Kent · Extract fan repair and replacement
Flete extract fan repair
Extract fan repair across Flete and nearby, timed so the site keeps working and finished with a written report and photos.
- A whining or grinding extract motor
- A squealing belt on start-up
- An extract that vibrates through the ductwork
Signs you need extract fan repair in Flete
Fixings and anti-vibration mounts work loose or perish over time. The fan’s movement then travels into the ductwork and structure and that is a common source of rattles.
Any of these means the system needs a check-up:
- A fan shaking on its mountings
- A fan rattling in its housing
- A fan running too slowly to clear the kitchen
- A failed fan that needs a replacement
If you look after a church or hall kitchen near St. Catherine's Church, or anywhere in Flete, test the extract fan before a big event rather than on the day.
Questions to ask before you book
- Whether the whole system is included, or only the parts that are easy to reach
- Whether they’re fully insured
- Which accreditations they hold, and whether you can check them
- What hours they’ll be on site
How we handle extract fan repair in Flete
Everything a kitchen extract does depends on the fan. When it starts to rattle, hum or slow down, the kitchen gets hot and smoky very quickly. Our engineers track down the fault and fix it, by repairing the fan or replacing it. The work covers fan motors, kitchen extract fans and roof and wall fans, and the jobs we see most are a fan that whines, hums or grinds and a knocking noise from the extract fan.
In a village or hamlet like Flete, the kitchens with extract fans are few, wherever there are any. When one fails, the cooking stops, and emergency callout is available 24/7, villages included.
Each visit ends with a written report and pictures, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Flete (CT9)
- Wider area
- Kent
- Reporting
- Report and pictures after the visit
- Quotes
- Fixed quote, usually within a working day
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Leave it or put it right?
Some kitchens run a noisy fan on a lower speed to cut the noise. It hides the symptom and weakens the extract, and the fault carries on developing. A proper diagnosis in Flete gets to the real cause. In a place like Flete, ductwork and fans are easy to forget until something goes wrong.
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
Why Flete businesses choose us
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- CHAS, SafeContractor and ISO 9001
- Work around your opening hours, with 24/7 emergency cover
- One contact for all your sites in London and the South East
Take a look at how cleaning jobs are priced or our accreditations.
What extract fan repair can’t fix
Some problems need a different service or another trade:
- Smells from the discharge that need odour control equipment
- Faults in the building’s electrical supply, which need an electrician
- An extract system that was undersized from the start
Not sure which it is? You can phone us on 0345 646 2711, or email photos and we will tell you honestly.
Where we work
- Fan motors
- Belts and pulleys
- Roof and wall fans
- Kitchen extract fans
- Fan housings
- Bearings
What else we do in Flete
Looking after it afterwards
Aftercare is simple, and it makes the next visit easier:
- Report new noises from the fan early
- Keep the area around the fan controls clear
- Keep the grease filters clean and fitted
- Make sure staff know who to call if the fan fails
Before we leave, the fan is run and checked. You’ll hear what we found and what we did, and anything else we noticed is pointed out.
Clogged filters make the fan strain. Keeping filters clean eases the strain and helps prevent overheating.
Extract fan repair in Flete: local notes
Sea air reaches Flete, which sits within about 2 miles of the coast. Rust and grease together wear a fan out sooner, and coastal air speeds up the rust. There are about 50 cafés, restaurants and staff canteens and about 17 takeaways within about 1.5 miles of central Flete, according to the Food Standards Agency’s register. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. It’s Thanet council that sends environmental health officers to food businesses in Flete. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. So a failed fan is worth fixing before the next service, not the next month.
For school kitchens, at schools like St Gregory's Catholic Primary School for example, a planned fan repair in the holidays avoids losing lunches in term time.
Flete is about 1 mile south-west of Margate, in Kent. Whether your site is in the middle of Flete or further out, we cover extract fan repair for every kind of premises, from a single unit to a large public building. 922 places in Kent are on our list, from busy centres to quieter spots. For sites nearby, see our Maidstone page (37 miles or so).
Our technicians cover all of CT9 for extract fan repair and the streets around it. Local streets include Victoria Road, Flete Road and Norfolk Road, all of which we cover for extract fan repair. Nearby, we also carry out extract fan repair in Westwood (1 mile east), Haine (1 mile south-east), Manston (1 mile south), Garlinge (1 mile north-west) and Margate (1 mile north-east). Further out, we also cover Canterbury (14 miles south-west), Broadstairs (3 miles east), Whitstable (15 miles west), Deal (10 miles south), Herne Bay (10 miles west) and Walmer (11 miles south).
Around Flete
Around Flete, our work takes us to kitchens and buildings near Hartsdown Academy. Flete’s nearest station is Margate station, about 1.5 miles north. Nearby you will also find Queen Elizabeth the Queen Mother Hospital (1.3 miles north-east) and Westwood Cross (1.1 miles east). For a walk, there’s Sandwich and Pegwell Bay.
How we price extract fan repair
We quote each job individually. This is what makes a difference:
- The times the site is available
- Any permits to work or inductions
- A single visit or a regular plan
- Parking and loading at the site
The price reflects the work, not guesswork. That is why we survey first, from pictures or on site, and the price is agreed before any work starts.
Asking for a quote
To speed up the quote, send us:
- The paperwork from the last visit, if you have it
- How we’d reach plant on a roof or in a plant room
- Wide photos of the system and the area around it
- Close-ups of filters, grilles, hatches or access panels
Getting a quote does not take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
The process
Night work is normal for us. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes anything from an hour or two to a full visit, depending on the fault. Rural roads and tight entrances are worth telling us about before a visit to Flete.
- You describe the fault and we arrange a visit.
- We isolate the fan before touching it.
- We diagnose the fault, checking the controls as well as the fan.
- You get a fixed price for putting it right.
- We fix the fault and run the fan to check it.
Getting ready for the visit
- Mention any parking or loading restrictions
- Clear loose items from the work area
- Let us know when the site is closed or quiet
Ask for a quote
Need a price for extract fan repair? Please call 0345 646 2711 or send us an email and tell us about the site. We will explain what we’d do and send a fixed quote before anything is booked.
Related advice
Part by part
Belt-driven fans
In a belt-driven fan, the motor drives the impeller by belt. Belts wear, stretch and slip, and pulleys and bearings need checking too.
Impellers and housings
Grease settles inside the fan housing as well as on the blades. We check both and cleaning may be part of the fix.
Common questions in Flete
Do you work overnight in Flete?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Let us know the hours you are closed and we will book within them.
Can sea air affect extract fan repair in Flete?
Yes, to a degree: at about 2 miles from the coast, Flete gets salt-laden air that corrodes metal faster. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
What is TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t law, but it’s the benchmark.
What types of premises do you cover?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.
Which records should we keep?
Everything that shows the system is looked after: our reports and pictures, any certificates and your in-house logs. A single log for each site works best.
Do we lose a day’s trading?
Not usually. The area we’re working in has to be out of use while we’re there, so we book a time when it would be closed anyway.
Do you cover Flete?
Yes. Our technicians work in Flete, within the South East and London area we cover.
Do you recommend a next date?
Yes. Every report includes a recommended date for the next visit, based on what we found and how the system is used.