Portsmouth · Ductwork cleaning
Ductwork cleaning in Milton, Portsmouth
We cover Milton for ductwork cleaning. Out-of-hours visits, a fixed quote and a written report with photos as standard.
- An insurer asking for TR19 evidence
- Duct runs that cannot be reached
- Fat dripping from the ductwork
Multi-site and managed buildings
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we will send a fixed quote.
About our ductwork cleaning in Milton
The ductwork is where an extract clean is won or lost. Sections with no way in can go uncleaned for years. We open up every reachable section and record any we can’t reach, so you know exactly where you stand. If you’re dealing with proof of duct cleaning for the insurer and grease leaking from duct joints, we can help.
Size does not change the work: a kitchen in a place like Milton gets the whole system cleaned, canopy to discharge. We plan the visit around your hours, with the journey sorted in advance.
A written report with photos follows every visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Milton (PO4, PO3, PO1)
- Wider area
- Portsmouth
- Reporting
- Certificate and photo report
- Price
- Fixed quote, typically within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Why act early in Milton
Grease left in a duct in Milton hardens over time. It bakes into a hard layer that takes far longer to remove, which makes each delayed clean a bigger one. A quieter site near Milton still needs its system looked after.
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Why us?
- Survey first, then a fixed quote
- In business since 2009
- We are fully insured
- CHAS, SafeContractor and ISO 9001
Honest limits
Ductwork cleaning cannot fix everything, and we’d rather say so up front. It does not solve:
- A duct that’s too small or badly routed for the kitchen (a design issue)
- Ductwork that is corroded, split or holed (that needs a ductwork contractor)
- A damper stuck open in the duct
Not sure which it is? You can ring 0345 646 2711 or use the quote form and we’ll tell you honestly.
Where we work
- Bends and junctions
- Horizontal duct runs
- Attenuators
- Multi-storey ducts
- Access panels
- Vertical risers
Milton questions
Does being near the coast affect ductwork cleaning in Milton?
It can. Salt air reaches Milton, which is within about 1 mile of the coast, and it speeds up rust. Rooftop fans, discharge cowls and fixings are checked for corrosion as well as grease.
Who enforces fire safety at workplaces in Milton?
Milton is in the area of Hampshire and Isle of Wight Fire and Rescue Service. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
How much notice should we give?
Book as early as you can for planned work, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
How do you keep the site clean during the work?
With sheeting and covers, before anything else happens. The work is kept contained and clean down when we finish.
Is a quote from pictures possible?
Yes, where the photos show enough. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
Do you have insurance?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it for clients who vet their contractors.
How do you clean inside the ductwork?
After a survey and grease readings, the duct is opened up through its access panels. Each run and riser is scraped and degreased, then the readings are repeated.
What happens if you cannot reach some of it?
The report shows them clearly. In ductwork, new access panels are often the answer, and we can fit those.
How the job changes from site to site
Attenuators and discharge
Near the discharge, the air has cooled the most, so it can collect more grease than expected. We include it in the clean and the readings.
Vertical risers
A riser takes the duct up through one or more floors. Grease collects on the walls and at the foot of the riser, so the base is one of our test points.
When to call us in Milton
A vertical riser can run up several floors. Grease clings to the walls and can run down to the base as liquid grease runs down. Access along its height is needed to clean it properly.
The symptoms we’re asked about most are:
- A duct clean needed for an insurer
- Gaps where access panels were never fitted
- Grease pooling at the foot of the riser
- Readings above 200 microns from a grease thickness test
For kitchens close to Fratton station, where the day often starts early and ends late, the extract can be cleaned overnight.
Comparing quotes
- How areas they can’t reach will be recorded
- Whether the quote shows VAT
- Whether a written report and pictures are included
- Which accreditations they hold, and whether you can check them
Also in Milton
Grease, kitchens and Milton
Milton lies within about 1 mile of the sea. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. There are about 132 restaurants, cafés and works canteens and about 103 sandwich bars and takeaways in and around Milton, up to about a mile and a half out, according to the Food Standards Agency’s register. Where they cook under a canopy, grease doesn’t stop at the filters: it settles along the duct and up the riser. Milton is covered by Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
If you look after a school kitchen, at a school such as Meon Junior School or anywhere near Milton, the holidays are the usual time for a TR19® clean. A hospital like St. Mary's Hospital, about within half a mile north-west, is the kind of site where a kitchen may cook for patients, staff and visitors all day.
Milton is about 1 mile south-east of Portsmouth, in Portsmouth. Sites in Milton get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with pictures. Our Portsmouth coverage runs to 19 places, and Milton is one of them.
Ductwork cleaning in PO4, PO3 and PO1 is surveyed, quoted and booked the same way as anywhere else. Whether your site is on Liss Road, Meon Road and Aston Road or anywhere close by, our technicians can take on the work. If your site is just outside Milton, we cover Kingston (1 mile north-west), Fratton (1 mile north-west), Southsea (1 mile south-west), Baffins (1 mile north) and Copnor (1 mile north). We also work in nearby towns such as Wymering (4 miles north), Paulsgrove (4 miles north), Cosham (3 miles north), Drayton (4 miles north) and Farlington (4 miles north).
Near you in Milton
We work in commercial kitchens and buildings around The Milton Arms, Mary Rose School and St Edmund's Catholic School. The nearest railway station is Fratton station, about 0.6 miles west of the centre. A little further out are Eastney Beam Engine House (0.7 miles south-east) and St. Mary's Hospital (within half a mile north-west). Open spaces near Milton include Portsdown Hill and Milton Locks.
What your team can do, and what needs us
Staff cleaning does not replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
How it works
When we arrive, we check the system against the survey or the pictures you sent. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes from a few hours to more than one visit, depending on duct length and access. Everything the job in Milton needs is worked out beforehand, from the survey.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, photos and a next clean date.
How to prepare
- Clear loose items from the work area
- Dig out any earlier paperwork for the system
- Plan for cooking equipment or plant to be off before we arrive
Get a fixed quote
Need a price for ductwork cleaning? Please phone us on 0345 646 2711 or use the quote form and tell us about the site. We’ll talk you through the work and send you a fixed quote before anything is booked.