Kent · Extract fan cleaning
Extract Fan Cleaning in Staple
Professional extract fan cleaning in and around Staple, booked around your opening hours and finished with a written report and photos.
- A fan coated in grease inside its housing
- Rough running from the extract fan
- Fat spreading onto the roof or wall by the fan
Aftercare tips
Once we have finished, these simple steps help:
- Keep each photo report with the maintenance log
- Keep access to the fan clear
- Run the extract throughout cooking
- Report rattles or humming early
File the photo report with your other extract records. It gives a dated record of the fan’s condition, which helps if anything changes later.
Keep the whole system on its cleaning cycle. Regular full cleans keep the fan from building up heavy deposits, in line with BESA guidance.
How we handle extract fan cleaning in Staple
Kitchen extract fans come in different forms: fans on the roof, fans built into the duct run, and fans on an outside wall. The way in depends on the type and the survey shows us how to reach it. Typical jobs include weak extraction at the canopy and a fan that has never been cleaned, on roof-mounted fans, axial fans and centrifugal fans.
In a village or hamlet like Staple, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.
Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Place
- Staple (CT3)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Price
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Staple kitchens: local notes
According to Food Standards Agency records, there are about 5 pubs, bars and clubs in Staple and the streets around it, up to about 1.5 miles out. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Staple sits within the area of Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. It’s Dover council that sends environmental health officers to food businesses in Staple. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
If you run catering at a historic house or estate in the area (Goodnestone Park is about 1.9 miles south-west), event kitchens in older buildings often have awkward duct runs that need planning. Church and community hall kitchens, near Church of St James or anywhere around Staple, are easy to forget, but their extracts collect grease like any other.
Staple is about 7 miles north-west of Deal, in Kent. Staple gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Our area takes in 922 places across Kent, from busy centres to quieter spots. Maidstone is in our area too, about 32 miles from Staple.
Every address in CT3 is covered for extract fan cleaning, from busy streets to back roads. If you need extract fan cleaning at premises on The Street, Rowan Close and School Lane or a nearby road, we can help. We also cover the places around Staple: Barnsole (1 mile south-east), Twitham (1 mile west), Durlock (1 mile north), Flemings (1 mile east) and Guilton (1 mile north-east). Further out, we also cover Canterbury (8 miles west), Margate (10 miles north-east), Dover (9 miles south), Folkestone (13 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Near you in Staple
Typical jobs here are in premises near The Three Tuns pub. The nearest railway station is Adisham station, roughly 2.9 miles south-west of the centre. Nearby you’ll also find White Mill (3.3 miles east). Open spaces near Staple include Monk's Wall nature reserve.
When it’s something else
We’d rather tell you now than book work that won’t help, so these are the things it will not cover:
- A faulty speed controller or isolator
- An impeller that is bent or split
- A fan that will not start
If in doubt, give us a ring on 0345 646 2711, or email photos and we’ll say what we think.
Where we work
- In-line fans
- Fan housings
- Discharge points
- Axial fans
- Centrifugal fans
- Roof-mounted fans
Different parts, different methods
Inline duct fans
Space around an inline fan can be tight, so the method is planned in advance. If it cannot be reached fully, the report says so.
Kitchens with long cooking hours
A long-hours kitchen cannot afford a fan failure. A clean fan is less likely to strain, and our 24/7 emergency callout is there if it happens anyway.
Why it’s worth doing now in Staple
Vibration from an unbalanced impeller doesn’t stay small. It can wear the bearings and lead to failure and a kitchen cannot cook safely without extraction. Cleaning it early is far less disruptive. It’s worth booking a check, because nobody sees inside a duct day to day.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all play a part.
Why us?
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- We are fully insured
- Accredited under CHAS and SafeContractor, with ISO 9001
- Ventilation hygiene specialists since 2009
Take a look at how cleaning jobs are priced and our accreditations and certificates.
Managing agents and facilities teams in Staple
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.
Managing agents often deal with us directly. Send the address, what’s needed and how access works, and we’ll send a fixed quote.
What staff can safely do
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
Common questions in Staple
Who is the fire and rescue service for Staple?
Fire safety enforcement in Staple is handled by Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Can you clean school kitchen extracts in Staple during the holidays?
Yes. The holidays are the usual time for school work. The FSA’s register shows about 3 schools and colleges with food registrations within roughly a mile and a half of Staple. You can call 0345 646 2711, or send details by email with the dates the site is empty.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before work begins, and waste is contained as we go. Before we leave, we tidy up and clean down.
Do you work in Staple?
Yes. Our area takes in London and the counties of South East England, Staple included.
How long will it take to clean the fan?
It takes a few hours where there are several fans or heavy deposits. Your quote will give an idea.
Is it safe to clean the fan while the kitchen is open?
The fan must be isolated, for safety. We clean out of hours, in the evening, overnight or at weekends, so cooking is not affected.
Why has my extract fan got louder?
A common cause is grease. Grease collects unevenly and unbalances the impeller, causing vibration and noise. Cleaning may sort it, but worn bearings or a failing motor need a repair.
Can you set up regular visits?
Yes. Tell us what you have and how it’s used and we will propose a schedule with a fixed quote.
More services for Staple
How the visit works
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. The timing of a visit to Staple is set by you, and the travel is our side of the planning.
- The fan is found and its type, access and isolation checked.
- We isolate the power before opening the housing.
- We scrape the heavy grease from the blades and housing.
- The fan is degreased, taking care around the motor.
- It’s closed up, run, checked and photographed for the report.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Plan for cooking equipment or plant to be off before we arrive
- Let us know about permits to work or site inductions
How to get a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.