Hampshire · Extract fan repair and replacement
Extract Fan Repair in Bidden
Specialist extract fan repair for Bidden: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- A fan shaking on its mountings
- A humming noise from the fan motor
- A fan rattling in its housing
Your questions about extract fan repair in Bidden
Who inspects food businesses in Bidden?
Food hygiene inspections in Bidden are carried out by Basingstoke and Deane council. A note of when the fan failed and when it was fixed shows the problem was dealt with.
Do you work in villages like Bidden?
Yes. Villages and rural sites across the South East are part of our work, Bidden included. Photos of the system and directions to the site help us plan the visit.
Can you look after several sites?
Yes. Send the list of sites and the work at each and we will quote them together.
What types of premises do you cover?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
What if our extract fan fails during service?
We run a 24/7 emergency callout for exactly this. We will talk it through with you and arrange to attend as soon as we can.
Which records should we keep?
Every certificate and report from each visit, kept together in your maintenance log, along with your own cleaning log. BESA says certificates should show the date, location and technician.
What’s TR19?
A BESA specification in two main parts: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It isn’t legislation, but it’s the standard people check against.
Do you provide a certificate or report?
Yes. You get a written report with photos after each visit, showing what was done, anything we couldn’t reach and when the next visit is due. Kitchen extract cleans to TR19® Grease also get a certificate through the BESCA Vent Hygiene Elite portal.
About our extract fan repair in Bidden
Grease and fans don’t mix. Deposits on the impeller throw it out of balance and the vibration wears out bearings and fixings. So when we repair extract fan, we look at the grease too, and a full TR19® clean can be booked alongside. The work covers fan housings, kitchen extract fans and bearings, and people most often call us about a fan worn beyond sensible repair and a dead fan motor.
In a small place like Bidden, fans are often on an outside wall or roof, open to wind and rain. Weather and grease together wear out motors and bearings.
The sign-off is always in writing: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Location
- Bidden (RG25)
- Region
- Hampshire
- Records
- Written report with photos
- Quote
- Fixed quote, usually within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Towns and villages near Bidden
Also in Bidden
How we price extract fan repair
A fixed price needs a few facts first. We look at:
- The number of sites or systems
- Whether we need access equipment or extra panels
- Whether it’s a one-off visit or part of a schedule
- Site requirements such as sign-in and permits
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we will go through it with you.
What to send for a quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Close-ups of filters, grilles, hatches or access panels
- Your opening hours and when the area is out of use
- The paperwork from the last visit, if you have it
Every quote begins with a look at the system, either from photos and details you send or from a site visit. Then we send a fixed price so you know the cost before we start.
Keeping the system healthy
Good habits slow the build-up between visits. A few tips:
- Book regular TR19 cleaning, which includes the fan
- Make sure the isolator and controls are easy to reach
- Tell us about a new rattle or whine right away
- Save our number for the 24/7 emergency line
If parts have to be ordered, we tell you how the kitchen can carry on in the meantime. We then come back and fit them at a time that suits your service.
Clogged filters make the fan strain. Changing or cleaning them on time takes load off the motor and helps prevent overheating.
Different parts, different methods
Motors and bearings
Motors and bearings take the most strain in a kitchen extract fan. Heat, grease and long running hours all wear them.
Impellers and housings
The impeller does the work of moving air through the system. Grease deposits unbalance it and cause vibration.
Staff cleaning versus specialist work
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Honest limits
Not every problem is solved by extract fan repair, and we’d rather say so up front. It won’t put right:
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
- Cooking smells reaching neighbours, which may need odour control
- Faults in the building’s electrical supply, which need an electrician
If you are not sure, just call us on 0345 646 2711, or email photos and we will give you a straight answer.
What the work covers
- Kitchen extract fans
- Roof and wall fans
- Fan housings
- Bearings
- Fan motors
- Belts and pulleys
The process
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes part of a day for most faults, with a return visit if parts have to be ordered. Visits to a village like Bidden are booked in advance, at a time that suits whoever runs the site.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- With the fan safely isolated, we open it up for a proper look.
- We check the motor, bearings, drive, impeller and mountings.
- You get our diagnosis and a fixed quote to repair or replace.
- The repair or replacement is carried out and the fan is run and checked.
Preparing for the visit
- Clear loose items from the work area
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Tell us the best time to work, such as after service or at a weekend
Getting a quote
To get a fixed quote, call us on 0345 646 2711 or use the quote form and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will typically have a quote within one working day.
Advice
Extract fan repair around Bidden
We cover Bidden, about 43 miles from central London, as part of our work across London and the South East. Evening, overnight and weekend visits are all possible. Kitchens in Bidden get their food hygiene inspections from Basingstoke and Deane council. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. So a failed fan is worth fixing before the next service, not the next month.
A fan that rarely runs, like one in a hall kitchen near Church of St Mary or elsewhere in Bidden, can seize between uses. Holidays are the time to replace a tired kitchen fan at schools such as Robert May's School, rather than mid-term.
Bidden is about 4 miles south of Hook, in Hampshire. Bidden gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Bidden is one of 683 towns, villages and districts in Hampshire where we work for extract fan repair. There’s also a page for Reading, about 15 miles away.
Every address in RG25 is within our area for extract fan repair, from the main roads to the quietest streets. Whether your site is on Bidden Road, Elder Dell and Meadowside or anywhere close by, we can help. Other places close to Bidden include Little Hoddington (1 mile west), South Warnborough (1 mile south-east), Long Sutton (2 miles east), Greywell (2 miles north-east) and Up Nately (2 miles north). Larger places within reach include Basingstoke (5 miles north-west), Farnborough (11 miles north-east), Fleet (7 miles north-east), Aldershot (10 miles east), Alton (6 miles south) and Yateley (10 miles north-east).
What’s near Bidden
Around Bidden, our work takes us to kitchens and buildings near Hoddington Arms Public House. The nearest railway station is Hook station, about 3.6 miles north. Other landmarks nearby include Gliding Heritage Centre (3.4 miles south-west) and Odiham Castle (2.5 miles north-east). Open spaces near Bidden include The Mill Field and Holybourne Hill.
Why it’s worth doing now in Bidden
Some kitchens run a noisy fan on a lower speed to cut the noise. That reduces extraction without fixing anything while the underlying wear continues. A proper diagnosis in Bidden gets to the real cause. A fault that closes a site in a village like Bidden affects everyone who depends on it.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why book with us
- One contact for all your sites in London and the South East
- Survey first, then a fixed quote
- In business since 2009
- Out-of-hours work and a 24/7 emergency line