Hampshire · Extract fan repair and replacement
Extract fan repair and replacement in Binsted, Hampshire
Repair and replacement of kitchen extract fans, fan motors and worn fan parts for Binsted, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- A knocking noise from the extract fan
- A dead fan motor
- A squealing belt on start-up
Why it’s worth doing now in Binsted
An overloaded motor is under constant strain. That shortens its life, and when it finally fails, it may take other parts with it. Catching it early keeps the repair small. It’s worth booking a check, because nobody sees inside a duct day to day.
When the work has to happen, how we reach it and how big the site is can all change the price. Each of those is built into the quote and give you a fixed price before any work starts.
Why choose Duct Doctor in Binsted
- In business since 2009
- Every job surveyed first
- Fixed quotes, normally within one working day
- Each visit written up, with pictures
Take a look at how cleaning jobs are priced or how to check a contractor.
About our extract fan repair in Binsted
If an extract fan in Binsted is struggling or has stopped, we diagnose the fault and send you a fixed quote for the repair or the replacement. When the fan gives up mid-service, our 24/7 emergency line is there. The work covers roof and wall fans, bearings and fan motors, and common reasons people get in touch are an extract fan that has stopped working and a knocking noise from the extract fan.
In a small place like Binsted, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
The paperwork matters as much as the work. Each visit is written up with pictures, listing what was done, anything we couldn’t reach and when the next visit is due. File it in your maintenance log so it’s ready for an insurer, fire officer or EHO.
- Place
- Binsted (GU34)
- Wider area
- Hampshire
- Records
- Photo report after every visit
- Quote
- A fixed quote up front
- When we work
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
More services for Binsted
When a fan fails in Binsted
It’s East Hampshire council that sends environmental health officers to food businesses in Binsted. Under food hygiene rules, a kitchen needs suitable and sufficient ventilation. That makes a fan repair urgent rather than something to put off. About 41 miles out from central London, Binsted is part of the South East area we work across. A survey and a fixed quote come first, then the visit at a time that suits you.
If you manage a school such as Binsted Church of England Primary School and the kitchen fan is getting louder, the next break is the time to deal with it.
Binsted is about 4 miles east of Alton, in Hampshire. Whatever kind of site you run in Binsted, extract fan repair is something we can help with. We can work out of hours so trading isn’t interrupted. Across Hampshire, we cover 683 places, and Binsted is one of them. You can also see our page for Guildford, about 15 miles away.
Every address in GU34 is covered for extract fan repair, from busy streets to back roads. If you need extract fan repair at premises on The Street and Lovell Gardens or anywhere close by, we can help. We also cover the places around Binsted: Isington (1 mile north), Blacknest (1 mile north-east), Bucks Horn Oak (2 miles east), Frithend (2 miles east) and Kingsley (2 miles south). Within a short drive, we also cover Basingstoke (12 miles north-west), Farnborough (10 miles north-east), Fleet (8 miles north), Aldershot (8 miles north-east), Alton (4 miles west) and Petersfield (11 miles south).
Local landmarks in Binsted
Typical jobs here are in premises near The Binsted Inn and the streets around them. The closest station to Binsted is Bentley (Hampshire) station, roughly 1.5 miles north-east. Nearby you will also find Allen Gallery (3.8 miles west) and Chase Community Hospital (4.2 miles south). Open spaces near Binsted include Holybourne Hill and Deadwater Valley.
When it’s something else
A few issues sit outside what this work can do:
- Problems with the electrical supply to the fan (an electrician’s job)
- Ductwork designed too small for the kitchen’s cooking
- Gas interlock faults that a Gas Safe registered engineer must deal with
Not sure which it is? You can call 0345 646 2711 or drop us a line and we will tell you honestly before booking.
Parts of the system we cover
- Fan motors
- Bearings
- Kitchen extract fans
- Fan housings
- Roof and wall fans
- Belts and pulleys
Between visits
Good habits slow the build-up between visits. Our tips:
- Tell us about a new rattle or whine straight away
- Book regular TR19 cleaning, which includes the fan
- Clean or change filters on schedule
- Note when the fan trips or cuts out
If the fan had grease on it, the rest of the system almost certainly does too. We can book a TR19® clean of the whole extract, with a certificate and photo report.
Regular TR19 cleaning includes the extract fan. Keeping grease off the impeller is one of the simplest ways to protect it, so planned cleaning helps the fan last.
Binsted: your questions answered
Do you work in villages like Binsted?
Yes. Binsted is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
What if my kitchen extract fan stops in Binsted at night?
Binsted is covered, and our emergency callout runs 24/7. Call 0345 646 2711 and tell us what the fan is doing, or not doing. A photo of the fan’s rating plate helps.
Is it worth cleaning the extract while you are fixing the fan?
Often it makes sense to do both. A TR19 clean covers the canopy, plenum, ductwork and fan, with a certificate and photo report.
Can you supply and fit a replacement fan?
We can. We fit replacement fans as well as repairing old ones and we will talk you through what’s involved.
Where does the waste go?
Waste is contained during the work and removed when we leave, from grease and debris to used cleaning water. We do not leave it behind.
How far ahead should we book?
Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
What accreditations do you have?
Our accreditations are CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Are you fully insured?
Yes. We’re fully insured, and the details are available on request.
What affects the quote in Binsted
The quote reflects the site in front of us. We consider:
- How many systems or sites are involved
- When the work can happen, such as evenings, overnight or weekends
- One-off work versus a regular cycle
- Whether we need access equipment or extra panels
The price reflects the work, not guesswork. That is why every job is surveyed first, and why the quote is fixed before any work starts.
What to send for a quote
Photos let us diagnose from a distance. Try to include:
- Problems your staff have spotted
- How we’d reach plant on a roof or in a plant room
- Any previous report or certificate
- The site address and the type of premises
Quotes are quick. Call or email with a few details and you’ll normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Common problems we fix in Binsted
Any kitchen that cooks for long hours works its fan hard, in Binsted or anywhere else. Belts on a belt-driven fan stretch and wear, so the fan squeals or turns more slowly.
The symptoms we are asked about most are:
- A humming noise from the fan motor
- A worn or slipping fan belt
- A fan rattling in its housing
- A failed fan that needs a replacement
A fan that rarely runs, like one in a hall kitchen near Church of the Holy Cross or elsewhere in Binsted, can seize between uses.
What to look for in a quote
- What’s included in the scope, part by part
- If the quote is a fixed price or an estimate
- Whether a survey comes first
- Whether they’re fully insured
What staff can safely do
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We will take a look and send you a fixed quote.
How it works
Night work is normal for us. Evenings, nights and weekends are when much of our work happens, so the site can open as normal afterwards. On site, the work takes part of a day for most faults, with a return visit if parts have to be ordered. For a village or hamlet like Binsted, tell us about narrow lanes, gates and parking when you book.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- Power to the fan is isolated before we open the housing.
- The impeller, bearings, belts or drive, motor and mounts are all inspected.
- We explain the fault and give you a fixed price for the fix.
- We fix or replace the fan, then test it running before we leave.
Getting ready for the visit
- Name a contact who can let us in at the agreed time
- Tell us the best time to work, such as after service or at a weekend
- Dig out any earlier paperwork for the system
Ask for a quote
We do not publish a price list, because every site is different. Instead, we look at your site first, from photos or a survey, and then give you a fixed quote. To get going, phone us on 0345 646 2711 or email us.