East Sussex · Air handling unit cleaning

Air handling unit cleaning in Broad Street, East Sussex

Looking for AHU cleaning in Broad Street? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and pictures.

  • Dirty fans and fan housings
  • Filters that are clogged or overdue
  • Air handling units due a clean after building work

AHU cleaning across Broad Street

AHU cleaning for kitchens and businesses in Broad Street

If the units serving a building in Broad Street have only had filter changes for years, there may be dirt on the coils, fan and casing that nobody has looked at. A full clean deals with all of it. If you have dirty fans and fan housings and air handling units due a clean after building work, we can help.

Work in a small place like Broad Street starts with agreeing access and timings.

It’s worth checking any contractor’s accreditations. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.

Inside an extract duct: heavy deposits on the left, cleaned metal on the right
Where
Broad Street (TN36)
Wider area
East Sussex
Records
Written report with photos
Quote
A fixed price before we start
When we work
After hours by arrangement; emergencies any time
Telephone
0345 646 2711
Updated
30 October 2026

Leave it or put it right?

A clean unit feeds cleaner air into the ductwork, so the ducts and grilles stay cleaner between cleans. It also means the next inspection has less to find. Rural sites cannot always move to another kitchen or room when something fails.

The cost depends on the size of the system, the condition it’s in and how easy it is to reach. We give you a fixed price before work begins, so there are no surprises.

Why book with us

  • A single point of contact for sites across the South East and London
  • Every job surveyed first
  • Every visit written up, with photos
  • CHAS and SafeContractor accredited, with ISO 9001

Take a look at what affects the cost and our accreditations.

What happens on the day

Protection comes first: sheeting goes over floors and surfaces close to the work. After that, the system is made safe and the work begins. The work on site takes anything from half a day for one small unit to several shifts for a plant room full of them, and we clear up before we go. A quick note on how to find the site and where to park makes a visit to Broad Street run smoothly.

  1. First we agree when the unit can be switched off, including evenings or weekends.
  2. We take before pictures of each section of the unit.
  3. We work through the unit from the intake to the outlet.
  4. The fan and drain tray are cleaned and the drain checked.
  5. After pictures are taken and the certificate issued.

Before we arrive

  • Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
  • Arrange a key holder or contact on site
  • Have your last certificate or report to hand

How to get a quote

The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.

Ask for a quote

Advice

Signs you need AHU cleaning in Broad Street

Cooling coils create condensation, and that water has to go somewhere. A blocked outlet or a badly sloped tray leaves standing water, and that is where slime and odours start.

Signs it’s time to call us include:

  • Odours coming through the supply air
  • Dirty fans and fan housings
  • Plant that needs cleaning after a refit
  • Dust-coated heating and cooling coils

School buildings such as Icklesham Church of England Primary School are usually done in the holidays, so classrooms aren’t disturbed.

What your quote should include

  • When the next visit should be, and why
  • How areas they cannot reach will be recorded
  • What hours they’ll be on site
  • What insurance they carry

How to choose an extract cleaning contractor

What AHU cleaning looks like in Broad Street

The nearest hospital to Broad Street is Conquest Hospital, about 4.3 miles south-west. Hospitals show how much a building can rely on its ventilation, and smaller healthcare sites rely on theirs too. About 51 miles out from central London, Broad Street is part of the South East area we work across. The visit is fixed around your opening hours, not ours.

Conquest Hospital, about 4.3 miles south-west, is the nearest hospital to Broad Street, and healthcare sites of every size need their supply air kept clean.

Broad Street is about 5 miles north-east of Hastings, in East Sussex. Across the TN36 area, we can carry out AHU cleaning at your premises. Broad Street is one of 289 towns, villages and districts in East Sussex where we work for AHU cleaning. Our Maidstone page covers sites nearby (25 miles or so).

Work in TN36 follows the same survey, fixed quote and written report as everywhere else we cover. Other places close to Broad Street include Icklesham (1 mile east), Udimore (1 mile north), Cock Marling (2 miles north-east), Three Oaks (2 miles south-west) and Broadland Row (2 miles north-west). Further out, we also cover Hastings (5 miles south-west), Bexhill-on-Sea (9 miles south-west), St Leonards (6 miles south-west), Hastings Old Town (5 miles south-west), Belmont (5 miles south-west) and Hollington (5 miles south-west).

Near you in Broad Street

The nearest railway station is Doleham station, roughly 1.8 miles west. Well-known places in the area include Camber Castle (3.7 miles east) and Winchelsea Court Hall Museum (2.5 miles east). For a walk, there’s Flatropers Wood.

Map of Broad Street © OpenStreetMap contributors

Between visits

Simple habits between visits make a real difference. Our advice:

  • Flag stale or damp smells in the supply air
  • Note any water around the unit or leaks below it
  • Make sure condensate is draining away
  • Don’t store bins or materials near the intake

We recommend when the unit should next be inspected or cleaned, based on what we found. Under TR19® Air the timing is set by inspection and risk, not a fixed calendar.

Change or clean filters on time. Overloaded filters let more dirt through to the coils and fan.

Managing agents and facilities teams in Broad Street

We regularly work with managing agents. Send the address, what’s needed and how access works, and we’ll send a fixed quote.

Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.

In-house cleaning or a specialist?

Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.

Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.

When it’s something else

To be straight with you, there are a few things this work won’t fix:

  • Controls and BMS settings that run the unit
  • Faulty motors, drives or bearings
  • Ventilation that was badly designed in the first place

If you’re not sure, just call us on 0345 646 2711 or use the quote form and we’ll give you a straight answer before you book.

What we work on in Broad Street

  • Drain trays
  • Filter sections
  • Supply and extract fans
  • Dampers and louvres
  • Internal panels
  • Heating and cooling coils

FAQs for Broad Street

Will you come out to Broad Street?

Yes. Broad Street is within the area we cover across London and the South East. The journey is planned ahead, so a few details about the route help.

Is Broad Street in your area for AHU cleaning?

Yes, we work in Broad Street and the places around it. To start, call us on 0345 646 2711 or use the quote form with a few photos of the system.

How much notice should we give?

Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.

How often do AHUs need cleaning?

TR19® Air takes a risk-based approach, so it depends on inspection rather than a fixed interval. Each report suggests when the unit should next be looked at.

What is TR19?

TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.

How much does AHU cleaning cost?

The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote and we will typically reply within one working day.

Is there a report after cleaning?

Yes, a TR19® certificate and a photo report. It includes a recommended date for the next check.

How long does it take to clean an air handling unit?

The work takes half a day to a full day per unit, with large plant planned over several shifts. Bigger units can be phased, so call 0345 646 2711 or send us an email to talk it through.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London