Greater London · Extract fan cleaning
Bellingham extract fan cleaning
Specialist extract fan cleaning for Bellingham: diagnosis first, then a fixed quote, the work and a report with pictures. Ask us for a fixed quote.
- Thick grease on the impeller and casing
- A fan left out of previous cleans
- Vibration from an unbalanced impeller
What a clean will not put right
An honest diagnosis matters more to us than a booking, so here’s what extract fan cleaning won’t do:
- An undersized fan that cannot cope
- Grease in the duct and canopy before the fan (those need a full TR19 clean)
- A faulty speed controller or isolator
Not sure which it is? You can call us on 0345 646 2711 or use the quote form and we’ll tell you honestly.
Where we work
- Fan housings
- In-line fans
- Roof-mounted fans
- Centrifugal fans
- Axial fans
- Discharge points
Extract fan cleaning in Bellingham, done properly
Kitchen extract fans come in different forms: roof-mounted units, inline fans within the duct, and wall fans. Each is isolated and opened in its own way and the survey shows us how to reach it. The work covers axial fans, fan housings and discharge points, and the jobs we see most are a fan coated in grease inside its housing and grease around the motor and its mounts.
In a London area like Bellingham, a kitchen extract often passes through shared space on its way out: a riser, a service void, the floors above. Grease in a duct like that is a fire risk to the whole building, not just the kitchen, which is why keeping it clean to TR19® matters.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Place
- Bellingham (SE6, SE26, SE23)
- Wider area
- Greater London
- Paperwork
- Certificate plus before-and-after photos
- Price
- A fixed price before work begins
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Places near Bellingham
Also in Bellingham
What happens on the day
The visit has three parts: getting the area ready, doing the work and signing it off. Set-up means sheeting and making equipment safe, and the sign-off is a written report with pictures. The middle part takes longest, and that takes a few hours where there are several fans or heavy deposits. For a job in Bellingham, tell us about loading bays, permits, lifts and roof access when you book.
- Diagnosis first: we look for grease, noise and vibration.
- Once isolated, we open the fan up.
- The impeller is cleaned blade by blade so it runs balanced.
- Housing, outlet and the area around the motor are cleaned.
- We run the fan and note its condition in the photo report.
How to prepare
- Move anything stored near the system
- Dig out any earlier paperwork for the system
- Make sure someone can let us in and lock up afterwards
Getting a quote
For a fixed quote, ring 0345 646 2711, or email photos with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. You’ll normally have a quote within one working day.
Related advice
Your questions about extract fan cleaning in Bellingham
Who is the fire and rescue service for Bellingham?
That’s London Fire Brigade. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Which environmental health team covers Bellingham?
That is Lewisham council, whose environmental health officers carry out food hygiene inspections in Bellingham. An officer may look up into the canopy, so clean filters on the day and a recent certificate on file both help.
Do you have a 24/7 line?
Yes, day and night, every day of the year. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
Which kinds of sites do you work on?
All kinds of commercial and public premises: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
Do you survey before quoting?
Yes, always. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it, and the quote is based on that.
Should the extract fan be cleaned as part of TR19?
Yes, a full TR19 clean includes the fan. Anything that cannot be reached is recorded, so you always know what was cleaned.
Why has my extract fan got louder?
An unbalanced impeller, normally from uneven grease, is a common cause. We clean the fan and tell you if anything else, like worn bearings, is to blame.
What information do you need?
Where the site is, what it is and when it’s open, plus photos of the system and your last certificate or report if you have one.
Managing agents and facilities teams in Bellingham
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
We also work for facilities teams across offices, schools and healthcare in Bellingham and across Greater London. Larger estates can be phased building by building to keep disruption down.
When to call us in Bellingham
Grease on a fan is a fire risk, in Bellingham as anywhere. A fire in the duct can reach the fan and the grease around it, and a hot, struggling motor doesn’t help.
These are the problems we see most often:
- Grease stains around the discharge
- Vibration from an unbalanced impeller
- Grease around the motor and its mounts
- Thick grease on the impeller and casing
Where a hall near St Dunstan, or anywhere in Bellingham, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
What to look for in a quote
- Whether VAT is included
- Proof of accreditation you can verify
- Whether the price is fixed
- Whether a written report and pictures are included
Fixed quotes for extract fan cleaning in Bellingham
There’s no set price list, because no two systems are the same. The quote depends on:
- The condition we find in the survey
- Whether several sites go on one quote
- Any permits to work or inductions
- One-off work versus a regular cycle
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before work begins.
What to send for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The times we could work without disrupting the site
- A few general shots of the system
- How we’d reach plant on a roof or in a plant room
- Detail shots of panels, filters and grilles
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and we can price many jobs without a visit.
Bellingham kitchens: local notes
Food Standards Agency records list about 231 restaurants, cafés and works canteens and about 135 takeaways within roughly a mile and a half of the centre of Bellingham. Grease builds up on fan blades and housings in kitchens like these, unbalancing the impeller. Environmental health officers from Lewisham council inspect food businesses in Bellingham. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Keeping each certificate and photo report on file helps show the extract is looked after. Bellingham is covered by London Fire Brigade. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
Commuter trade near Bellingham station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands. Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Bellingham is University Hospital Lewisham, about 1.6 miles north.
Bellingham is about 2 miles north of Beckenham, in Greater London. Bellingham gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. We cover 764 places across Greater London, from busy centres to quieter spots. There’s also a page for London, about 6 miles away.
Every address in SE6, SE26 and SE23 is within our area for extract fan cleaning, from the main roads to the quietest streets. We cover sites on Oslac Road, Orford Road and Aitken Road and nearby roads. Being close to the A2218, Bellingham is simple for us to get to at any hour. Other places close to Bellingham include Southend (1 mile north), Bell Green (1 mile west), Catford (1 mile north-east), Perry Vale (1 mile west) and Sydenham (1 mile west). Within a short drive, we also cover London (6 miles north-west), City of Westminster (8 miles north-west), Marylebone (8 miles north-west), Kensington (9 miles north-west), St Pancras (8 miles north-west) and Shoreditch (7 miles north).
Local landmarks in Bellingham
Typical jobs here are in premises near Sedgehill School, Forster Memorial Park and Allenby Tutorial Trust, among other places. Bellingham has its own railway station: Bellingham station. A little further out are Prefab Museum (1 mile east) and University Hospital Lewisham (1.6 miles north). Not far away are Downham Woodland Walk and Knight's Hill.
Staff cleaning versus specialist work
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Looking after it afterwards
Good habits slow the build-up between visits. A few tips:
- Check the report shows the fan was cleaned
- Run the extract throughout cooking
- Report grease escaping from the fan
- Keep access to the fan clear
You get before and after photos of the impeller and housing. It notes what was done and anything that couldn’t be reached, along with the recommended next clean date.
The fan stays cleaner when less grease gets past the canopy. Clean, well-seated filters are the fan’s first protection, and replace any that are damaged.