Hampshire · Fire damper testing
Burkham fire damper testing
We cover Burkham for fire damper testing. Fixed quotes, work around your opening hours and photo reports on every job.
- Dampers flagged on a fire risk assessment
- Gaps in the fire damper test log
- Fire dampers with no recent test record
About our fire damper testing in Burkham
The point of testing is to find dampers that fail. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. Common call-outs are for dirty dampers that may not close and dampers that can’t be reached without an access panel, on wall and floor dampers, motorised smoke dampers and offices and schools.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test typically starts with finding them all.
A written report with photos follows each visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Burkham (GU34)
- Wider area
- Hampshire
- Reporting
- Written report with pictures
- Quotes
- A fixed price before we start
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Common problems we fix in Burkham
Over the life of a building, owners, tenants and contractors come and go, and the damper records don’t always go with them. Without a register, nobody knows how many dampers there are or when they were last tested.
If you notice any of these, it’s worth a diagnosis:
- Fire dampers with no recent test record
- Smoke dampers that need testing through their controls
- Dampers hidden with no access panel or hatch
- Dirty dampers that may not close
If you manage a care home or clinic near Burkham, the testing that a hospital like Alton Community Hospital (about 4.4 miles south-east) relies on applies to your dampers too.
What your quote should include
- What records you’ll receive afterwards
- Whether the quote is based on a survey or pictures
- If the quote is a fixed price or an estimate
- How they set the interval to the next visit
How the visit works
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with photos. The middle part takes longest, which takes a morning or an afternoon for a small number of dampers, longer where there are many. Somewhere like Burkham, lanes, gates and parking are worth mentioning in advance.
- First we check the schedule and the last set of results.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Preparing for the visit
- Have your last certificate or report to hand
- Arrange a key holder or contact on site
- Make sure equipment near the work can be switched off and left to cool
Ask for a quote
To help us quote: where the site is, what it is and its opening hours, photos of the system and any previous report or certificate. Once you have those, ring 0345 646 2711, or email photos.
Advice
What happens if it’s left?
Sites in Burkham tested every year build up a history for each damper so repeat problems show up early. A damper that was slow last year and sticks this year tells you something before it becomes a failure. In a place like Burkham, ductwork and fans are easy to forget until something goes wrong.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why Burkham businesses choose us
- Photo reports with every job
- Survey first, then a fixed quote
- Fixed quotes from a survey or photos
- Ventilation hygiene specialists since 2009
Read how cleaning jobs are priced and how to check a contractor.
More services for Burkham
What your team can do, and what needs us
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
FAQs for Burkham
Which fire service covers Burkham?
That is Hampshire and Isle of Wight Fire and Rescue Service. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Do you work in villages like Burkham?
Yes, we work in villages as well as towns, and Burkham is covered. Let us know about access, parking and anything unusual about getting there when you book.
How often does BESA say fire dampers should be tested?
At least once a year, under BESA guidance, plus a test when the damper is first installed. Some sites choose to test more often where the risk is higher.
Can testing be done without disrupting the building?
Yes, we plan around how the building is used. We can work evenings, overnight or at weekends if daytime testing would get in the way.
Can one contract cover all our sites?
Yes. Send the list of sites and the work at each and we’ll quote them together.
Do you carry out smoke damper testing?
Yes. We test smoke dampers through their control system, as they’re motor driven. Each one is checked for full travel and the result recorded.
Can you quote from pictures?
In many cases, yes. With good photos, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
Who is the responsible person?
It depends on the building. The Fire Safety Order 2005 puts the duty on the responsible person, which can be the employer, the owner, a landlord, an FM or a managing agent.
Fire damper testing around Burkham
Burkham, about 47 miles from central London, is within our usual area. We work evenings, overnight and at weekends, so the visit fits around the site. Fire safety in Burkham falls to Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
If you manage an older building converted to a hotel or venue, like many historic houses in the area (Hall Place is about 1.9 miles south), finding every damper is the first job.
Burkham is about 4 miles north-west of Alton, in Hampshire. Wherever you are in the GU34 postcode area, we cover fire damper testing for commercial sites. Across Hampshire, we cover 683 places, Burkham among them. Our Reading page covers sites nearby (19 miles or so).
Postcode districts we cover here for fire damper testing: GU34. We also cover the places around Burkham: Bagmore (1 mile north-east), Bradley (1 mile south-west), Southrope (2 miles north-east), Bentworth (2 miles south) and Holt End (2 miles south). We also work in nearby towns such as Basingstoke (6 miles north), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles east) and Alton (4 miles south-east).
What’s near Burkham
Burkham’s nearest station is Alton station, roughly 4.7 miles south-east. Other landmarks nearby include Barton Castle (3.7 miles south-west) and Alton Community Hospital (4.4 miles south-east). Open spaces near Burkham include Farleigh Hill.
What fire damper testing cannot fix
Fire damper testing can’t fix everything, and we will tell you before we start. It won’t put right:
- Fire risk assessments, which need a fire risk assessor
- Faults in the alarm or building controls that signal smoke dampers
- Holes around ductwork in fire-resisting walls
If you are not sure, just ring 0345 646 2711 or send us an email and we’ll give you a straight answer.
Where we work
- Wall and floor dampers
- Offices and schools
- Motorised smoke dampers
- Riser dampers
- Hospitals and care homes
- Fusible link fire dampers
Part by part
Offices and retail
In shared buildings, some dampers sit inside tenants’ space. We agree access with the managing agent before the visit.
Smoke dampers
Smoke dampers are motorised and run by a control system. Testing means operating them from the controls and check each blade travels fully.
How we price fire damper testing
There’s no set price list, because no two systems are the same. What we look at:
- A single visit or a regular plan
- Parking and loading at the site
- How many systems or sites are involved
- Working hours and out-of-hours timing
The cost depends on the size of the system, the condition it’s in and access to every part of it. We give you a fixed price before we start, so you know where you stand.
Asking for a quote
When you contact us, it’s useful to have:
- Where the site is and what kind of site it is
- Photos showing the whole system and its surroundings
- Your last certificate, test record or report
- The times we could work without disrupting the site
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.