Hampshire · Fire damper testing
Fire damper testing in Soake, Hampshire
Fire damper testing for Soake, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Fire dampers nobody can get to
- Buildings with no damper register
- Smoke dampers with no recent test
What affects the cost of fire damper testing
The quote reflects the site in front of us. We consider:
- Any permits to work or inductions
- Whether it’s a one-off visit or part of a schedule
- When the work can happen, such as evenings, overnight or weekends
- The size of the system
What you pay depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before any work starts, so there are no surprises.
What we need to know
We can often survey from pictures. Try to include:
- The roof, plant room or outside wall the system runs to
- A few general shots of the system
- When the site is open and when it’s quiet
- Any previous report or certificate
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price, before we start.
Fire damper testing in Soake
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. Common call-outs are for buildings with no damper register and corroded dampers in damp risers and plant rooms, on wall and floor dampers, offices and schools and hospitals and care homes.
For a building in or near Soake, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Soake (PO7)
- Wider area
- Hampshire
- Paperwork
- Written report with pictures
- Quote
- A fixed quote up front
- Hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
What staff can safely do
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Places near Soake
What else we do in Soake
What we’re called out for in Soake
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either one can hold the blade part-open.
Any of these means the system needs a check-up:
- Motorised smoke dampers due for testing
- Blades that jam part-way when released
- Buildings with no damper register
- Dampers that cannot be reached without an access panel
If you manage a care home or clinic near Soake, the testing that a hospital like Queen Alexandra Hospital (about 3.2 miles south) relies on applies to your dampers too.
Before booking anyone
- Proof of accreditation you can verify
- Whether the quote is based on a survey or photos
- What happens if part of the system cannot be accessed
- Whether they’re fully insured
What fire damper testing cannot fix
We’ll always give you a straight diagnosis, so here’s what fire damper testing won’t do:
- Signing off a building’s overall fire safety
- Designing the building’s fire compartments
- Dampers that were never installed where they’re needed
If in doubt, ring 0345 646 2711 or drop us a line and we’ll say what we think.
Parts of the system we cover
- Wall and floor dampers
- Fusible link fire dampers
- Hospitals and care homes
- Motorised smoke dampers
- Offices and schools
- Riser dampers
Fire dampers in Soake buildings
Food Standards Agency records list about 10 schools, colleges and universities and about 23 hospitals, care homes and childcare premises registered as food businesses within 1.5 miles or so of the middle of Soake. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. About 3.2 miles south of Soake is Queen Alexandra Hospital, the nearest hospital. Healthcare buildings rely on fire compartments to protect people who can’t easily move, and dampers keep those compartments sealed. The fire and rescue service for Soake is Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
A school like Denmead Junior School can have any dampers tested over half-term without disturbing lessons.
Soake is about 1 mile north-west of Waterlooville, in Hampshire. Whether your site is in the middle of Soake or further out, we cover fire damper testing for every kind of premises, from small sites to large estates. Soake is one of 683 towns, villages and districts in Hampshire we cover for fire damper testing. There’s also a page for Portsmouth, about 6 miles away.
Postcode districts we cover here for fire damper testing: PO7. If you need fire damper testing at premises on Soake Road and Hambledon Road or anywhere close by, we can help. Neighbouring places we cover for fire damper testing include Furzeley Corner (1 mile south-west), Hart Plain (1 mile east), Cowplain (1 mile east), Waterlooville (1 mile south-east) and Purbrook Heath (2 miles south). Within a short drive, we also cover Gosport (8 miles south-west), Havant (4 miles south-east), Eastleigh (14 miles west), Fareham (7 miles south-west), Hedge End (11 miles west) and Petersfield (9 miles north-east).
What’s near Soake
Locally, jobs take us to businesses close to The Mead End pub and The Cowplain School, among other places. Soake’s nearest station is Bedhampton station, about 3.7 miles south-east of the centre. Other landmarks nearby include Clanfield Earthwork (4.7 miles north-east) and Queen Alexandra Hospital (3.2 miles south). For a walk, there’s Southmoor Nature Reserve and Portsdown Hill.
Landlords, agents and facilities managers
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
How it works
Each visit runs to the same pattern: protect the area, make the system safe, carry out the fire damper testing, clear away and leave you the report. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Photos of the system and how to reach it help us plan a visit to Soake.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- We close everything up and send the results in a report.
Preparing for the visit
- Name a contact who can let us in at the agreed time
- Allow time for equipment near the work to be turned off and cool down
- Have your last certificate or report to hand
Get a fixed quote
Want a quote for fire damper testing? Please call us on 0345 646 2711 or send us an email with a few details about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Related advice
Your questions about fire damper testing in Soake
Do you work in villages like Soake?
Yes. Soake is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Can you work in Soake outside opening hours?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Your opening times are the first thing we ask for.
What happens to the waste?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. None of it is left on site.
What information do you need?
Some photos and a quick description of the system plus the address and your hours. If we need more, we’ll ask.
Do you carry out smoke damper testing?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
What if a damper has no access panel?
Any damper we cannot reach is listed on the report, so you know exactly what’s outstanding. Fitting an access panel is the usual fix, and we can quote for it.
Can you look after several sites?
Yes. We work across South East England and London, so sites at different addresses can be planned together on one programme. Every site has its own report.
Which kinds of sites do you work on?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Keep to at least yearly testing
- Never wedge or tie a damper open
- Keep an eye out for damp around dampers
- Keep damper test reports with the fire safety log
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.