Greater London · Fire damper testing
Fire damper inspection in Romford
Fire damper testing for Romford, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Dampers flagged on a fire risk assessment
- Blades that jam part-way when released
- Smoke dampers with no recent test
Your questions about fire damper testing in Romford
Is parking a problem for work in Romford?
Parking and loading in London need planning, so tell us about bays, permits and building rules when you book. Where restrictions apply in the day, an evening or overnight visit normally gets round them.
Who is the fire and rescue service for Romford?
Fire safety enforcement in Romford is handled by London Fire Brigade. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Do we need to close while you work?
Not normally. We need the work area to ourselves while we’re on site, so we book a time when it would be closed anyway.
Do you test dampers in the evening or at weekends?
Yes, the visit is arranged to suit the site. Out-of-hours and weekend work is available if daytime testing would get in the way.
What paperwork do we get after testing?
After testing, we provide a report covering each damper, showing where it is, whether it passed and what we found. Keep it with your fire safety records.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Do you look at the system first?
Yes. Every job is surveyed first, either from pictures and details you send or on a site visit. A fixed quote follows.
What do you do to protect the area?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
About our fire damper testing in Romford
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. Common call-outs are for corroded dampers in damp risers and plant rooms and fire dampers with no recent test record, across offices and schools, fusible link fire dampers and hospitals and care homes.
Many London buildings have been through several fit-outs, and dampers are often left behind new ceilings with no way to reach them. In Romford, as across London, finding every damper and recording its access is part of the job.
A written report with pictures follows every visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Romford (RM1, RM7, RM11, RM2)
- Region
- Greater London
- Paperwork
- Photo report after each visit
- Price
- A fixed price before we start
- Hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Keeping the system healthy
Aftercare is simple, and it helps at the next visit:
- Diary the annual test well ahead
- Keep damper test reports with the fire safety log
- Keep an eye out for damp around dampers
- Act on failed dampers rather than leaving them on file
Pass the report to whoever keeps your fire risk assessment up to date, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
Keeping to at least annual testing stops small faults turning into failed dampers. Faults caught early are easier to fix.
Fixed quotes for fire damper testing in Romford
There’s no set price list, because no two systems are the same. The quote depends on:
- Whether we need access equipment or extra panels
- Parking and loading at the site
- Whether it’s a one-off visit or part of a schedule
- Site rules, permits and inductions
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
What we need to know
When you contact us, it’s useful to have:
- Problems your staff have spotted
- Wide photos of the system and the area around it
- Any previous report or certificate
- Detail shots of panels, filters and grilles
There’s no standard price list, because no two systems are the same. We look at your system first, from photos or on a visit, and then send you a fixed quote. To get going, give us a ring on 0345 646 2711, or send details by email.
What fire damper testing looks like in Romford
The FSA’s food hygiene register lists about 29 schools, colleges and universities, about 69 caring premises (care homes, nurseries and hospitals) and about 7 hotels and guest houses with registered kitchens or food service in and around Romford, up to about a mile and a half out. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Romford’s nearest hospital, Oldchurch Hospital, is about under half a mile south. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Testing in London is typically done zone by zone, evenings and weekends included, so occupants are not disturbed.
Wherever there are offices above shops, near Romford station or elsewhere in Romford, ductwork may cross fire-resisting floors, and any dampers need testing. If you manage a school site such as Concordia Academy, any fire dampers can be tested in the holidays.
Romford is about 12 miles west of Basildon, in Greater London. Whether your site is in the middle of Romford or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. Romford is one of 764 towns, villages and districts in Greater London where we work for commercial clients. We also work in London, about 13 miles from Romford.
Here we cover the RM1, RM7, RM11 and RM2 postcode area for fire damper testing. We cover sites on High Street, Market Place and Market Link and the roads around them. With the A1251 close by, Romford is simple for us to get to for fire damper testing. Neighbouring places we cover for fire damper testing include Rush Green (1 mile south-west), Collier Row (1 mile north), Rise Park (1 mile north), Becontree Heath (1 mile south-west) and Chadwell Heath (2 miles west). We also work in nearby towns such as London (13 miles south-west), City of Westminster (15 miles west), Marylebone (15 miles west), St Pancras (13 miles west), Shoreditch (12 miles west) and Walthamstow (9 miles west).
Near you in Romford
In Romford, that means kitchens and buildings near Lodge Farm Park, Frances Bardsley Academy for Girls and The Moon & Stars pub. There’s a railway station in Romford itself: Romford station. Nearby you will also find The Brewery (under half a mile south-west) and Oldchurch Hospital (within half a mile south). Not far away are The Chase Nature Reserve.
When it’s something else
In fairness, there are a few things this work won’t fix:
- Deciding where dampers should be fitted
- Fire alarm or control system faults behind a smoke damper
- Missing dampers that a designer needs to specify
If you’re not sure, just ring 0345 646 2711, or send details by email and we will give you a straight answer before you book.
Parts of the system we cover
- Hospitals and care homes
- Motorised smoke dampers
- Fusible link fire dampers
- Wall and floor dampers
- Offices and schools
- Riser dampers
Also in Romford
How the visit works
There are three stages on the day: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with pictures. The middle part takes longest, which takes anything from a couple of hours for a handful of dampers to a full day for a large building. We fit London jobs around the building rather than the other way round, so a visit in Romford is typically out of hours.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Preparing for the visit
- Let us know about parking and loading
- Tell us about site rules, permits or sign-in
- Agree a time when the area can be out of use
Get a fixed quote
To get a fixed quote, call us on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You’ll normally have a quote within one working day.
Read more
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We’ll take a look and send you a fixed quote.
When to call us in Romford
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has a duty to keep fire safety measures working, and dampers are part of those measures. Whoever that is, whether employer, owner, landlord, facilities manager or managing agent, needs to be able to show the dampers work.
Keep an eye out for these warning signs:
- Smoke dampers that need testing through their controls
- Fire dampers with no recent test record
- Dampers hidden with no access panel or hatch
- Dampers clogged with dust or grease
Historic buildings that have had ventilation added later can hide dampers in awkward places; Hare Hall, about 1.4 miles north-east, is one of the historic houses in the area around Romford.
What your quote should include
- If the quote is a fixed price or an estimate
- Whether they recommend a next date
- If they look at the system before pricing
- How areas they can’t reach will be recorded
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.