Hampshire · Fire damper testing
Fire damper testing in Bagmore, Hampshire
Fire damper testing for Bagmore, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Fire damper items raised by an assessor
- Corroded dampers in damp risers and plant rooms
- Gaps in the fire damper test log
Fire damper testing in Bagmore
Not every damper relies on heat. Smoke dampers are motorised and are opened and closed by a control system, so testing means running them through their controls and confirming every blade travels fully and comes back. The work covers riser dampers, motorised smoke dampers and offices and schools, and people most often call us about fire dampers nobody can get to and dampers clogged with dust or grease.
Testing in a small place like Bagmore is planned around the journey and access, and the test itself is the same as in any city building.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Place
- Bagmore (RG25)
- Wider area
- Hampshire
- Paperwork
- Written report with pictures
- Quotes
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
When it’s something else
We’ll always give you a straight diagnosis, so here’s what fire damper testing won’t do:
- Missing dampers that a designer needs to specify
- Sign-off of the whole building’s fire safety
- Control wiring problems outside the damper itself
Not sure which it is? You can ring 0345 646 2711 or send us an email and we will tell you honestly before you book.
What the work covers
- Motorised smoke dampers
- Offices and schools
- Fusible link fire dampers
- Riser dampers
- Hospitals and care homes
- Wall and floor dampers
Do you need fire damper testing in Bagmore?
Links and springs age like any other part. A link can be damaged, painted over or swapped for the wrong one, and a tired spring may not drive the blade home, and that only becomes clear during a drop test.
Clients usually contact us when they notice one of these:
- Dampers that can’t be reached without an access panel
- Dampers affected by leaks or condensation
- Dampers flagged on a fire risk assessment
- Blades that jam part-way when released
Hall Place, about 3 miles south, is one of the historic houses near Bagmore, and older buildings converted to new uses often have ventilation added later.
What to look for in a quote
- Whether the figure could change on the day
- What records you’ll receive afterwards
- Proof of insurance
- How areas they can’t reach will be recorded
Aftercare tips
Here’s the after-treatment advice, in brief:
- Report leaks or condensation near ductwork quickly
- Warn anyone working in ceiling voids about the dampers
- Keep to at least yearly testing
- Make sure access panels stay clear and usable
The next test should be no more than a year away. BESA guidance is at least annual testing, so it helps to book it before the date slips.
Make sure every damper can be reached. If a damper has no access panel, have one fitted before the next test.
Managing agents and facilities teams in Bagmore
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept on a regular cycle.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
How the job changes from site to site
Schools, hospitals and care homes
Hospitals and care homes stay occupied around the clock. The sequence of testing is agreed with staff so care isn’t interrupted.
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We plan that with you before the visit.
How it works
Night work is normal for us. A lot of visits happen overnight or at weekends, so a kitchen or building can carry on as usual the next day. On site, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. The timing of a visit to Bagmore is set by you, and the travel is our side of the planning.
- Before the visit, we agree access, timings and any areas with restrictions.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Before we arrive
- Move anything stored near the system
- Make sure equipment near the work can be switched off and left to cool
- Arrange a key holder or contact on site
How to get a quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To start, phone us on 0345 646 2711 or email us.
Advice
What else we do in Bagmore
Staff cleaning versus specialist work
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Common questions in Bagmore
Which fire service covers Bagmore?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Bagmore. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Can the work in Bagmore be done at night or at weekends?
Yes, nights and weekends are routine for us. That way a site in Bagmore doesn’t have to lose a day’s trading. Let us know the hours you are closed and we’ll book within them.
Which accreditations do you hold?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We have been trading since 2009 and we are fully insured.
Can you fix fire dampers that fail?
Failed dampers are reported and we can quote to repair or replace them. Once fixed, the damper is drop tested again and the record updated.
Whose job is it to make sure fire dampers are tested?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
What should I send you?
The site address, the type of premises and your opening hours, plus pictures of the system and your last certificate or report if you have one.
How do you deal with dampers that can’t be reached?
Any damper we can’t reach is listed on the report so nothing is quietly missed. Fitting an access panel is the usual fix, and we can quote for it.
Do you survey before quoting?
Yes. For many sites, photos and a few details are enough, while bigger or harder-to-see systems are surveyed on site.
Bagmore buildings and fire safety
Bagmore sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. At about 46 miles from central London, Bagmore sits well inside the area we cover. A survey and a fixed quote come first, then the visit at a time that suits you.
If you manage a care home or clinic near Bagmore, the testing that a hospital like Alton Community Hospital (about 4.9 miles south-east) relies on applies to your dampers too.
Bagmore is about 5 miles north-west of Alton, in Hampshire. We carry out fire damper testing for businesses, landlords and public buildings in Bagmore and the rest of Hampshire. Bagmore is one of 683 places in Hampshire where we work for commercial clients. Reading is in our area too, about 18 miles from Bagmore.
Work in RG25 is surveyed, quoted and booked the same way as anywhere else. Nearby, we also carry out fire damper testing in Southrope (1 mile east), Burkham (1 mile south-west), Shalden Green (2 miles east), Bradley (3 miles south-west) and Bentworth (3 miles south). We also work in nearby towns such as Basingstoke (5 miles north-west), Winchester (15 miles south-west), Farnborough (14 miles north-east), Fleet (11 miles north-east), Aldershot (13 miles east) and Alton (5 miles south-east).
Landmarks near Bagmore
For rail, the closest station is Alton station, roughly 4.9 miles south-east of the centre. Other landmarks nearby include Alton Community Hospital (4.9 miles south-east) and Gliding Heritage Centre (1.6 miles south-east). For a walk, there’s Farleigh Hill.