Hampshire · Fire damper testing
Fire damper testing in Furzeley Corner, Hampshire
Need fire damper testing in Furzeley Corner? We diagnose first, fix the price and book the work around your hours, then sign off with a report and pictures.
- Dampers flagged on a fire risk assessment
- Gaps in the fire damper test log
- Dampers affected by leaks or condensation
Fire damper testing in Furzeley Corner, done properly
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We locate and test the dampers we can reach and record the ones we cannot, so you know where the gaps are. The work covers hospitals and care homes, offices and schools and riser dampers, and people most often call us about gaps in the fire damper test log and dust or grease build-up on damper blades.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test usually starts with finding them all.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Furzeley Corner (PO7)
- Region
- Hampshire
- Records
- Written report with pictures
- Quote
- A fixed quote up front
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Landlords, agents and facilities managers
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
How the visit works
Protection comes first: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. The work on site takes from an hour or two in a small building to several visits on a large estate, and the area is cleaned down before we leave. Somewhere like Furzeley Corner, lanes, gates and parking are worth mentioning in advance.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Before we arrive
- Make sure equipment near the work can be switched off and left to cool
- Let us know when the site is closed or quiet
- Arrange a key holder or contact on site
Getting a quote
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, ring 0345 646 2711 or send us an email.
Advice
How the job changes from site to site
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. When the link reaches its set temperature it melts, and the blade drops to close the duct. We release the blade, check it closes fully and reset it.
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.
Common questions in Furzeley Corner
Can you work in Furzeley Corner outside opening hours?
Yes, nights and weekends are routine for us. It means the site in Furzeley Corner keeps running as normal. Tell us your opening hours when you ask for a quote.
Who is the fire and rescue service for Furzeley Corner?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Furzeley Corner. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. Before we leave, we tidy up and clean down.
Do you certify fire dampers?
We test, record and report, rather than certify dampers to a standard. For each damper it shows the result and anything that needs putting right.
How often does BESA say fire dampers should be tested?
According to BESA guidance, dampers should be tested when they’re installed and then at least once a year. Spring-operated dampers need annual testing as a minimum.
What about areas you cannot get to?
We record them on the report, with photos where possible, and we explain what access is needed, for example new access panels.
Can you quote from photos?
Often, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
Do you work with multi-site operators?
Yes. Tell us the addresses and what each needs and we will quote them together.
Towns and villages near Furzeley Corner
Also in Furzeley Corner
Staff cleaning versus specialist work
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Staff cleaning and specialist work are not the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
Aftercare tips
After the visit, a few habits help the work last:
- Store test records alongside the fire risk assessment
- Keep the damper register up to date after any building work
- Keep to at least yearly testing
- Act on failed dampers rather than leaving them on file
The next test should be no more than a year away. BESA guidance is at least annual testing, and booking the same month each year keeps it simple.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
Leave it or put it right?
Faults found early are often simpler to put right. Left for years, corrosion and build-up can turn it into a full damper replacement. Somewhere as small as Furzeley Corner, losing a kitchen or building to a fault is felt by everyone who uses it.
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote and give you a fixed price before work begins.
What you get with us
- Ventilation hygiene specialists since 2009
- Survey first, then a fixed quote
- Each visit written up, with pictures
- A fixed price before any work starts
What fire damper testing looks like in Furzeley Corner
Furzeley Corner is within about 3 miles of the coast. Salt air speeds up corrosion, and corrosion is one of the things that can stop a fire damper closing. Food Standards Agency data includes about 9 schools, colleges and universities and about 9 caring premises (care homes, nurseries and hospitals) within 1.5 miles or so of the middle of Furzeley Corner. If any of them has ducted ventilation, its dampers need an annual drop test at least. Hampshire and Isle of Wight Fire and Rescue Service covers Furzeley Corner. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
If you manage a care home or clinic near Furzeley Corner, the testing that a hospital like Queen Alexandra Hospital (about 2.7 miles south) relies on applies to your dampers too. For schools like Denmead Junior School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
Furzeley Corner is about 1 mile west of Waterlooville, in Hampshire. Furzeley Corner gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with photos. Furzeley Corner is one of 683 towns, villages and districts in Hampshire where we work for commercial clients. We also work in Portsmouth, around 6 miles away.
We work across the PO7 postcode area for fire damper testing and the roads nearby. Local streets include Furzeley Corner, Sheepwash Lane and Furzeley Road, and we cover them all for fire damper testing. Other places close to Furzeley Corner include Soake (1 mile north-east), Waterlooville (1 mile east), Purbrook Heath (2 miles south), Hart Plain (2 miles east) and Cowplain (2 miles east). Larger places within reach include Gosport (7 miles south-west), Havant (4 miles south-east), Eastleigh (13 miles north-west), Fareham (6 miles south-west), Horndean (3 miles north-east) and Chandler's Ford (15 miles north-west).
Landmarks near Furzeley Corner
In Furzeley Corner, that means kitchens and buildings near The Mead End pub and Cowplain Community School, among other places. Furzeley Corner’s nearest station is Cosham station, roughly 3.3 miles south of the centre. Other landmarks nearby include Portchester Castle (4.2 miles south-west) and Queen Alexandra Hospital (2.7 miles south). Open spaces near Furzeley Corner include Portsdown Hill and St Clair's Meadow.
How we price fire damper testing
The survey tells us what the work involves. We look at:
- The condition of the system
- The number of sites or systems
- When the work can happen, such as evenings, overnight or weekends
- Site rules, permits and inductions
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all make a difference.
Helping us quote
When you call or email, it’s useful to have:
- Where the site is and what kind of site it is
- Problems your staff have spotted
- Your opening hours and when the area is out of use
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.