Greater London · Extract fan repair and replacement
Picketts Lock extract fan repair
Looking for extract fan repair in Picketts Lock? We survey first, send you a fixed quote and work around your opening hours, finishing with a written report and photos.
- A belt-driven fan that squeals
- A motor that trips out or overheats
- A knocking noise from the extract fan
The process
When we arrive, we check the system against the survey or the photos you sent. Anything unexpected is raised with you before we go further. After that, the work takes anything from an hour or two to a full visit, depending on the fault. If your building in Picketts Lock has sign-in rules, permits or key holders, mention them when you book.
- A visit is booked, in the evening or overnight if that suits.
- The extract is switched off and the fan opened up.
- We inspect every moving part and the fixings.
- We explain the options and quote a fixed price.
- The fan is repaired or replaced, then checked running.
How to prepare
- Let us know when the site is closed or quiet
- Mention any sign-in, permit or induction we need
- Clear the space around the work
Getting a quote
To help us quote: where the site is, what it is and its opening hours, pictures of the system and any previous report or certificate. Once you have those, ring 0345 646 2711 or email us.
Read more
Extract fan repair in Picketts Lock
Across Picketts Lock, we deal with fan faults of every kind, from rattling and humming to a fan that has stopped dead. The fault is diagnosed, quoted at a fixed price and put right or fit a replacement when it’s beyond repair. If you’re dealing with an extract fan that has stopped working and a whining or grinding extract motor, we can put it right, from bearings, fan motors and roof and wall fans onwards.
For a London kitchen, a failed extract fan normally means the cooking stops. Fans in Picketts Lock are often on a roof or in a basement at the end of a long duct run, so we ask about access first.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Picketts Lock (N9, E4, N18)
- Region
- Greater London
- Reporting
- Report and photos after the visit
- Quote
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Different parts, different methods
Direct-drive fans
Direct-drive fans have the impeller mounted straight on the motor. There are no belts, so faults tend to be in the motor, bearings or impeller.
Impellers and housings
The fan housing collects grease too. Both are inspected and cleaning may be part of the fix.
Extract fans in Picketts Lock
Food Standards Agency records list about 158 cafés, restaurants and staff canteens and about 79 takeaways and sandwich shops in Picketts Lock and the streets around it, up to about 1.5 miles out. For any of them with a canopy, the extract fan is what keeps the kitchen usable. London extract fans are often at the end of long duct runs, on roofs or in basements. Food hygiene inspections in Picketts Lock are the job of Enfield council’s environmental health team. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. That’s one more reason not to keep cooking with a broken fan.
If you look after a church or hall kitchen near All Saints' Church, or anywhere in Picketts Lock, test the extract fan before a big event rather than on the day.
Picketts Lock is about 1 mile west of Chingford, in Greater London. From the centre of Picketts Lock to the outskirts, we cover extract fan repair for every kind of premises, from a single unit to a large public building. Picketts Lock is one of 764 towns, villages and districts in Greater London we cover for extract fan repair. Our London page covers sites nearby (9 miles or so).
Work in N9, E4 and N18 is surveyed, quoted and booked the same way as anywhere else. Extract fan repair is available to premises on Ardra Road, Goodwin Road and Hennessy Road and the roads around them. Picketts Lock is on the A1037, which makes it straightforward for our technicians to reach for extract fan repair. We also cover the places around Picketts Lock: Chingford Mount (1 mile south-east), South Chingford (1 mile south), Chingford (1 mile east), Edmonton (1 mile west) and Ponders End (1 mile north-west). Within a short drive, we also cover London (9 miles south), City of Westminster (9 miles south-west), Marylebone (9 miles south-west), Kensington (11 miles south-west), St Pancras (8 miles south-west) and Shoreditch (7 miles south).
Around Picketts Lock
In Picketts Lock, that means kitchens and buildings near The King's Ford pub, Nightingale Academy and Pymmes Park. For rail, the closest station is Ponders End station, about 1.2 miles north. Well-known places in the area include North Middlesex University Hospital (2 miles south-west) and The Epping Forest Museum (2.2 miles east). The countryside around Picketts Lock includes Pole Hill and Highams Park Lake.
Common questions in Picketts Lock
Can you come out to a failed extract fan in Picketts Lock out of hours?
We run a 24/7 emergency line for failed extract fans, and Picketts Lock is part of our area. Phone 0345 646 2711 and we’ll talk through the fault and access. Let us know whether the fan is silent, noisy or tripping the power.
Can you work in Picketts Lock outside opening hours?
Yes. We work evenings, overnight and at weekends. The work in Picketts Lock can fit around your hours. When you phone us on 0345 646 2711 or email us, mention when the site is quiet.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’ve been trading since 2009 and we are fully insured.
What do you do to protect the area?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
Are you insured?
Yes. We’re fully insured, and the details are available on request.
Can you supply and fit a replacement fan?
Yes, when repair does not make sense. We check the duct size and the extract the kitchen needs so we confirm that first.
Does a faulty extract fan always need replacing?
Repair is always our starting point. If the fan is past saving, a replacement may be more sensible, and we’ll explain why.
Is it worth cleaning the extract while you’re fixing the fan?
Repairing the fan does not clean the canopy or ducts. If there’s grease on the fan, a full TR19® clean is worth booking, and we can arrange both.
Managing agents and facilities teams in Picketts Lock
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Each site gets its own report and pictures, so records stay tidy.
Signs you need extract fan repair in Picketts Lock
Grease that gets past the filters ends up on the fan. It builds up on the impeller blades unevenly, and an unbalanced impeller shakes and starts to vibrate and rattle.
Any of these means the system needs a check-up:
- An extract fan that rattles or knocks
- Vibration spreading from the fan into the ducts
- A squealing belt on start-up
- A fan running too slowly to clear the kitchen
If you manage a school such as Delta Primary School and the kitchen fan is getting louder, the next break is the time to deal with it.
What your quote should include
- Whether VAT is included
- What happens if part of the system cannot be accessed
- Whether the work can be done while the site is closed
- If the quote is a fixed price or an estimate
What extract fan repair cannot fix
Extract fan repair cannot fix everything, and we will tell you before any work starts. It will not put right:
- Cooking smells reaching neighbours, which may need odour control
- Grease throughout the ductwork, which needs a full TR19 clean
- Gas interlock faults that a Gas Safe registered engineer must deal with
If you are not sure, just give us a ring on 0345 646 2711 or use the quote form and we’ll give you a straight answer before you book.
What the work covers
- Belts and pulleys
- Kitchen extract fans
- Fan motors
- Bearings
- Roof and wall fans
- Fan housings
Places near Picketts Lock
What else we do in Picketts Lock
What staff can safely do
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, next to our reports.
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
Keeping the system healthy
So the system stays in good health:
- Do not cook with gaps in the filter bank
- Keep the emergency number where staff can see it
- Book regular TR19 cleaning, which includes the fan
- Make sure the isolator and controls are easy to reach
Grease on the fan normally means grease in the duct as well. A full TR19® clean deals with the canopy, ductwork and fan together, with a certificate and photo report.
When filters block, the fan works harder. Changing or cleaning them on time takes load off the motor and helps prevent overheating.