Greater London · Extract fan repair and replacement
Extract fan repair and replacement in Edmonton, Greater London
Extract fan repair and replacement for Edmonton, with a survey first and a report with pictures at the end. Call for a fixed quote.
- A fan that keeps cutting out
- Weak extraction and a smoky kitchen
- An extract fan that rattles or knocks
Between visits
Good habits slow the build-up between visits. A few tips:
- Write down when the fan misbehaves
- Make sure staff know who to call if the fan fails
- Never run the extract with filters missing
- Do not wait for a noisy fan to stop
We run the fan and check it’s steady before we go. We explain the fault and the fix along with anything else that needs watching.
The fan is part of every full TR19 clean. Keeping grease off the impeller is one of the simplest ways to protect it and that means less wear.
How we handle extract fan repair in Edmonton
The extract fan is what pulls smoke, heat and steam out of the kitchen. When it starts to rattle, hum or slow down, the cooking area soon fills with heat and fumes. Our engineers track down the fault and fix it, by repairing the fan or replacing it. The work covers bearings, belts and pulleys and fan motors, and the jobs we see most are an extract fan that rattles or knocks and a fan that whines, hums or grinds.
London extract fans often sit on rooftops, exposed to the weather as well as the grease, and bearings, belts and motors wear out in the end. A fan that’s noisy or vibrating is giving a warning.
Duct Doctor has been trading since 2009, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we carry full insurance.
- Location
- Edmonton (N9, N18, N13, EN1)
- Wider area
- Greater London
- Reporting
- Report and photos after the visit
- Price
- A fixed price before any work starts
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What your team can do, and what needs us
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that won’t come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Common questions in Edmonton
Does London parking affect a job in Edmonton?
London parking can be tight, so details of loading bays and permits help. Working overnight, as we often do in London, typically makes it simpler.
Do you work overnight in Edmonton?
Yes, nights and weekends are routine for us. The work in Edmonton can fit around your hours. Just phone us on 0345 646 2711, or send details by email with your opening times and we’ll plan around them.
Who is responsible for fire safety on the premises?
The Fire Safety Order 2005 calls them the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
Will I get paperwork for my records?
Yes, always. It’s a dated, written report with pictures, and TR19® Grease cleans come with a certificate through the BESCA VHE portal. File it with your fire safety records.
How do you keep the site clean during the work?
With sheeting and covers, before anything else happens. We keep the work contained and leave the area clean.
How long will the fan be out of action?
Typically, a fan repair takes a few hours on site, depending on the fault and the access to the fan. Where parts need ordering, we’ll explain the timescale.
What paperwork should we keep on file?
Anything that proves the system is maintained: reports, certificates, photos and your own cleaning or check logs. One maintenance log per site keeps it simple.
Do you survey before quoting?
Yes, always. Diagnosis comes before treatment: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Honest limits
An honest diagnosis matters more to us than a booking, so here’s what this work cannot put right:
- A system that needs redesigning rather than repairing
- Smells from the discharge that need odour control equipment
- Grease build-up in the rest of the extract system
Not sure which it is? You can give us a ring on 0345 646 2711 or email us and we will tell you honestly.
What we work on in Edmonton
- Bearings
- Belts and pulleys
- Roof and wall fans
- Fan housings
- Kitchen extract fans
- Fan motors
When to call us in Edmonton
Fan bearings do not last for ever, especially in a hot, greasy airstream. Worn bearings whine, rumble or grind, and if they’re left they can seize.
These are the problems we see most often:
- A squealing belt on start-up
- An extract that vibrates through the ductwork
- An extract fan that rattles or knocks
- A failed fan that needs a replacement
Occasional-use kitchens, such as a hall kitchen near All Saints' Church or elsewhere in Edmonton, are where a stiff or seized fan can turn up.
Comparing quotes
- Proof of accreditation you can verify
- How areas they cannot reach will be recorded
- If the quote is a fixed price or an estimate
- Whether the whole system is included, or only the parts that are easy to reach
Extract fans in Edmonton
Food Standards Agency records list about 186 restaurants, cafés and canteens and about 111 sandwich bars and takeaways in and around Edmonton, up to about a mile and a half out. Wherever they cook under a canopy, a failed extract fan stops the kitchen. Kitchens in Edmonton get their food hygiene inspections from Enfield council. Under food hygiene rules, a kitchen needs suitable and sufficient ventilation. Getting the fan running again is the priority. London extract fans are often at the end of long duct runs, on roofs or in basements.
For kitchens close to Edmonton Green station, a fan that stops mid-service needs fixing fast, and our emergency line runs 24/7. If you run a school kitchen, at a school such as Brettenham Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term.
Edmonton is about 9 miles north-east of City of Westminster, in Greater London. Sites in Edmonton get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our Greater London coverage runs to 764 places, Edmonton among them. Our London page covers sites nearby, about 9 miles away.
All of N9, N18, N13 and EN1 is within our area for extract fan repair, from the main roads to the quietest streets. If you need extract fan repair at premises on The Broadway, Plevna Road and Galahad Road or a nearby road, our technicians can take on the work. Edmonton sits on or near the B137 and B154, so getting to you is simple for evening and night visits. Nearby, we also carry out extract fan repair in Upper Edmonton (1 mile south), Picketts Lock (1 mile east), Northumberland Park (1 mile south), Ponders End (1 mile north-east) and Bush Hill Park (1 mile north-west). Further out, we also cover London (9 miles south), City of Westminster (9 miles south-west), Marylebone (8 miles south-west), Kensington (10 miles south-west), St Pancras (7 miles south) and Shoreditch (7 miles south).
Near you in Edmonton
We work in commercial kitchens and buildings around NiW Furniture pub, The Latymer School and Starks Field School, among other places. There’s a railway station in Edmonton itself: Edmonton Green station. Well-known places in the area include Edmonton Green Shopping Centre (within half a mile north-east) and North Middlesex University Hospital (1 mile south-west). Green spaces nearby include Highams Park Lake and Ainslie Wood.
What we do, step by step
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, while signing off means the written report and photos. Most of the time goes on the work itself, and that takes a few hours on site, depending on the fault and the access to the fan. Before any visit in Edmonton, we agree where the van can stop and how equipment reaches the system.
- We agree a time to attend, out of hours if needed.
- The extract is switched off and the fan opened up.
- We inspect every moving part and the fixings.
- We explain the options and quote a fixed price.
- We complete the work and check the fan runs smoothly.
Before we arrive
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Allow time for equipment near the work to be turned off and cool down
- Dig out any earlier paperwork for the system
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Advice
Nearby places to Edmonton
Other services in Edmonton
Different parts, different methods
Motors and bearings
Motors and bearings take the most strain in a kitchen extract fan. Heat, grease and long running hours all wear them.
Fan controls
Where the fault is in the building’s electrical supply, an electrician is needed. If that is the cause, we’ll say so and explain what we found.
Multi-site and managed buildings
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side, and the report can go to both.
We also work for facilities teams across offices, schools and healthcare across Greater London. Larger estates can be phased building by building around the people who use them.