Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Mill Hill, Kent
For TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Mill Hill, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Kitchens whose menu or hours have changed
- Systems cleaned on a calendar with no measurements
- An insurer’s request for a TR19 audit
Your questions about TR19 inspection in Mill Hill
Does the sea air around Mill Hill make a difference to TR19 inspection?
It can, as Mill Hill is within about 2 miles of the sea, where salt in the air is hard on metal. A fan housing that is rusting near the coast can fail sooner, so it’s worth catching early.
Which environmental health team covers Mill Hill?
Food hygiene inspections in Mill Hill are carried out by Dover council. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Can you verify a clean after it’s been done?
We visit after a clean, take readings at set points and photograph the system. Any areas that weren’t cleaned properly are flagged.
How much notice should we give?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
What do you do with what you remove?
It leaves the site with us at the end of the visit. During the work, it’s contained so the area stays clean.
What happens if you can’t reach some of it?
The report shows them clearly. In ductwork, new access panels are often the answer, which we can install.
How often should grease be tested?
Each report recommends when to test and clean next, taking the readings and the kitchen’s hours into account. The interval should come from a competent person’s risk assessment backed by grease measurement.
What grease levels does TR19 allow?
TR19® Grease says the mean shouldn’t exceed 200 microns between cleans, and anywhere at 500 microns or more needs spot cleaning right away.
About our TR19 inspection in Mill Hill
After a clean, post-clean verification checks the result, with new readings and photos of the cleaned areas. It shows whether the system was left in the condition the paperwork describes. If you have missing TR19 certificates or history and ductwork where grease may be over the TR19 limits, we can help.
Size does not change the work: a kitchen in a place like Mill Hill gets the whole system cleaned, canopy to discharge. We plan the visit around your hours, with the journey sorted in advance.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Mill Hill (CT14)
- Region
- Kent
- Records
- Certificate and photo report
- Quote
- A fixed quote up front
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Different parts, different methods
Vertical risers
Risers can be hard to get into. The survey shows exactly what access there is.
Restaurants, pubs and hotels
Heavy use under BESA guidance, 12 to 16 hours a day, means a clean at least every 3 months, and readings show whether that is enough.
What happens on the day
Your staff do not need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. In a smaller place like Mill Hill, parking is rarely the issue, but tell us about gates, roof access and opening hours.
- First we look at the system’s cleaning history, if there is one.
- The layout is traced from the canopy to the discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Preparing for the visit
- Let us know when the site is closed or quiet
- Tell us where we can park and unload
- Find the previous report, if there is one
Ask for a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
Read more
Places near Mill Hill
What else we do in Mill Hill
Landlords, agents and facilities managers
For anyone managing more than one site, we can schedule visits across all of them on one quote. Each site gets its own report and pictures, so records stay tidy.
Facilities teams in offices, schools and healthcare sites book us too in Mill Hill and across Kent. Larger estates can be phased building by building around the people who use them.
Do you need TR19 inspection in Mill Hill?
TR19® is the benchmark that insurers, fire officers and EHOs refer to. It is not legislation; the legal duty comes from the Fire Safety Order 2005, under which the responsible person must reduce fire risk, and in a kitchen that means keeping grease under control.
Signs it’s time to call us include:
- Post-clean verification after another contractor’s clean
- Pre-clean surveys before a first TR19 clean
- Insurers asking for TR19 evidence
- Systems cleaned on a calendar with no measurements
For schools such as St Mary's Catholic Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
Comparing quotes
- When the next visit should be, and why
- Whether the work can be done while the site is closed
- What happens if part of the system can’t be accessed
- Exactly which parts of the system are covered
When something else is needed
Before you book, it helps to know what’s not included:
- The legal duty, which stays with the responsible person
- Fan breakdowns, which need a repair visit
- The grease itself, which needs a full or spot clean
If in doubt, ring 0345 646 2711 or use the quote form and we’ll say what we think before booking.
Where we work
- Access surveys
- Wet film thickness tests
- Post-clean checks
- Pre-clean surveys
- Insurer audits
- Deposit thickness tests
What staff can safely do
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
TR19 inspection in Mill Hill: the local picture
At about 2 miles from the coast, Mill Hill is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The FSA’s data shows about 21 pubs, bars and clubs and about 4 hotels, B&Bs and guest houses registered in and around Mill Hill, up to about a mile and a half out. Breakfasts, bar meals and functions all put grease into the extract wherever they’re cooked. Mill Hill sits within the area of Kent Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
If your kitchen is in a listed or historic building, like the houses around Mill Hill (Walmer Castle is about 1.4 miles south-east), fitting access panels needs care. Where a hall near St Richard, or anywhere in Mill Hill, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Mill Hill is about 1 mile west of Deal, in Kent. Every kind of commercial site in Mill Hill, we can take on TR19 inspection. Visits can be booked for evenings, overnight or weekends so trading is not interrupted. Mill Hill is one of 922 towns, villages and districts in Kent where we work for TR19 inspection. There’s also a page for Maidstone, roughly 37 miles from Mill Hill.
We cover every part of CT14 for TR19 inspection and the roads nearby. We cover sites on Mary Road, Glack Road and Lydia Road and the roads around them. If your site is just outside Mill Hill, we cover Great Mongeham (1 mile west), Deal (1 mile east), Sholden (1 mile north), Sholden Meadows (1 mile north) and Walmer (1 mile south-east). Within a short drive, we also cover Canterbury (14 miles west), Margate (12 miles north), Dover (6 miles south-west), Folkestone (13 miles south-west), Ramsgate (9 miles north) and Broadstairs (11 miles north).
What’s near Mill Hill
In Mill Hill, that means kitchens and buildings near The Mill Inn, Goodwin Academy and Betteshanger Park. For rail, the closest station is Walmer station, about 0.7 miles south-east of the centre. Other landmarks nearby include Kent Museum of the Moving Image (1.3 miles north-east) and Deal Castle (1.3 miles east).
Leave it or put it right?
Skipping grease testing leaves the cleaning interval to guesswork. Any reading of 500 microns or more needs immediate spot cleaning under TR19® Grease, which you won’t know without measuring. It’s better to plan the work at a site near Mill Hill than wait for a failure.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. You’ll have a fixed price before any work starts.
Why Mill Hill businesses choose us
- One number for every site across the South East and London
- Full insurance on every job
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- A fixed price before any work starts
Read what affects the cost or our accreditations.