Hampshire · Fire damper testing
Fire damper inspection in Aldershot
Need fire damper testing in Aldershot? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- Corroded dampers in damp risers and plant rooms
- Dirty dampers that may not close
- Motorised smoke dampers due for testing
Managing agents and facilities teams in Aldershot
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
About our fire damper testing in Aldershot
A drop test is simple in principle: we release the blade, watch it close fully, then reset it. We test dampers for sites in Aldershot and the rest of Hampshire, logging each one so the record builds year on year. We are often asked to deal with fire dampers with no recent test record and fire damper items raised by an assessor, on wall and floor dampers, fusible link fire dampers and hospitals and care homes.
Smaller commercial buildings in towns like Aldershot may have just a handful of fire dampers, but a damper that has never been tested can stick just as easily as one in a tower block. Dust, grease and corrosion are the usual reasons a blade won’t drop.
Good records are part of the job. You get a written report with photos after every visit, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s ready for an insurer, fire officer or EHO.
- Place
- Aldershot (GU11, GU12)
- Region
- Hampshire
- Paperwork
- Photo report after every visit
- Price
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
More services for Aldershot
Leave it or put it right?
A sticking blade caught on an annual test can be a small repair. Left for years, corrosion and build-up can turn it into a full damper replacement. A fresh certificate on file is the best thing to have when someone asks to see your records.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we’ll go through it with you.
Why us?
- Full insurance on every job
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- We diagnose before we treat
- Fixed quotes, normally within one working day
What fire damper testing looks like in Aldershot
Going by the FSA’s register, there are about 25 schools, colleges and universities, about 19 caring premises (care homes, nurseries and hospitals) and about 3 hotels, B&Bs and guest houses serving food in and around Aldershot, up to about a mile and a half out. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Fleet Community Hospital is the nearest hospital, about 4.7 miles north-west of Aldershot. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Aldershot sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Fleet Community Hospital, about 4.7 miles north-west of Aldershot, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests. If you manage an older building converted to a hotel or venue, like many historic houses in the area (Farnham Castle is about 2.7 miles south-west), finding every damper is the first job.
Aldershot is about 8 miles west of Guildford, in Hampshire. Whether your site is in the middle of Aldershot or further out, fire damper testing is available to all kinds of commercial premises, from a single unit to a large public building. Across Hampshire, we cover 683 places, Aldershot among them. We also work in Guildford, about 8 miles from Aldershot.
Work in GU11 and GU12 is surveyed, quoted and booked the same way as anywhere else. Local streets include Station Road, East Station Road and High Street, and we cover them all for fire damper testing. Main roads around Aldershot include the A323 and A325, so getting to you is simple for evening and night visits. Close by, we work in Weybourne (1 mile south-west), Badshot Lea (1 mile south), Heath End (1 mile south-west), Tongham (1 mile south-east) and Hale (2 miles south-west). Further out, we also cover Basingstoke (15 miles west), Farnborough (3 miles north), Fleet (4 miles north-west), Alton (11 miles south-west), Yateley (7 miles north-west) and Bordon (10 miles south-west).
Landmarks near Aldershot
Around Aldershot, our work takes us to kitchens and buildings near All Hallows Catholic School, Prince Consort's Library and Princes Gardens. Aldershot has its own railway station: Aldershot station. Well-known places in the area include Royal Army Dental Corps Historical Museum (1.6 miles north) and Farnham Castle (2.7 miles south-west). The countryside around Aldershot includes Claycart Hill and Rowhill Nature Reserve.
How the visit works
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Work in Aldershot is typically booked after closing, early in the morning or on a closed day.
- We plan access and timing with you first, including any out-of-hours work.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Make sure someone can let us in and lock up afterwards
- Let us know about permits to work or site inductions
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
For a fixed quote, call us on 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.
Read more
Do you need fire damper testing in Aldershot?
Dust settles on damper blades, runners and springs over the years. If the duct carries cooking vapour, a film of grease adds to it, and either can stop the blade dropping fully.
Most sites get in touch when they notice one of these:
- Dust or grease build-up on damper blades
- Motorised smoke dampers due for testing
- Blades that jam part-way when released
- Gaps in the fire damper test log
For schools like Talavera Junior School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What your quote should include
- How VAT is shown on the quote
- Whether the whole system is included, or only the parts that are easy to reach
- What hours they’ll be on site
- Which accreditations they hold, and whether you can check them
Aftercare tips
Looking after the system between visits is straightforward, and it helps at the next visit:
- Book the next test before the year runs out
- Close off damper faults promptly
- Make sure access panels stay clear and usable
- Warn anyone working in ceiling voids about the dampers
If we couldn’t get to a damper, the report says so and why, such as no access panel or a blocked hatch. Access panels can be fitted so those dampers are tested on the next visit.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.
When something else is needed
Not every problem is solved by fire damper testing, and we will tell you before any work starts. It does not solve:
- Ductwork crossing a fire wall with no damper fitted
- Deciding where dampers should be fitted
- Signing off a building’s overall fire safety
If you’re not sure, just ring 0345 646 2711 or email us and we will give you a straight answer.
Where we work
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers
- Wall and floor dampers
- Riser dampers
- Offices and schools
How the job changes from site to site
Ceiling voids and risers
Risers and service shafts often hold dampers at each floor. Testing goes floor by floor so each one is accounted for.
Offices and retail
Each new fit-out brings a risk of damaged or covered dampers. A test after the works shows the dampers still close.
Aldershot: your questions answered
Can you come to Aldershot after we close?
Yes, nights and weekends are routine for us. The work in Aldershot can fit around your hours. When you give us a ring on 0345 646 2711, or email photos, mention when the site is quiet.
Can fire dampers in schools around Aldershot be tested in the holidays?
Yes, out-of-term visits are normal for schools. Around Aldershot, the Food Standards Agency lists about 25 schools and colleges with registered kitchens within a mile and a half or so. You can phone us on 0345 646 2711 or use the quote form with the dates the site is empty.
Will we get a certificate for the dampers?
After testing, we provide a report covering each damper, with its location, its result and any faults. Keep it with your fire safety records.
How far ahead should we book?
The more notice, the better, especially for out-of-hours work. Quotes typically come back within one working day, and emergencies are covered by our 24/7 line.
What do you do to protect the area?
Floors and surfaces near the work are sheeted before we start, and waste is contained as we go. Before we leave, we tidy up and clean down.
What should I send you?
Where the site is, what it is and when it’s open, along with a few pictures and any previous report.
What does fire damper testing cost?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, usually ready within one working day.
Can you price the work without visiting?
Normally, yes. Send wide shots, close-ups of any access panels and anything that worries you, and we normally come back within one working day. If photos aren’t enough, we’ll survey first.