Kent · TR19 inspections and grease testing
TR19 Inspection in Fir Toll
TR19 inspection in Fir Toll from ventilation hygiene specialists trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Surveys needed before quoting a full clean
- Uncertainty over how often to clean
- Post-clean verification after another contractor’s clean
Why deal with it now?
Surveying first means the clean goes to plan. Missing access panels, hidden duct runs and awkward fans are found before the cleaners arrive, so the clean covers the whole system. In a place like Fir Toll, ductwork and fans are easy to forget until something goes wrong.
Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
What you get with us
- Accredited under CHAS and SafeContractor, with ISO 9001
- A written report with photos after every visit
- One contact for all your sites in London and the South East
- Fixed quotes from a survey or photos
Read our cost guide or how to check a contractor.
TR19 inspection for kitchens and businesses in Fir Toll
Think of a TR19 inspection as the diagnosis before the treatment. Readings, photos and notes on access are gathered from end to end, so the clean can be planned properly. Common call-outs are for missing access panels found on survey and heavy grease suspected in the plenum or ducts, on wet film thickness tests, access surveys and pre-clean surveys.
Work in a small place like Fir Toll starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
The sign-off is always in writing: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Fir Toll (TN27)
- Wider area
- Kent
- Reporting
- Certificate plus before-and-after pictures
- Quotes
- A fixed price before we start
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Part by part
Extract fan and discharge
We look at where the extract discharges outside, as grease can build up there too.
Canopy and plenum
Clean-looking filters do not mean a clean plenum. That’s why we test behind them.
What TR19 inspection looks like in Fir Toll
The Food Standards Agency lists about 4 pubs, bars and clubs as registered food businesses within 1.5 miles or so of the middle of Fir Toll. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. The fire and rescue service for Fir Toll is Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises. Environmental health officers from Ashford council inspect food businesses in Fir Toll. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Our report lists what was cleaned and when, which is useful to have ready.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Godinton House is about 3.6 miles east), access may need planning. Bursars and site managers at schools such as Pluckley Church of England Primary School tend to book extract cleaning for when the kitchen is empty. If you cook for passing trade around Pluckley station, the extract can be cleaned between your last and first customer.
Fir Toll is about 5 miles west of Ashford, in Kent. Across the TN27 area, we can carry out TR19 inspection at your premises. 922 places in Kent are on our list, from busy centres to quieter spots. There’s also a page for Maidstone, roughly 12 miles from Fir Toll.
Here we cover the TN27 postcode area for TR19 inspection. If your site is just outside Fir Toll, we cover Pluckley Thorne (1 mile north-west), Pluckley (1 mile north), Chambers' Green (1 mile south), Little Chart (2 miles north-east) and Mundy Bois (2 miles north-west). We also work in nearby towns such as Maidstone (12 miles north-west), Ashford (5 miles east), Sittingbourne (12 miles north), Faversham (12 miles north-east), Davington (12 miles north-east) and Foley Park (12 miles north-west).
Around Fir Toll
We work in commercial kitchens and buildings around The Black Horse Inn and the streets around them. The closest station to Fir Toll is Pluckley station, roughly 0.8 miles south. Well-known places in the area include Romden Castle (2.3 miles south-west).
Nearby places to Fir Toll
Other services in Fir Toll
FAQs for Fir Toll
Who would carry out a food hygiene inspection at a kitchen in Fir Toll?
The local authority for Fir Toll is Ashford council, and its environmental health team does the inspecting. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Do you cover smaller places like Fir Toll?
Yes, we work in villages as well as towns, and Fir Toll is covered. Let us know about access, parking and anything unusual about getting there when you book.
Can you set up regular visits?
Yes, of course. Tell us what you have and how it’s used, and we’ll suggest a schedule and quote for it.
Where does the waste go?
It leaves the site with us when we go. During the work, it’s contained to keep the area clean.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Do you offer emergency callouts?
Yes. Our emergency line runs 24/7, for problems that can’t wait. Ring any time and tell us what’s happened.
Can you price the work without visiting?
In many cases, yes. Photos of the system and the access, plus your opening hours and last report, are often enough. Larger or hidden systems need a survey on site first.
How much notice should we give?
That depends on the slot you want and the size of the job. Tell us your preferred dates when you ask for a quote, and if it’s an emergency, call us any time.
For landlords and multi-site operators
Keeping records across a portfolio is half the battle. Every visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
When the building owner and the occupier are different, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
When it’s something else
We’d rather tell you now than book work that won’t help, so here are the limits:
- Fire safety duties beyond the extract system
- Ductwork that was designed or installed badly
- Fan breakdowns, which need a repair visit
If in doubt, call 0345 646 2711 or email us and we will say what we think.
Where we work
- Post-clean checks
- Deposit thickness tests
- Pre-clean surveys
- Wet film thickness tests
- Insurer audits
- Access surveys
What affects the cost of TR19 inspection
The price is fixed before any work begins. It’s based on:
- What state the system is in
- The size of the system
- Site rules, permits and inductions
- One-off work versus a regular cycle
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, and a neglected system can mean more work. If you’re not sure what’s needed, call us on 0345 646 2711 or email us and we’ll give you an honest view and a fixed quote.
Helping us quote
To help us quote quickly, please include:
- Your opening hours and when the area is out of use
- Any access panels or hatches you can see
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- The postcode and the type of business
To get a fixed quote, give us a ring on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will usually have a quote within one working day.
Between visits
A little care between visits keeps the system in better shape. We recommend:
- Keep to the recommended interval
- Tell us if menus or opening hours change
- Clean or swap grease filters as often as the kitchen needs
- Do not box in or cover duct access panels
Readings of 500 microns or more are highlighted as needing immediate spot cleaning, and we can quote to do it.
Revisit the cleaning interval whenever the menu or hours change. Fresh readings show whether it needs to change.
How it works
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. Pictures of the system and its access let us plan the work in Fir Toll before we set off.
- We go through any past certificates and reports.
- We follow the extract from canopy to discharge.
- Access panels are located and any missing ones noted.
- Grease readings are taken and pictures recorded.
- You get a report and a fixed quote for the clean.
How to prepare
- Plan for cooking equipment or plant to be off before we arrive
- Arrange a key holder or contact on site
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Ask for a quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.