voids or outbuildings, where filters and drain trays get forgotten.
It’s worth checking any contractor’s accreditations. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Richborough Port (CT13)
- Region
- Kent
- Paperwork
- Report and pictures after the visit
- Quote
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026

Keeping the system healthy
Aftercare is simple, and it makes the next visit easier:
- Diary the inspection date recommended in the report
- Keep the area around the fresh air intake clear
- Store the TR19 paperwork where auditors can find it
- Flag stale or damp smells in the supply air
Keep filter changes on schedule between cleans, because good filters protect everything downstream. Record each change in the maintenance log.
Regular inspection under TR19® Air shows when cleaning is due, rather than waiting for a problem.
What we do, step by step
Each visit runs to the same pattern: sheeting and protection first, make the system safe, do the work, clear away and leave you the report. On site, the work takes anything from half a day for one small unit to several shifts for a plant room full of them. Somewhere as small as Richborough Port, the date and timings are agreed with you well before the day.
- We agree a shutdown window that suits the building.
- Before cleaning, each section is photographed.
- We work through the unit from the intake to the outlet.
- We finish with the fan section and the drain tray.
- After pictures are taken and the certificate issued.
How to prepare
- Arrange a key holder or contact on site
- Make sure equipment near the work can be switched off and left to cool
- Let us know about parking and loading
How to get a quote
There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, phone us on 0345 646 2711 or drop us a line.
Advice
Questions from Richborough Port
Will you come out to Richborough Port?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
Can the work in Richborough Port be done at night or at weekends?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Richborough Port needn’t be disturbed. Your opening times are the first thing we ask for.
Can you price the work without visiting?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.
What types of premises do you cover?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, as well as food production and leisure sites.
Are you insured?
Yes, we are fully insured. We also hold CHAS and SafeContractor for clients who vet their contractors.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
Is there a survey before the work?
Yes. We always survey first, from your pictures and details, or with a visit where necessary. A fixed quote follows.
Do you offer emergency callouts?
Yes, day and night, every day of the year. Our office is open from 8am to 6pm on weekdays, with the emergency line covering every other hour.
What happens if it’s left?
A slimy drain tray only gets worse. Leave it and you risk overflows, leaks into the space below and odours carried round the building. Dealing with it early keeps the clean straightforward. A fault that closes a site in a village like Richborough Port affects everyone who depends on it.
What you pay depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before we start, so there are no surprises.
Why book with us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Fixed quotes from a survey or pictures
- Trading since 2009
What your team can do, and what needs us
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
Places near Richborough Port
More services for Richborough Port
Signs you need AHU cleaning in Richborough Port
No filter stops everything. The fine dust that passes the filters lands on the coils, the fan and the internal panels, building up layer by layer.
Clients normally contact us after spotting something like this:
- Condensate trays that will not empty
- Odours coming through the supply air
- Air handling units due a clean after building work
- Dirty filters cutting the airflow
If you manage a school such as Sir Roger Manwood's School, ventilation cleaning is best booked for the holidays.
What your quote should include
- How areas they cannot reach will be recorded
- Which accreditations they hold, and whether you can check them
- Whether the quote shows VAT
- Proof of insurance
What the work involves, part by part
Heating and cooling coils
Because cooling coils run wet, the dirt on them tends to cling. The coil and its drain tray are cleaned as one job.
Filters
What’s on the filters is a good clue to what’s further in. They’re photographed before and after for your records.
What AHU cleaning looks like in Richborough Port
About 3.2 miles north-east of Richborough Port is Ramsgate General Hospital, the nearest hospital. Healthcare buildings depend on clean supply and extract ventilation, and the same applies to surgeries, clinics and care homes.
If you run a surgery, dental practice or care home near Richborough Port, clean ventilation matters as much to you as to a hospital like Ramsgate General Hospital (about 3.2 miles north-east).
Richborough Port is about 4 miles south-west of Ramsgate, in Kent. Whatever kind of site you run in Richborough Port, we can take on AHU cleaning. We can work out of hours so trading is not interrupted. Our Kent coverage runs to 922 places, Richborough Port among them. Our Maidstone page covers sites nearby (36 miles or so).
Here we cover the CT13 postcode area for AHU cleaning. Neighbouring places we cover for AHU cleaning include Ebbsfleet (1 mile north), Sevenscore (2 miles north), Cliffs End (2 miles north-east), Way (2 miles north) and Pegwell (2 miles north-east). Larger places within reach include Canterbury (12 miles west), Margate (5 miles north), Dover (12 miles south), Ramsgate (4 miles north-east), Broadstairs (5 miles north-east) and Whitstable (14 miles west).
Local landmarks in Richborough Port
Typical jobs here are in premises near Sandwich and Pegwell Bay, among other places. For rail, the closest station is Thanet Parkway station, roughly 1.8 miles north of the centre. Other landmarks nearby include Ramsgate General Hospital (3.2 miles north-east) and White Mill (2.1 miles south-west). Not far away are Sandwich and Pegwell Bay.