Greater London · TR19 inspections and grease testing
TR19 inspections in Millwall
We cover Millwall for TR19 inspections and grease testing. Fixed quotes, work around your opening hours and photo reports as standard.
- Surveys needed before quoting a full clean
- An insurer’s request for a TR19 audit
- Systems cleaned on a calendar with no measurements
Looking after it afterwards
How long the results last depends on use and care. Here’s what we suggest:
- Look out for grease drips round the canopy edge
- Never cook with filters missing
- Clean grease off the canopy between professional cleans
- Keep to the recommended interval
Where sections couldn’t be reached, the report says where access panels would help. Fitting them before the next clean means the whole system gets done.
Keep filters clean and in place. Gaps around filters let grease get past them.
About our TR19 inspection in Millwall
BESA’s minimum cleaning frequencies depend on how long the kitchen cooks each day: every 3 months for heavy use of 12 to 16 hours a day, every 6 months for moderate use of 6 to 12 hours, and every 12 months for light use of 2 to 6 hours. Those are minimums, and grease readings help set the real interval. The work covers wet film thickness tests, insurer audits and pre-clean surveys, and people most often call us about uncertainty over how often to clean and an insurer’s request for a TR19 audit.
In a London area like Millwall, a kitchen extract often passes through shared space on its way out: a riser, a service void, the floors above. Grease in a duct like that is a fire risk to the whole building, not just the kitchen, which is why keeping it clean to TR19® matters.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Millwall (E14, SE8, SE10)
- Wider area
- Greater London
- Paperwork
- Certificate plus before-and-after photos
- Quotes
- A fixed price before we start
- Hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Leave it or put it right?
Sites in Millwall that have never measured grease cannot tell whether their cleaning interval suits the kitchen. Measured readings let a competent person set the interval. Every month a London system goes without attention adds to what has to be done later.
Leaving it longer rarely makes the work cheaper. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you are unsure, call us on 0345 646 2711, or email photos for straight advice and a fixed quote.
What you get with us
- Accredited under CHAS and SafeContractor, with ISO 9001
- Survey first, then a fixed quote
- A fixed price before any work starts
- We’re fully insured
Do you need TR19 inspection in Millwall?
Looking at a canopy tells you little about what’s in the duct. Clean filters can hide a heavy layer behind them, which is why readings matter.
These are the problems we see most often:
- Heavy grease suspected in the plenum or ducts
- Sections of duct that cannot be reached
- Insurance renewals needing proof of TR19 cleaning
- Pre-clean surveys before a first TR19 clean
A hall kitchen that only cooks for events, whether near Church of St Nicholas or elsewhere in Millwall, still needs its extract cleaned, just less often.
What to look for in a quote
- What’s included in the scope, part by part
- What hours they’ll be on site
- Which accreditations they hold, and whether you can check them
- How they set the interval to the next visit
How it works
We work around your opening hours, not the other way round. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes a couple of hours for a typical kitchen extract system. In Millwall, as across London, we normally work overnight or at weekends and hand the site back ready to open.
- The visit is arranged for when the kitchen is not busy.
- The system is checked from canopy to discharge.
- Grease readings are taken at set points using WFTT or DTT.
- We photograph the test points and record any sections we cannot reach.
- You get a report with readings, pictures and recommendations.
Before we arrive
- Plan for cooking equipment or plant to be off before we arrive
- Arrange a key holder or contact on site
- Tell us where we can park and unload
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
Read more
When something else is needed
We’d rather tell you now than book work that will not help, so these are the things it won’t cover:
- A faulty or failing extract fan
- Installation problems, which fall under design guidance such as DW172
- Parts of the duct nobody can reach yet
If you are not sure, just call us on 0345 646 2711 or drop us a line and we will give you a straight answer.
What the work covers
- Deposit thickness tests
- Pre-clean surveys
- Post-clean checks
- Access surveys
- Insurer audits
- Wet film thickness tests
FAQs for Millwall
Does London parking affect a job in Millwall?
Parking and loading in London need planning, so tell us about bays, permits and building rules when you book. Much of our London work is done overnight, which helps.
Which fire and rescue service is responsible for Millwall?
That is London Fire Brigade. A recent cleaning certificate and a note of the next clean date show that grease in the extract is being managed.
How much notice should we give?
It depends on the time you need and how big the job is. Mention your preferred dates with your enquiry, and for anything urgent, ring our 24/7 emergency line.
How do you keep the site clean during the work?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
What does TR19 inspection cost?
There’s no set price, as it depends on the job: how big it is, what state it’s in, how we reach it and the working hours. You get a fixed price before we start.
Can the work be done while we’re closed?
Yes, and that is how we prefer to work. The visit is timed for when the area is not in use, such as late evening, overnight or a weekend.
What does TR19 mean?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Millwall kitchens: local notes
According to Food Standards Agency records, there are about 85 pubs, bars and clubs and about 15 hotels and B&Bs across Millwall and its immediate surroundings (about a mile and a half). Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. It’s Tower Hamlets council that sends environmental health officers to food businesses in Millwall. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Before-and-after pictures from each clean are a simple way to show the extract is in hand. London Fire Brigade covers Millwall. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk.
If you run catering at a healthcare site, such as a hospital like Miller General Hospital about 0.9 miles south, the extract may need cleaning more often than a part-time kitchen. Term dates shape school work: for a school like Harbinger Primary School, an extract clean fits neatly into a half-term or summer break.
Millwall is about 1 mile north-west of Greenwich, in Greater London. Whether your site is in the middle of Millwall or further out, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Millwall is one of 764 towns, villages and districts in Greater London we cover for commercial clients.
Our technicians cover all of E14, SE8 and SE10 for TR19 inspection and the roads nearby. You’ll find streets such as Creek Road, Wynan Road and Undine Road, and we cover them all for TR19 inspection. Close by, we work in North Greenwich (1 mile east), Isle of Dogs (1 mile east), Deptford (1 mile south), Cubitt Town (1 mile north-east) and Greenwich (1 mile south-east). Within a short drive, we also cover London (3 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles north-west) and Shoreditch (4 miles north-west).
What’s near Millwall
Around Millwall, our work takes us to kitchens and buildings near Canary Wharf College 3, St. Paul's and Mudchute Park and Farm and the streets around them. Nearby too are The Ferry House Public House (within half a mile south-east) and Laban Centre (0.6 miles south). The nearest railway station is Deptford station, roughly 0.8 miles south-west. Well-known places in the area include Surrey Quays Shopping Centre (1.2 miles west) and Old Royal Naval College (0.7 miles south-east). For a walk, there’s Tower Hill and Sue Godfrey Nature Park.
Part by part
Horizontal duct runs
If a run has no access panel, we note it so panels can be added.
Vertical risers
Access to risers is often limited. The survey shows exactly what access there is.
Towns and villages near Millwall
What else we do in Millwall
What affects the quote in Millwall
Every site gets its own quote. This is what makes a difference:
- The scale of the work
- The condition we find in the survey
- Whether it’s a one-off visit or part of a schedule
- When the work can happen, such as evenings, overnight or weekends
What you pay reflects the actual work. That’s why we survey first, from photos or on site, and the price is agreed before work begins.
Asking for a quote
We can often survey from photos. Try to include:
- Your last certificate, test record or report
- Close-ups of filters, grilles, hatches or access panels
- Photos showing the whole system and its surroundings
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.