Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Walmer, Kent
TR19 inspections and grease testing in Walmer, surveyed first and signed off with a written report and photos. Ask us for a fixed quote.
- Cleaning intervals that may not suit the kitchen
- Systems that need surveying before cleaning
- Checking the result of a recent clean
What we do, step by step
Your staff don’t need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. Everything the job in Walmer needs is worked out beforehand, from the survey.
- First we look at the system’s cleaning history, if there is one.
- We follow the extract from canopy to discharge.
- We note where access panels are and where more are needed.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Preparing for the visit
- Dig out any earlier paperwork for the system
- Move anything stored near the system
- Let us know about parking and loading
Getting a quote
Need a price for TR19 inspection? Please give us a ring on 0345 646 2711, or send details by email and tell us about the site. We’ll talk you through the work and send you a fixed quote before you commit to anything.
Related advice
TR19 inspection in Walmer
TR19® Grease says grease should not exceed a mean of 200 microns between cleans, while a reading of 500 microns or more anywhere calls for immediate spot cleaning. Testing is how you know where your system stands. If you have kitchen extract systems with no recent grease readings and uncertainty over how often to clean, we can help, from pre-clean surveys, post-clean checks and wet film thickness tests onwards.
Kitchens around a place like Walmer are often in older buildings or single-storey extensions, where the duct may cross a roof void or climb an outside wall. Long horizontal runs like that hold grease and need access panels to reach.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Where
- Walmer (CT14)
- Region
- Kent
- Paperwork
- Certificate plus before-and-after pictures
- Price
- A fixed quote up front
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Why it’s worth doing now in Walmer
After an incident, an insurer can ask to see proof of TR19 cleaning and inspection. Missing records can put a claim at risk. An up-to-date inspection report is a good place to start. It’s easy to lose track of when the work was last done on a quieter site.
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before we start.
Why us?
- Fully insured
- Ventilation hygiene specialists since 2009
- Fixed quotes from a survey or photos
- Evenings, overnight and weekends, plus 24/7 emergency callout
Take a look at what affects the cost or our accreditations.
Towns and villages near Walmer
Also in Walmer
What affects the quote in Walmer
We quote each job individually. This is what makes a difference:
- The condition of the system
- Parking and loading at the site
- How easy every part is to reach
- Site rules, permits and inductions
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we will explain each part.
What to send for a quote
Many jobs can be priced from photos and some basics. Useful things to send:
- Where the site is and what kind of site it is
- How we’d reach plant on a roof or in a plant room
- Problems your staff have spotted
- Any previous report or certificate
Quoting starts with a diagnosis, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before work begins.
What your team can do, and what needs us
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, next to our reports.
Multi-site and managed buildings
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed quote.
Keeping records across a portfolio is half the battle. Each visit ends with a dated report and photos, so you can show an insurer or inspector what was done at each site.
How the job changes from site to site
Vertical risers
Risers in multi-storey buildings can pass through other areas, so we arrange access ahead of time.
Extract fan and discharge
Grease on the fan adds to wear. Readings show if it needs attention before the next clean.
FAQs for Walmer
Is TR19 inspection any different in a coastal place like Walmer?
Yes, to a degree: at about 1 mile from the coast, Walmer gets salt-laden air that corrodes metal faster. Outdoor metalwork near the sea is worth inspecting at each visit.
Do you work in villages like Walmer?
Yes, we work in villages as well as towns, and Walmer is covered. Just mention lanes, gates or anything else about the site when you book.
Which kinds of sites do you work on?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
How long does grease testing take?
An inspection takes around an hour or two per canopy and duct system. Sites with several canopies take longer, and you can ring 0345 646 2711 or drop us a line to book it in.
Can you look after several sites?
Yes. We work across South East England and London, so sites at different addresses can be planned together on one programme. Every site has its own report.
Will you produce a report for our insurer?
Yes. Our TR19 audits cover readings, photos, access and a recommended cleaning interval. It’s set out for your insurer or broker.
How far ahead should we book?
Earlier is better, particularly for night and weekend visits. We usually quote within one working day, and emergencies are covered by our 24/7 line.
Why survey before a clean?
A survey finds out how the system is laid out, how dirty it is and what can be reached, before anyone starts cleaning. Missing access panels are noted ahead of the clean.
Grease, kitchens and Walmer
The coast is only about 1 mile from Walmer. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The Food Standards Agency lists about 28 pubs and bars as registered food businesses in Walmer and the streets around it, up to about 1.5 miles out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Environmental health officers from Dover council inspect food businesses in Walmer. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Historic houses near Walmer, such as Walmer Castle about 0.3 miles south-east, are a reminder that older buildings with event kitchens can have long, awkward duct routes. If you run a café or takeaway near Walmer station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits.
Walmer is about 6 miles north-east of Dover, in Kent. Walmer gets the same approach as every site we work on: a survey first, a fixed quote, work timed around your hours and a report with photos. Our area takes in 922 places across Kent, large and small. Our Maidstone page covers sites nearby, about 38 miles away.
Every address in CT14 is covered for TR19 inspection, from the main roads to the quietest streets. Whether your site is on Lawn Road, York Road and Grams Road or anywhere close by, our technicians can take on the work. With the A258 close by, Walmer is simple for us to get to for TR19 inspection. Neighbouring places we cover for TR19 inspection include Deal (1 mile north), Mill Hill (1 mile north-west), Great Mongeham (2 miles north-west), Sholden (2 miles north-west) and Ripple (2 miles west). We also work in nearby towns such as Canterbury (15 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
Local landmarks in Walmer
Around Walmer, our work takes us to kitchens and buildings near Goodwin Academy and The Telegraph pub, among other places. The closest station to Walmer is Walmer station, roughly 0.7 miles west. Nearby you will also find Kent Museum of the Moving Image (1.4 miles north) and Walmer Castle (within half a mile south-east).
Do you need TR19 inspection in Walmer?
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. The old cleaning schedule may not match the kitchen any more.
If you notice any of these, it’s worth a diagnosis:
- Ductwork where grease may be over the TR19 limits
- Sections of duct that cannot be reached
- Insurers asking for TR19 evidence
- Checking the result of a recent clean
If you run a church or community hall kitchen, near St Mary's Church or elsewhere in Walmer, its extract still collects grease from every lunch and event.
Comparing quotes
- When the next visit should be, and why
- Proof of accreditation you can verify
- Whether VAT is included
- What happens if part of the system can’t be accessed