Hampshire · Fire damper testing
Rake fire damper testing
Looking for fire damper testing in Rake? We diagnose first, fix the price and book the work around your hours, finishing with a written report and pictures.
- Fire dampers that fail to drop shut
- Fire dampers nobody can get to
- Buildings with no damper register
About our fire damper testing in Rake
We are often asked to take on annual damper testing by the people who look after buildings in and around Rake. Send us the damper schedule or the drawings if you have them, and we’ll plan the visit around the building’s hours. The work covers wall and floor dampers, offices and schools and motorised smoke dampers, and the jobs we see most are dampers affected by leaks or condensation and dampers flagged on a fire risk assessment.
For a building in or near Rake, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
A written report with pictures follows each visit, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Place
- Rake (GU33)
- Wider area
- Hampshire
- Paperwork
- Report and pictures after the visit
- Price
- A fixed price before work begins
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Fire damper testing in Rake: local notes
The FSA’s food hygiene register lists about 7 care, childcare and hospital premises with registered kitchens or food service across Rake and its immediate surroundings (about a mile and a half). Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Rake is covered by Hampshire and Isle of Wight Fire and Rescue Service. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up. Rake’s nearest hospital, Chase Community Hospital, is about 4.2 miles north. Hospitals are a good example of a building with fire dampers across many floors and departments.
Site managers at schools such as Rake CofE Primary School normally find the summer break the easiest time for ceiling work like damper testing.
Rake is about 4 miles north-east of Petersfield, in Hampshire. For fire damper testing in and around Rake, please call us on 0345 646 2711 or send us an email for a fixed quote. We work across South East England and London, including Rake. Rake is one of 683 towns, villages and districts in Hampshire we cover for commercial clients. We also work in Portsmouth, around 19 miles away.
All of GU33 is covered for fire damper testing, from the main roads to the quietest streets. If you need fire damper testing at premises on London Road, Brewells Lane and St Patrick's Lane or anywhere close by, our technicians can take on the work. Neighbouring places we cover for fire damper testing include The Mint (1 mile north-west), Hill Brow (1 mile south-west), Liss (1 mile west), Liss Forest (1 mile north-west) and West Liss (2 miles west). Larger places within reach include Havant (14 miles south-west), Horndean (12 miles south-west), Aldershot (15 miles north), Alton (9 miles north-west), Waterlooville (14 miles south-west) and Petersfield (4 miles south-west).
Landmarks near Rake
In Rake, that means kitchens and buildings near The Sun Inn. Rake’s nearest station is Liss station, roughly 1.6 miles west. Well-known places in the area include Chase Community Hospital (4.2 miles north). Open spaces near Rake include Liss Riverside Railway Walk North and Wheeler's Down.
What a clean will not put right
Not every problem is solved by fire damper testing, and we’ll tell you before any work starts. It doesn’t solve:
- Fire-stopping gaps around the duct where it passes through the wall
- Approving the building’s fire strategy
- Designing the building’s fire compartments
If you’re not sure, just ring 0345 646 2711 or send us an email and we’ll give you a straight answer before booking.
What the work covers
- Hospitals and care homes
- Motorised smoke dampers
- Offices and schools
- Riser dampers
- Wall and floor dampers
- Fusible link fire dampers
What affects the cost of fire damper testing
The diagnosis comes before the price. We look at:
- The times the site is available
- Parking and loading at the site
- Site rules, permits and inductions
- Whether it’s a one-off visit or part of a schedule
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, and a neglected system can mean more work. If you’re not sure what’s needed, call 0345 646 2711, or email photos for straight advice and a fixed quote.
What we need to know
What to send for a quote:
- A few general shots of the system
- The roof, plant room or outside wall the system runs to
- Problems your staff have spotted
- Your last certificate, test record or report
We do not publish a price list, because every site is different. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, call 0345 646 2711, or send details by email.
What we’re called out for in Rake
Building work often happens right next to dampers. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
Most sites get in touch after spotting something like this:
- Dampers that stick or will not close fully
- Corroded dampers in damp risers and plant rooms
- Smoke dampers that need testing through their controls
- Damper actions from a fire risk assessment
If you manage a care home or clinic near Rake, the testing that a hospital like Chase Community Hospital (about 4.2 miles north) relies on applies to your dampers too.
Questions to ask before you book
- Whether the whole system is included, or only the parts that are easy to reach
- Whether the quote is based on a survey or photos
- What insurance they carry
- When they can work, and whether that is outside your opening hours
Staff cleaning versus specialist work
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. Leave those to us.
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
Managing agents and facilities teams in Rake
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
From a single site to a large estate, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with photos.
FAQs for Rake
Which fire authority looks after Rake?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Rake. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Do you work overnight in Rake?
Yes, nights and weekends are routine for us. Your customers, staff or residents in Rake needn’t be disturbed. Let us know the hours you are closed and we will book within them.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we’ll advise on what to do next.
Can you price the work without visiting?
Often, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
Is Rake in your area?
Yes. Our technicians work in Rake, within the South East and London area we cover.
What happens to dampers you can’t get to?
Any damper we cannot reach is listed on the report, so you know exactly what’s outstanding. Fitting an access panel is the usual fix, and we can quote to fit one.
What about areas you can’t get to?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
How long will damper testing take?
A visit takes a morning or an afternoon for a small number of dampers, longer where there are many. Bigger sites can be phased, and you can call 0345 646 2711, or send details by email to talk it through.
What happens on the day
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. From there, it takes anything from a couple of hours for a handful of dampers to a full day for a large building. Somewhere as small as Rake, the date and timings are agreed with you well before the day.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Have your last certificate or report to hand
- Name a contact who can let us in at the agreed time
Getting a quote
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before work begins.
Advice
Different parts, different methods
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. Signs of corrosion or water are recorded so the cause can be tackled.
Offices and retail
Each new fit-out brings a risk of damaged or covered dampers. Testing after a fit-out shows whether anything was disturbed.