Hampshire · Fire damper testing
Fire damper testing in Gosport, Hampshire
Our technicians work in Gosport on fire damper testing. Out-of-hours visits, a fixed quote and a written report with photos as standard.
- Fire dampers that haven’t been tested for over a year
- Buildings with no damper register
- Blades that jam part-way when released
What fire damper testing cannot fix
Fire damper testing can’t fix everything, and we’ll tell you before any work starts. It will not put right:
- Approving the building’s fire strategy
- Holes around ductwork in fire-resisting walls
- Ductwork crossing a fire wall with no damper fitted
Not sure which it is? You can give us a ring on 0345 646 2711, or email photos and we will tell you honestly before booking.
What we work on in Gosport
- Motorised smoke dampers
- Offices and schools
- Fusible link fire dampers
- Hospitals and care homes
- Riser dampers
- Wall and floor dampers
Fire damper testing for kitchens and businesses in Gosport
Smoke dampers work differently from fire dampers. Smoke dampers are motorised and are opened and closed by a control system, so we test them by operating them through those controls and checking that each blade moves fully and returns. The work covers fusible link fire dampers, riser dampers and wall and floor dampers, and common reasons people get in touch are dampers clogged with dust or grease and smoke dampers with no recent test.
Many buildings in a town like Gosport have only a few dampers, but each one can seize if it’s never tested. Dust, grease and corrosion are the usual reasons a blade will not drop.
A written report with photos follows each visit, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Where
- Gosport (PO12, PO13)
- Region
- Hampshire
- Reporting
- Report and photos after the visit
- Price
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
The process
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes anything from a couple of hours for a handful of dampers to a full day for a large building. Send us pictures of the system and we can plan most of a visit in Gosport before we arrive.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we cannot reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
Before we arrive
- Allow time for equipment near the work to be turned off and cool down
- Have your last certificate or report to hand
- Arrange a key holder or contact on site
Get a fixed quote
To help us quote: the address, the type of site and when it’s open, photos of the system and the last certificate or report, if there is one. Then call us on 0345 646 2711 or send us an email.
Advice
Different parts, different methods
Schools, hospitals and care homes
Hospitals and care homes stay occupied around the clock. We plan the order of work with the site team so care is not interrupted.
Ceiling voids and risers
Damp plant areas are hard on dampers. Signs of corrosion or water are recorded so it can be dealt with.
Staff cleaning versus specialist work
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
Common questions in Gosport
Do you work overnight in Gosport?
Yes, evening, overnight and weekend work is normal for us. Your customers, staff or residents in Gosport needn’t be disturbed. When you ring 0345 646 2711 or send us an email, mention when the site is quiet.
Does coastal air change anything about fire damper testing in Gosport?
Yes, to a degree: at about 2 miles from the coast, Gosport gets salt-laden air that corrodes metal faster. Corroded dampers are recorded at the test, as corrosion can stop a blade dropping.
What does TR19 mean?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
Do you certify fire dampers?
We test, record and report, rather than certify dampers to a standard. It lists each damper, the result and any remedials needed.
Can you quote from photos?
Yes, for many jobs. Send a few wide photos plus close-ups of panels, filters or grilles, and a fixed quote normally follows within one working day. Some sites still need a visit, and we will say so.
What about areas you cannot get to?
Anything we cannot reach goes on the report, with a note of where it is, and we tell you what would make it reachable, such as extra access panels in ductwork.
Do you have insurance?
Yes. We are fully insured, and the details are available on request.
Do we need to close while you work?
Not normally. We work when the area is out of use, such as evenings, overnight, early mornings or weekends, so the site can carry on as normal.
Fixed quotes for fire damper testing in Gosport
A fixed price needs a few facts first. We check:
- How easy every part is to reach
- The size of the system
- Site rules, permits and inductions
- The times the site is available
Putting the work off seldom saves money. Problems in a system tend to grow, and a neglected system can mean more work. If you are not sure what’s needed, give us a ring on 0345 646 2711 or drop us a line for straight advice and a fixed quote.
Asking for a quote
Before you ask for a quote, gather:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Where the site is and what kind of site it is
- Close-ups of filters, grilles, hatches or access panels
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
Places near Gosport
What else we do in Gosport
What fire damper testing looks like in Gosport
Sea air reaches Gosport, which sits within about 2 miles of the coast. Near the sea, we look closely for rust on dampers serving intakes and louvres. The FSA’s food hygiene register lists about 33 schools, colleges and universities, about 40 care, childcare and hospital premises and about 3 hotels, B&Bs and guest houses with registered kitchens or food service in Gosport and the streets around it, up to about 1.5 miles out. If any of them has ducted ventilation, its dampers need an annual drop test at least. Gosport sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
A school like Brockhurst Primary School can have any dampers tested over half-term without disturbing lessons.
Gosport is in Hampshire. From the centre of Gosport to the outskirts, we cover fire damper testing for every kind of premises, from small sites to large estates. Across Hampshire, we cover 683 places, and Gosport is one of them.
We work across the PO12 and PO13 postcode area for fire damper testing and the streets around it. You’ll find streets such as Station Road, St Johns Square and Cockleshell Square, and we cover them all for fire damper testing. Main roads around Gosport include the A32 and B3333, so getting to you is simple for evening and night visits. Neighbouring places we cover for fire damper testing include Forton (1 mile south-east), Elson (1 mile north), Priddy's Hard (1 mile east), Bridgemary (1 mile north-west) and Rowner (2 miles north-west). We also work in nearby towns such as Havant (8 miles north-east), Eastleigh (14 miles north-west), Fareham (4 miles north-west), Horndean (9 miles north-east), Hedge End (10 miles north-west) and Waterlooville (8 miles north-east). As one of the bigger places in Hampshire, Gosport has a wide mix of commercial premises, all within our area for fire damper testing.
Landmarks near Gosport
Locally, jobs take us to businesses close to St Vincent College, Brune Park Community School and Queen's Head pub and the streets around them. Gosport’s nearest station is Portsmouth Harbour station, roughly 2 miles east. Well-known places in the area include Search (1.3 miles south-east) and Gosport War Memorial Hospital (0.8 miles south). Open spaces near Gosport include Portsdown Hill and West of the River Alver.
Looking after it afterwards
After the visit, a few habits help the work last:
- Add new dampers to the register as they’re fitted
- Keep an eye out for damp around dampers
- Act on failed dampers rather than leaving them on file
- Keep ceiling hatches and duct panels easy to open
After testing, you get a report listing each of the fire and smoke dampers we tested, with where it is and whether it passed. File it with your fire safety log so it’s ready when your assessor or insurer asks.
Make sure every damper can be reached. Where there’s no hatch, an access panel makes testing possible ahead of the next visit.
Do you need fire damper testing in Gosport?
In most buildings, Gosport included, dampers are out of sight in ceiling voids, risers and service shafts. Without an access panel nearby, they’re easy to forget, and one that can’t be reached cannot be tested.
These are the problems we see most often:
- Fire dampers with no recent test record
- Dampers that cannot be reached without an access panel
- Dirty dampers that may not close
- Fire damper items raised by an assessor
Healthcare buildings such as Gosport War Memorial Hospital (about 0.8 miles south) rely on fire compartments, and the dampers in them need testing at least annually.
Questions to ask before booking
- If the quote is a fixed price or an estimate
- Which accreditations they hold, and whether you can check them
- Whether the quote shows VAT
- How areas they cannot reach will be recorded