Kent · Grease filter exchange
Sevenscore grease filter exchange
Grease filter exchange for Sevenscore and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Grease collecting in the filter channels
- Hand-washed filters that still look greasy
- Weak extraction at the canopy
Kitchen extracts in Sevenscore
Sevenscore is within about 2 miles of the coast. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. The FSA’s food hygiene register shows about 10 restaurants, cafés and canteens and about 4 takeaways within roughly a mile and a half of the centre of Sevenscore. Any of those kitchens with a canopy relies on its filters to catch grease before it reaches the duct. Sevenscore sits within the area of Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Volunteers running a hall kitchen near St Mary, or anywhere in Sevenscore, may not know when the extract was last cleaned, and a grease test settles it. Quex Park, about 2.8 miles north-west, is one of the historic houses near Sevenscore; if you run event catering at a venue like that, cleans can be booked between functions.
Sevenscore is about 3 miles west of Ramsgate, in Kent. Sevenscore gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with pictures. We cover 922 places across Kent, from busy centres to quieter spots. Maidstone is in our area too, around 36 miles away.
All of CT12 is covered for grease filter exchange, from busy streets to back roads. Nearby, we also carry out grease filter exchange in Cliffs End (1 mile east), Way (1 mile north-west), Ebbsfleet (1 mile south), Richborough Port (2 miles south) and Manston (2 miles north-east). We also work in nearby towns such as Canterbury (12 miles west), Margate (4 miles north-east), Dover (13 miles south), Ramsgate (3 miles east), Broadstairs (4 miles north-east) and Whitstable (14 miles west).
Local landmarks in Sevenscore
We work in commercial kitchens and buildings around The Sportsman pub and Sandwich and Pegwell Bay, among other places. Sevenscore’s nearest station is Thanet Parkway station, roughly 0.7 miles east of the centre. Nearby you’ll also find Westwood Cross (3 miles north-east) and Ramsgate General Hospital (2.8 miles east). For a walk, there’s Sandwich and Pegwell Bay.
Grease filter exchange in Sevenscore, done properly
A clean set of filters is a simple, regular dose of prevention. Between full cleans, it keeps the airflow healthy and takes a messy task off your team. Full TR19 cleaning still comes at the right interval, with a certificate. The work covers wall canopies, baffle filters and mesh filters, and people most often call us about smoke and heat lingering under the hood and grease left in baffles after washing.
For a kitchen in or near Sevenscore, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Nothing is signed off by word of mouth: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Where
- Sevenscore (CT12)
- Wider area
- Kent
- Reporting
- Report and pictures after the visit
- Price
- A fixed price before any work starts
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
When to call us in Sevenscore
Wherever you are, Sevenscore included, filter washing is the job that gets skipped when the kitchen is busy. It only takes a couple of missed weeks for a filter bank to clog.
These are the problems we see most often:
- Weak extraction at the canopy
- Bent or damaged filters that do not sit properly
- Missing filters in the filter bank
- Blocked baffle filters
If you cook for passing trade around Thanet Parkway station, the extract can be cleaned between your last and first customer.
What to look for in a quote
- When the next visit should be, and why
- Whether the price is fixed
- Whether the quote is based on a survey or pictures
- What hours they’ll be on site
For landlords and multi-site operators
Facilities teams in offices, schools and healthcare sites book us too across Kent. Work can be phased by floor, building or site to keep disruption down.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept to a regular schedule.
Towns and villages near Sevenscore
Also in Sevenscore
Fixed quotes for grease filter exchange in Sevenscore
Every site gets its own quote. These are the things that affect it:
- The times the site is available
- The size of the system
- Whether we need access equipment or extra panels
- Any permits to work or inductions
Every site is different, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all make a difference.
Asking for a quote
What to send for a quote:
- Where the site is and what kind of site it is
- Problems your staff have spotted
- Detail shots of panels, filters and grilles
- Any previous report or certificate
To help us quote: the address, the type of site and when it’s open, a few pictures and any previous report or certificate. Then phone us on 0345 646 2711 or use the quote form.
Staff cleaning versus specialist work
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
When something else is needed
To be straight with you, some problems need a different fix:
- A canopy that does not capture the vapour properly
- Odours from the discharge that filters will not stop
- Grease deep in the extract system
If you’re not sure, just phone us on 0345 646 2711 or drop us a line and we will give you a straight answer before booking.
Where we work
- Wall canopies
- School and hospital kitchens
- Island canopies
- Mesh filters
- Restaurants and pubs
- Baffle filters
Your questions about grease filter exchange in Sevenscore
Is grease filter exchange any different in a coastal place like Sevenscore?
It can. Sevenscore is within about 2 miles of the coast, and salt air speeds up corrosion. We look at fans, cowls and fixings for rust as well as grease.
Can the work in Sevenscore be done at night or at weekends?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Sevenscore needn’t be disturbed. Your opening times are the first thing we ask for.
Which accreditations do you hold?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
Do you take the used filters away?
They leave with us. That’s how an exchange works: you always have a clean set fitted and nothing greasy left on site.
How long does the visit take?
On site, it takes well under an hour for most canopies. Bigger or more complicated systems take longer, and the quote will say how long.
Do you handle baffle and mesh filters?
The common types of grease filter: baffle and mesh. Mention how many canopies you have when you get in touch and we will confirm it on site.
Do you work in Sevenscore?
Yes. Our technicians work in Sevenscore, as part of our area across London and the South East.
Does a filter exchange replace TR19 cleaning?
It doesn’t. Some grease passes the filters as vapour and settles in the ducts and the whole system still needs its TR19 clean.
How the visit works
A visit follows the same order every time: sheeting and protection first, make the system safe, do the work, clear away and leave you the report. On site, the work takes well under an hour for most canopies. In a small place like Sevenscore, the journey is planned ahead and the visit arranged around the site’s hours.
- We record the number, size and type of your filters.
- We set the interval with you.
- The dirty set is lifted out.
- A clean set is fitted and checked for gaps.
- The dirty filters leave with us and the next visit is booked.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Tell us the best time to work, such as after service or at a weekend
- Mention any sign-in, permit or induction we need
Ask for a quote
There’s no standard price list, because every site is different. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, phone us on 0345 646 2711, or send details by email.
Read more
Aftercare tips
A little care between visits keeps the system in better shape. We recommend:
- Keep canopy surfaces wiped down
- Keep the canopy clear for exchange visits
- Keep every filter in place during service
- Always run the extract while cooking
The canopy looks cleaner and the air moves better right away. Always run the extract during cooking so they catch grease as intended.
Dripping filters are a clear sign they’re full. A clean set right away cuts the grease in the canopy and the plenum may need a clean as well.