Medway · Air handling unit cleaning

AHU Cleaning in Cooling

Professional AHU cleaning in and around Cooling, booked around your opening hours and finished with a written report and pictures.

  • Dust built up on fan impellers
  • Air handling units with blocked filters
  • Dirty coils holding back the airflow

Book AHU cleaning in Cooling

AHU cleaning for kitchens and businesses in Cooling

We clean the parts of the unit where dirt and moisture gather: filters, coils, drain trays, fans and the internal panels. Every clean comes with a TR19® certificate and before and after photos in a report. If you are dealing with odours coming through the supply air and debris and leaves in the fresh air intake, we can help, from heating and cooling coils, dampers and louvres and filter sections onwards.

In a village or hamlet like Cooling, few buildings have mechanical ventilation, but those that do need it inspected and cleaned like any other.

The report is your system’s health record: dated, with pictures, and showing what was done. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal and sits alongside the report.

Before and after view down the inside of a rectangular extract duct
Where
Cooling (ME3)
Region
Medway
Paperwork
Report and photos after the visit
Price
Fixed quote, normally within a working day
When we work
Nights, weekends or holidays to suit you
Phone
0345 646 2711
Updated
30 October 2026

Your questions about AHU cleaning in Cooling

Do you work overnight in Cooling?

Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. When you give us a ring on 0345 646 2711 or email us, mention when the site is quiet.

Do you work in villages like Cooling?

Yes, Cooling is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.

What’s TR19?

TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.

Can one contract cover all our sites?

Yes. Send the list of sites and the work at each and you’ll get one fixed quote.

Do you need to switch the unit off?

Yes. The fan must be stopped and the unit isolated, and we time the work to suit the site.

What do you do with what you remove?

It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.

Do you offer emergency callouts?

Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.

How often do AHUs need cleaning?

Under TR19® Air, cleaning is led by inspection and risk rather than a set calendar. We recommend a next date in each report.

Leave it or put it right?

A slimy drain tray only gets worse. Leave it and you risk overflows, leaks into the space below and odours carried round the building. Dealing with it early keeps the clean straightforward. Planning a trip to Cooling ahead is easier for everyone than a rushed one.

Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we’ll go through it with you.

Why us?

  • Accredited under CHAS and SafeContractor, with ISO 9001
  • Fully insured
  • Work around your opening hours, with 24/7 emergency cover
  • A written report with photos after each visit

Read what affects the cost or how to check a contractor.

What your team can do, and what needs us

Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.

Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.

Fixed quotes for AHU cleaning in Cooling

You’ll get a fixed price before work begins. It takes into account:

  • Whether several sites go on one quote
  • The scale of the work
  • Travel, parking and unloading
  • How easy every part is to reach

Every site is different, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.

Asking for a quote

You don’t need the technical terms. Just send:

  • The roof, plant room or outside wall the system runs to
  • Close-ups of filters, grilles, hatches or access panels
  • The times we could work without disrupting the site
  • Your last certificate, test record or report

For a fixed quote, call 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. You’ll normally have a quote within one working day.

Landlords, agents and facilities managers

The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.

Whether it’s one building or many, the standard is the same: diagnosis, a fixed price, work booked around your hours and a written report with pictures.

Different parts, different methods

Fans and fan sections

Every bit of air passes the fan, so a dirty fan sends dirt downstream. We clean the impeller, housing and surrounding section.

Rooftop and plant room units

Rooftop units take the weather, and intakes can collect leaves and debris. The intake section gets particular attention.

Do you need AHU cleaning in Cooling?

An AHU’s intake draws in outdoor air and everything in it: dust, pollen, leaves and debris. The intake section and first filters take the brunt, and some travels further into the unit.

What we are most often called out for:

  • Dust-coated heating and cooling coils
  • Dirty fans and fan housings
  • Plant that has been serviced but not cleaned
  • Condensate trays that won’t empty

For buildings in and around Cooling, TR19® Air cleaning starts with an inspection.

What your quote should include

  • How areas they cannot reach will be recorded
  • Whether the price is fixed
  • Whether they’re fully insured
  • What’s included in the scope, part by part

Choosing a duct cleaning contractor

What happens on the day

We are used to working while the site is closed. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes half a day to a full day per unit, with large plant planned over several shifts. We agree a date with you, plan the drive to Cooling and turn up when the site is quiet.

  1. We look at the unit and the plant area during the survey.
  2. The area is protected and the unit made safe.
  3. Dirt and debris are removed from each section.
  4. Coils and trays are cleaned and the condensate drain cleared.
  5. We close every panel, hand the unit back and send the report and certificate.

Preparing for the visit

  • Mention any parking or loading restrictions
  • Make sure equipment near the work can be switched off and left to cool
  • Clear the space around the work

Getting a quote

Here’s what helps us quote: where the site is, what it is and its opening hours, a few pictures and any previous report or certificate. Then give us a ring on 0345 646 2711 or drop us a line.

Ask for a quote

Advice

AHU cleaning in Cooling: local notes

Food Standards Agency data includes about 3 schools, colleges and universities in and around Cooling, up to about a mile and a half out. Buildings like these often rely on mechanical ventilation, which TR19® Air covers. Cooling’s nearest hospital, French Hospital, is about 4.8 miles south. If you run a surgery, clinic or care home, your ventilation deserves the same care as a hospital’s, on a smaller scale. Cooling, about 27 miles from central London, is within our usual area. Visits are booked around your hours, evenings and weekends included.

If you run a surgery, dental practice or care home near Cooling, clean ventilation matters as much to you as to a hospital like French Hospital (about 4.8 miles south).

Cooling is about 5 miles north of Rochester, in Medway. From the centre of Cooling to the outskirts, we cover AHU cleaning for every kind of premises, from small sites to large estates. Our area takes in 68 places across Medway, large and small. We also work in Maidstone, around 13 miles away.

Postcode districts we cover here for AHU cleaning: ME3. That includes premises on Main Road and Cooling Road and the roads around them. Nearby, we also carry out AHU cleaning in Cooling Street (1 mile south-west), High Halstow (2 miles east), Sharnal Street (2 miles south-east), Fenn Street (2 miles east) and Chattenden (2 miles south). We also work in nearby towns such as Gillingham (6 miles south), Chatham (7 miles south), Rochester (5 miles south), Rainham (7 miles south-east), Strood (5 miles south-west) and Luton (6 miles south).

Local landmarks in Cooling

For rail, the closest station is Higham station, roughly 3.3 miles south-west of the centre. A little further out are Upnor Castle (3.4 miles south) and French Hospital (4.8 miles south). Open spaces near Cooling include Canvey Wick and Gad's Hill.

Map of Cooling © OpenStreetMap contributors
BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London