Greater London · TR19 inspections and grease testing
TR19 inspections and grease testing in Millbank, Greater London
TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Millbank, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Insurers asking for TR19 evidence
- Sites with gaps in their extract records
- Missing access panels found on survey
Staff cleaning versus specialist work
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
TR19 inspection for kitchens and businesses in Millbank
Taking on a kitchen in Millbank with no cleaning records? Start with an inspection. You get readings, pictures and a clear view of what’s needed, before any cleaning is booked. The work covers wet film thickness tests, post-clean checks and deposit thickness tests, and the jobs we see most are missing access panels found on survey and insurers asking for TR19 evidence.
In a London area like Millbank, a kitchen extract often passes through shared space on its way out: a riser, a service void, the floors above. Grease in a duct like that is a fire risk to the whole building, not just the kitchen, which is why keeping it clean to TR19® matters.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Millbank (SW1P, W1J, SW1V)
- Region
- Greater London
- Records
- Certificate and photo report
- Quote
- Fixed quote, usually within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Towns and villages near Millbank
Also in Millbank
What TR19 inspection looks like in Millbank
Look up Millbank on the FSA’s food hygiene register and you’ll find about 3,298 restaurants, cafés and canteens and about 440 takeaways in Millbank and the streets around it, up to about 1.5 miles out. Kitchens like these cook for very different hours, and grease testing shows which extracts need cleaning soonest. London jobs typically start after the last service, with loading and roof access agreed with the building first. Millbank is covered by London Fire Brigade. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
Church and community hall kitchens, near Christ Church or anywhere around Millbank, are easy to forget, but their extracts collect grease like any other. Commuter trade near London Victoria station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands.
Millbank is about 1 mile south-east of City of Westminster, in Greater London. Whatever kind of site you run in Millbank, TR19 inspection is something we can help with. We can work out of hours so trading is not interrupted. We cover 764 places across Greater London, from busy centres to quieter spots.
TR19 inspection in SW1P, W1J and SW1V is surveyed, quoted and booked the same way as anywhere else. If you need TR19 inspection at premises on Eaton Lane, Wilton Road and Castle Lane or a nearby road, we can help. You will find Millbank on the A4 and A202, so it’s easy for us to get to for TR19 inspection. If your site is just outside Millbank, we cover Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). Further out, we also cover Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Near you in Millbank
Typical jobs here are in premises near Blewcoat School, St Matthew's School and London Library and the streets around them. Also close by are St James's Park (within half a mile north) and Grafton Arms (under half a mile south). The nearest railway station is London Victoria station, about 0.6 miles south-west of the centre. Nearby you’ll also find Westminster Hospital (under half a mile east) and Kingly Court (0.9 miles north). The countryside around Millbank includes St. James's Park Lake and Ludgate Hill.
What affects the quote in Millbank
A fixed price needs a few facts first. We look at:
- One-off work versus a regular cycle
- Where the site is and how we reach it
- The times the site is available
- The number of sites or systems
What you pay reflects the actual work. That is why every job is surveyed first, and why the quote is fixed before we start.
What to send for a quote
To help us quote quickly, please include:
- The roof, plant room or outside wall the system runs to
- The paperwork from the last visit, if you have it
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The times we could work without disrupting the site
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, call us on 0345 646 2711 or send us an email.
Your questions about TR19 inspection in Millbank
Who carries out food hygiene inspections in Millbank?
The local authority for Millbank is Westminster council, and its environmental health team does the inspecting. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Is parking a problem for work in Millbank?
We plan it in advance, so let us know about loading bays, permits and access rules at the building. If the building has a loading slot system, we will book into it.
How do you protect the area?
By covering it before any work starts. The work is kept contained and leave the area clean.
What happens on a pre-clean survey?
We look at the system from canopy to discharge, take grease readings and check access. From it, we plan the clean and quote a fixed price.
Can you set up regular visits?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
How much does TR19 inspection cost?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before we start.
When should we have our next grease test?
Each report recommends when to test and clean next, taking the readings and the kitchen’s hours into account. The interval should come from a competent person’s risk assessment backed by grease measurement.
What do the grease readings need to be?
The TR19® Grease figures are a mean of 200 microns or less between cleans, and immediate spot cleaning wherever a reading hits 500 microns. We show your readings against those figures.
How it works
We’re used to working while the site is closed. Evenings, nights and weekends are when much of our work happens, so a kitchen or building can carry on as usual the next day. The visit itself takes a couple of hours for a typical kitchen extract system. For a job in Millbank, tell us about loading bays, permits, lifts and roof access when you book.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- Access panels are located and any missing ones noted.
- Grease readings are taken and photos recorded.
- We report back with readings and a fixed quote.
Before we arrive
- Tell us the best time to work, such as after service or at a weekend
- Clear the space around the work
- Allow time for equipment near the work to be turned off and cool down
Get a fixed quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in pictures, get a survey first. Either way, you get a fixed price before work begins.
Related advice
When to call us in Millbank
Menus, opening hours and cooking styles change over time, and more frying or longer hours mean more grease. The old cleaning schedule may not match the kitchen any more.
Common reasons sites call us are:
- Sections of duct that can’t be reached
- Sites with gaps in their extract records
- Systems that need surveying before cleaning
- Insurance renewals needing proof of TR19 cleaning
For schools such as Harris Westminster Sixth Form, kitchen extract cleaning is normally booked for the holidays, when the canteen is closed.
What your quote should include
- What records you will receive afterwards
- Whether inaccessible sections are listed on the report
- If the quote is a fixed price or an estimate
- Whether they’re fully insured
What the work involves, part by part
Canopy and plenum
The plenum behind the filters can carry a lot of grease. Readings and photos are taken in the plenum on every inspection.
Horizontal duct runs
Grease settles on the floor of horizontal ducts as the air cools. We test at points along the run through access panels.
Honest limits
In fairness, some problems need a different fix:
- Removing the grease, which is a separate clean
- The legal duty, which stays with the responsible person
- A faulty or failing extract fan
If in doubt, ring 0345 646 2711 or email us and we will say what we think.
Parts of the system we cover
- Post-clean checks
- Pre-clean surveys
- Insurer audits
- Access surveys
- Deposit thickness tests
- Wet film thickness tests
For landlords and multi-site operators
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Running several sites is easier with one contractor. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.