Kent · Extract fan repair and replacement
Extract fan repair and replacement in Margate, Kent
One call covers repair and replacement of kitchen extract fans, fan motors and worn fan parts in Margate, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- A fan running too slowly to clear the kitchen
- A belt-driven fan that squeals
- Vibration spreading from the fan into the ducts
Extract fan repair in Margate, done properly
Everything a kitchen extract does depends on the fan. Once it turns noisy, sluggish or stops altogether, the kitchen gets hot and smoky very quickly. Our engineers track down the fault and fix it with a repair or a replacement. Typical jobs include an old fan that needs replacing and an extract fan that rattles or knocks, across bearings, roof and wall fans and fan motors.
A noisy fan, weak extraction or a kitchen that gets hot and smoky are the usual warning signs. In Margate, as anywhere, a repair before the fan stops is far less disruptive than an emergency.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we carry full insurance.
FAQs for Margate
Can the work in Margate be done at night or at weekends?
Yes, evening, overnight and weekend work is normal for us. That way a site in Margate does not have to lose a day’s trading. When you give us a ring on 0345 646 2711 or use the quote form, mention when the site is quiet.
Which council inspects kitchens in Margate?
Kitchens in Margate are inspected by Thanet council’s environmental health officers. An officer may ask how the kitchen is ventilated, so keep repair records with your maintenance file.
Will I get paperwork for my records?
Yes. It’s the record insurers and inspectors ask to see: a dated report with pictures, listing the work and any areas we couldn’t reach.
Can you repair a fan rather than replace it?
We look at repairing it first. If the fan is past saving, a replacement may be more sensible and we will tell you the reasons.
What happens to the waste?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We do not leave it behind.
How do you protect the area?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
Can you come out in an emergency?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we will talk you through the next steps.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Every site has its own report.
Staff cleaning versus specialist work
Staff cleaning and specialist work aren’t the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
How we price extract fan repair
Some jobs are bigger than they look, and some smaller. The main factors:
- The size of the system
- Site rules, permits and inductions
- Parking and loading at the site
- The condition of the system
The cost depends on the size of the system, what state it’s in and access to every part of it. You get a fixed price before any work starts, so you know where you stand.
Helping us quote
There’s no need for technical detail. It helps if you can send:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The paperwork from the last visit, if you have it
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Any access panels or hatches you can see
Want a quote for extract fan repair? Please call 0345 646 2711 or use the quote form and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Landlords, agents and facilities managers
We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.
What happens if it’s left?
A fan that is running slowly isn’t clearing the kitchen properly. Staff work in hotter, steamier air and grease has more chance to settle on surfaces and in the duct. An inspector or insurer will want to see recent records, so it makes sense to have them ready.
Putting the work off seldom saves money. Problems in a system tend to grow, which can make the next visit longer. If you are unsure, ring 0345 646 2711, or send details by email and we’ll give you an honest view and a fixed quote.
Why us?
- Trading since 2009
- CHAS, SafeContractor and ISO 9001
- Fixed quotes, typically within one working day
- A single point of contact for sites across the South East and London
Take a look at what affects the cost and our accreditations.
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. After that, the work takes anything from an hour or two to a full visit, depending on the fault. Work in Margate is normally booked after closing, early in the morning or on a closed day.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- The fan is isolated and opened up so we can see inside.
- We check the motor, bearings, drive, impeller and mountings.
- You hear what’s wrong and what it will cost, with a fixed quote, before we go ahead.
- The repair or replacement is carried out and the fan is run and checked.
Getting ready for the visit
- Let us know about parking and loading
- Let us know about permits to work or site inductions
- Name a contact who can let us in at the agreed time
How to get a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
Read more
Extract fan repair around Margate
At about 1 mile from the coast, Margate is close enough for sea air to matter. A fan exposed to sea air needs its fixings and housing checked more often than one inland. Food Standards Agency data counts about 178 restaurants, cafés and works canteens and about 60 sandwich bars and takeaways in and around Margate, up to about a mile and a half out. Wherever they cook under a canopy, a failed extract fan stops the kitchen. In Margate, food businesses are inspected by environmental health officers from Thanet council. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. So a failed fan is worth fixing before the next service, not the next month.
If you look after a church or hall kitchen near Parish Church of St John the Baptist, or anywhere in Margate, test the extract fan before a big event rather than on the day. For kitchens close to Margate station, a fan that stops mid-service needs fixing fast, and our emergency line runs 24/7.
Margate is in Kent. From the centre of Margate to the outskirts, we cover extract fan repair for every kind of premises, from a single unit to a large public building. Across Kent, we cover 922 places, Margate among them. Maidstone is in our area too, about 38 miles from Margate.
We work across the CT9, CT7, CT8 and CT10 postcode area for extract fan repair and the roads nearby. Whether your site is on Yoakley Square, Church Road and High Street or anywhere close by, we can help. You’ll find Margate on the A28 and A254, which makes it straightforward for our technicians to reach for extract fan repair. We also cover the places around Margate: Westwood (1 mile south), Westbrook (1 mile west), Garlinge (1 mile west), Flete (1 mile south-west) and Haine (2 miles south). Within a short drive, we also cover Canterbury (15 miles south-west), Ramsgate (3 miles south), Whitstable (15 miles west), Deal (11 miles south), Herne Bay (11 miles west) and Walmer (12 miles south). Margate is among the bigger places we cover in Kent for extract fan repair.
Local landmarks in Margate
Locally, jobs take us to businesses close to Hartsdown Academy and Secret Spices pub, among other places. Margate’s nearest station is Margate station, about 0.6 miles north-west. Well-known places in the area include Westwood Cross (1.6 miles south) and Queen Elizabeth the Queen Mother Hospital (less than half a mile south-east). Not far away are Sandwich and Pegwell Bay.
When to call us in Margate
Any kitchen that cooks for long hours works its fan hard, in Margate or anywhere else. Belts on a belt-driven fan stretch and wear and a slipping belt means slower fan speed and weaker extraction.
The symptoms we’re asked about most include:
- A dead fan motor
- Weak extraction and a smoky kitchen
- A belt-driven fan that squeals
- An old fan that needs replacing
If you run a school kitchen, at a school such as Salmestone Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term.
What your quote should include
- Whether the figure could change on the day
- Proof of accreditation you can verify
- Whether the quote is based on a survey or photos
- Proof of insurance
Aftercare tips
Results last longer with the right care. We suggest:
- Clean or change filters on schedule
- Book regular TR19 cleaning, which includes the fan
- Keep all filters fitted while cooking
- Do not turn the fan down to hide a noise
Your kitchen can get back to normal as soon as the fan is running. We leave the area tidy and explain anything you need to know.
Clogged filters make the fan strain. Keeping filters clean eases the strain and protects the motor.