Hampshire · Extract fan repair and replacement
Extract fan repair and replacement in Isington, Hampshire
Extract fan repair for Isington, with a survey first and a report with pictures at the end. Call for a fixed quote.
- A fan running too slowly to clear the kitchen
- A worn or slipping fan belt
- An overheating extract motor
About our extract fan repair in Isington
Diagnosis comes before parts. We look at the motor, the belts or direct drive, the impeller and the mountings, along with the fan’s controls. Then you’re given a fixed quote for the repair or the replacement. The work covers bearings, fan motors and fan housings, and common reasons people get in touch are a fan shaking on its mountings and a whining or grinding extract motor.
Somewhere as small as Isington, a kitchen extract fan might serve a pub, a school, a care home or a hall kitchen. A failed fan stops the kitchen, and emergency callout is available 24/7, villages included.
Each visit ends with a written report and pictures, so there’s a dated record of the work. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Isington (GU34)
- Wider area
- Hampshire
- Paperwork
- Written report with pictures
- Quote
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Why it’s worth doing now in Isington
A fan that is running slowly is not clearing the kitchen properly. The kitchen becomes an uncomfortable place to work and grease has more chance to settle on surfaces and in the duct. It’s worth booking a check, because nobody sees inside a duct day to day.
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
Why choose Duct Doctor in Isington
- Trading since 2009
- Photo reports with every job
- Fully insured
- One number for every site across the South East and London
Read how cleaning jobs are priced and how to check a contractor.
Do you need extract fan repair in Isington?
Not every problem is mechanical. Speed controllers, isolators and wiring can all fail, and a fan that will not start isn’t always a dead motor.
Any of these means the system needs a check-up:
- A fan shaking on its mountings
- A failed fan that needs a replacement
- A fan that keeps cutting out
- A dead fan motor
School kitchens can’t easily serve lunch without extraction, so if you look after one at a school like Binsted Church of England Primary School, fix a failing fan before term starts.
Before booking anyone
- Whether they recommend a next date
- What records you will receive afterwards
- Whether inaccessible sections are listed on the report
- If they look at the system before pricing
Keeping the system healthy
Looking after the system between visits is straightforward, and it helps at the next visit:
- Make sure staff know who to call if the fan fails
- Note when the fan trips or cuts out
- Do not wait for a noisy fan to stop
- Make sure the fan is cleaned with the rest of the system
Clean filters help a repaired fan stay that way. Less grease on the impeller means less wear and the quieter it runs.
A 3, 6 or 12-monthly cleaning plan brings us back at set intervals, so the fan is looked at as part of each visit and problems are spotted sooner.
Extract fan repair around Isington
Environmental health officers from East Hampshire council inspect food businesses in Isington. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. A kitchen without a working fan has a problem to fix quickly. About 41 miles out from central London, Isington is part of the South East area we work across. The visit is fixed around your opening hours, not ours.
If you cook near Bentley (Hampshire) station, long trading hours wear fan belts and bearings, so noise and vibration are worth reporting early. Occasional-use kitchens, such as a hall kitchen near Church of the Holy Cross or elsewhere in Isington, are where a stiff or seized fan can turn up.
Isington is about 4 miles north-east of Alton, in Hampshire. We provide extract fan repair for commercial premises of every kind in Isington and the rest of Hampshire. We cover 683 places across Hampshire, large and small. You can also see our page for Guildford, roughly 14 miles from Isington.
Here we cover the GU34 postcode area for extract fan repair. We also cover the places around Isington: Binsted (1 mile south), Blacknest (1 mile east), Bentley (1 mile north-east), Bucks Horn Oak (2 miles east) and Frithend (2 miles south-east). Larger places within reach include Basingstoke (11 miles north-west), Farnborough (10 miles north-east), Fleet (7 miles north), Aldershot (7 miles north-east), Alton (4 miles south-west) and Petersfield (12 miles south).
Landmarks near Isington
We work in commercial kitchens and buildings around The Star Inn, among other places. Isington’s nearest station is Bentley (Hampshire) station, roughly 0.8 miles east. A little further out are Chase Community Hospital (5 miles south) and Barley Pound (2.8 miles north-east). Not far away are Farnham Heath and Holybourne Hill.
How the job changes from site to site
Belt-driven fans
Belt-driven fans have a motor that turns the impeller through belts and pulleys. Belts wear, stretch and slip, and pulleys and bearings need checking too.
Impellers and housings
Where an impeller is bent or corroded, cleaning won’t help. It may be replaced on its own, or with the whole fan.
When something else is needed
A few issues sit outside what this work can do:
- Cooking smells reaching neighbours, which may need odour control
- Problems with the gas supply or its interlock valve
- Grease throughout the ductwork, which needs a full TR19 clean
If in doubt, call us on 0345 646 2711 or drop us a line and we’ll say what we think.
Where we work
- Bearings
- Kitchen extract fans
- Fan motors
- Roof and wall fans
- Fan housings
- Belts and pulleys
The process
The first job on site is protection: sheeting goes over floors and surfaces close to the work. Then we make the system safe and start. It takes anything from an hour or two to a full visit, depending on the fault, and the area is cleaned down before we leave. Rural roads and tight entrances are worth telling us about before a visit to Isington.
- A visit is booked, in the evening or overnight if that suits.
- We isolate the extract and open the fan housing.
- We inspect every moving part and the fixings.
- We explain the options and quote a fixed price.
- We complete the work and check the fan runs smoothly.
Before we arrive
- Tell us the best time to work, such as after service or at a weekend
- Clear loose items from the work area
- Let us know about permits to work or site inductions
Getting a quote
Getting a quote does not take long. Send a few details and photos, and we normally reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Read more
Fixed quotes for extract fan repair in Isington
We don’t publish a price list, because no two systems are the same. What we look at:
- Where the site is and how we reach it
- Site rules, permits and inductions
- The scale of the work
- The times the site is available
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. The price is fixed before we start.
What we need to know
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- The postcode and the type of business
- The roof, plant room or outside wall the system runs to
- Any access panels or hatches you can see
- Problems your staff have spotted
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before work begins.
Towns and villages near Isington
What else we do in Isington
Questions from Isington
Will you come out to Isington?
Yes, Isington is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
Who inspects food businesses in Isington?
In Isington, it’s East Hampshire council that carries out food hygiene inspections. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
How far ahead should we book?
Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
What paperwork should we keep on file?
The reports and certificates from each visit, plus your own logs. They’re what an insurer, fire officer or EHO may ask for, so keep them where they can be found quickly.
What causes a noisy extract fan?
Common causes are grease on the impeller, worn bearings, slipping belts and loose mountings. Each sounds a little different and we find the exact cause on site.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
How much time does a fan repair need?
A typical repair takes an hour or two to diagnose, then longer if parts or a new fan are needed including running the fan afterwards. We’ll fit it around the kitchen’s hours wherever we can.