Hampshire · Fire damper testing
Fire and smoke damper testing in Hill Brow
Professional fire damper testing in and around Hill Brow, booked around your opening hours and finished with a written report and photos.
- Missing or out-of-date damper records
- Dampers that can’t be reached without an access panel
- Smoke dampers that need testing through their controls
Fire damper testing for kitchens and businesses in Hill Brow
We are often asked to take on annual damper testing by the people who look after buildings in and around Hill Brow. Send us the damper schedule or the drawings if you have them, and we will plan the testing around when the building is in use. The work covers wall and floor dampers, fusible link fire dampers and hospitals and care homes, and common reasons people get in touch are buildings with no damper register and corroded dampers in damp risers and plant rooms.
Testing in a small place like Hill Brow is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Location
- Hill Brow (GU33)
- Region
- Hampshire
- Reporting
- Written report with pictures
- Quotes
- A fixed price before work begins
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
What we do, step by step
Every visit runs to the same pattern: sheeting and protection first, make the system safe, carry out the fire damper testing, tidy up and hand over the paperwork. The visit itself takes a few hours for a single floor, with bigger buildings phased over more than one visit. The timing of a visit to Hill Brow is set by you, and the travel is our side of the planning.
- We start with whatever records exist: registers, drawings or old reports.
- Dampers are located one by one and reached through their access panels.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- We report on every damper, with faults and suggested remedials set out.
How to prepare
- Let us know about permits to work or site inductions
- Tell us the best time to work, such as after service or at a weekend
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
How to get a quote
For a fixed quote, ring 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.
Advice
Looking after it afterwards
Simple habits between visits make a real difference. Our advice:
- Close off damper faults promptly
- Keep the damper register up to date after any building work
- Brief other trades about dampers in ceilings and risers
- Make sure access panels stay clear and usable
Pass the report to whoever keeps your fire risk assessment up to date, so the assessment reflects where the dampers stand. Faults on the report are worth closing off quickly.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
Honest limits
It’s worth knowing the limits before booking:
- Sign-off of the whole building’s fire safety
- Fire risk assessments, which need a fire risk assessor
- Ductwork crossing a fire wall with no damper fitted
Not sure which it is? You can call 0345 646 2711 or drop us a line and we will tell you honestly.
Parts of the system we cover
- Fusible link fire dampers
- Offices and schools
- Motorised smoke dampers
- Hospitals and care homes
- Wall and floor dampers
- Riser dampers
What the work involves, part by part
Ceiling voids and risers
Many dampers sit above suspended ceilings. We lift tiles where necessary and put them back as we found them.
Offices and retail
In shared buildings, some dampers sit inside tenants’ space. Access to each area is planned with whoever manages the building.
What staff can safely do
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
What fire damper testing looks like in Hill Brow
The FSA’s food hygiene register lists about 9 care, childcare and hospital premises with registered kitchens or food service in Hill Brow and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Hill Brow’s nearest hospital, Petersfield Community Hospital, is about 3.5 miles south-west. Where patients or residents may need help to leave a building, working dampers matter all the more. The fire and rescue service for Hill Brow is Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
If you manage a care home or clinic near Hill Brow, the testing that a hospital like Petersfield Community Hospital (about 3.5 miles south-west) relies on applies to your dampers too.
Hill Brow is about 3 miles north-east of Petersfield, in Hampshire. We carry out fire damper testing for commercial premises of every kind in Hill Brow and the rest of Hampshire. Across Hampshire, we cover 683 places, Hill Brow among them. Our Portsmouth page covers sites nearby, about 18 miles away.
Here we cover the GU33 postcode area for fire damper testing. You’ll find streets such as London Road, Plantation Road and Malvern Road, and we cover them all for fire damper testing. Being close to the B2070, Hill Brow is easy for our technicians to reach at any hour. Nearby, we also carry out fire damper testing in Durford Wood (1 mile west), Liss (1 mile north-west), West Liss (1 mile north-west), Rake (1 mile north-east) and The Mint (1 mile north). Further out, we also cover Havant (13 miles south), Horndean (10 miles south-west), Alton (9 miles north-west), Waterlooville (12 miles south-west), Petersfield (3 miles south-west) and Purbrook (13 miles south-west).
Local landmarks in Hill Brow
Locally, jobs take us to businesses close to Whistle Stop pub, among other places. For rail, the closest station is Liss station, roughly 1.1 miles north-west of the centre. Other landmarks nearby include Bear Museum (3.4 miles south-west) and Petersfield Community Hospital (3.5 miles south-west). The countryside around Hill Brow includes Liss Riverside Railway Walk South and Wheatham Hill.
Why it’s worth doing now in Hill Brow
When something goes wrong, people ask what checks were in place. Damper test records are part of that answer, and you can only produce records for tests that took place. A planned visit to Hill Brow is easier to arrange than an emergency callout.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will explain each part.
What you get with us
- Survey first, then a fixed quote
- In business since 2009
- We’re fully insured
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
Take a look at what affects the cost or our accreditations and certificates.
Towns and villages near Hill Brow
Also in Hill Brow
Hill Brow: your questions answered
Do you work overnight in Hill Brow?
Yes, nights and weekends are routine for us. That way a site in Hill Brow doesn’t have to lose a day’s trading. Your opening times are the first thing we ask for.
Which fire authority looks after Hill Brow?
Hill Brow is in the area of Hampshire and Isle of Wight Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Will we have to shut during the visit?
Not normally. Visits are timed for when the area is closed, such as overnight or at a weekend, so you keep your normal hours.
Is there a survey before the work?
Yes. Photos often do the job, and larger or hidden systems get a visit.
Is TR19 a legal requirement?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and without records, many insurers may refuse or reduce a claim.
Who has the duty to keep fire dampers working?
Under the Fire Safety Order 2005, it’s the responsible person, who might be the employer, owner, landlord, facilities manager or managing agent. They must keep fire safety measures, including dampers, in working order.
Do you have insurance?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it for clients who vet their contractors.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
What we’re called out for in Hill Brow
Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Common reasons sites call us include:
- Dampers clogged with dust or grease
- Fire dampers that fail to drop shut
- Corroded dampers in damp risers and plant rooms
- Smoke dampers that need testing through their controls
For schools like Liss Junior School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What to look for in a quote
- Exactly which parts of the system are covered
- How VAT is shown on the quote
- When the next visit should be, and why
- Whether inaccessible sections are listed on the report