Kent · TR19 inspections and grease testing
TR19 inspections in Bekesbourne Hill
TR19 inspection for Bekesbourne Hill, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Insurers asking for TR19 evidence
- Checking the result of a recent clean
- Uncertainty over how often to clean
How the visit works
There are three stages on the day: set-up, the treatment itself and the sign-off. Set-up means sheeting and making equipment safe, while signing off means the written report and pictures. The middle part takes longest, and that takes a couple of hours for a typical kitchen extract system. Photos of the system and how to reach it help us plan a visit to Bekesbourne Hill.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- We repeat the WFTT or DTT readings.
- Photos are taken to show the condition after the clean.
- The results are reported, with anything missed flagged.
Getting ready for the visit
- Let us know about permits to work or site inductions
- Allow time for equipment near the work to be turned off and cool down
- Arrange a key holder or contact on site
How to get a quote
Here’s what helps us quote: where the site is, what it is and its opening hours, pictures of the system and the last certificate or report, if there is one. Once you have those, phone us on 0345 646 2711 or use the quote form.
Related advice
TR19 inspection in Bekesbourne Hill, done properly
A grease test measures how thick the grease is inside a kitchen extract system. We use the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT), taking readings at set points. From the numbers, you can see whether cleaning is due. If you’re dealing with extracts that have never been grease tested and post-clean verification after another contractor’s clean, we can help, from post-clean checks, insurer audits and access surveys onwards.
Somewhere as small as Bekesbourne Hill, commercial kitchens are few: perhaps a pub, a school or care home kitchen, or a hall used for events. Each still has a canopy and duct that collect grease.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Bekesbourne Hill (CT4)
- Wider area
- Kent
- Paperwork
- Certificate plus before-and-after photos
- Price
- Fixed quote, usually within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Why act early in Bekesbourne Hill
Surveying first means the clean goes to plan. Missing access panels, hidden duct runs and awkward fans are found before the cleaners arrive, so the clean covers the whole system. A fault that closes a site in a village like Bekesbourne Hill affects everyone who depends on it.
What you pay reflects the actual work. That’s why we survey first, from pictures or on site, and the price is agreed before work begins.
Why us?
- Full insurance on every job
- Every job surveyed first
- One number for every site across the South East and London
- In business since 2009
Read what affects the cost and our accreditations.
Different parts, different methods
Extract fan and discharge
We look at where the extract discharges outside, since grease reaches the very end of the system.
Canopy and plenum
We look over the canopy, inside and out, with readings where grease collects.
TR19 inspection in Bekesbourne Hill: the local picture
Food Standards Agency records list about 6 restaurants, cafés and works canteens and about 4 takeaways within 1.5 miles or so of the middle of Bekesbourne Hill. Kitchens like these cook for very different hours, and grease testing shows which extracts need cleaning soonest. In Bekesbourne Hill, food businesses are inspected by environmental health officers from Canterbury City council. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready. Bekesbourne Hill sits within the area of Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you run catering at a healthcare site, such as a hospital like St Martins Hospital about 1.6 miles north-west, the extract may need cleaning more often than a part-time kitchen. Church and community hall kitchens, near Church of St Peter or anywhere around Bekesbourne Hill, are easy to forget, but their extracts collect grease like any other.
Bekesbourne Hill is about 3 miles south-east of Canterbury, in Kent. Wherever you are in the CT4 postcode area, we cover TR19 inspection for commercial sites. Bekesbourne Hill is one of 922 towns, villages and districts in Kent we cover for commercial clients. You can also see our page for Maidstone, about 26 miles away.
TR19 inspection in CT4 follows the same survey, fixed quote and written report as everywhere else we cover. TR19 inspection is available to premises on Bekesbourne Hill and Oakleigh Lane and the roads around them. We also cover Patrixbourne (1 mile south), Bekesbourne (1 mile south-east), Bridge (1 mile south-west), Littlebourne (2 miles north-east) and Bishopsbourne (2 miles south). Further out, we also cover Ashford (14 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (11 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
Around Bekesbourne Hill
Locally, jobs take us to businesses close to Chequer's Wood and Old Park and St. Anselm's Catholic School and the streets around them. There’s a railway station in Bekesbourne Hill itself: Bekesbourne station. A little further out are Canterbury Roman Museum (2.6 miles north-west) and St Martins Hospital (1.6 miles north-west). Open spaces near Bekesbourne Hill include Blean Woods RSPB Reserve.
Looking after it afterwards
Looking after the system between visits is straightforward, and it makes the next visit easier:
- Keep grease filters clean and fitted properly
- Book the next test on the date in the report
- Keep TR19 certificates, readings and reports together
- Share inspection reports with your insurer or broker when asked
After post-clean verification, file the results with the cleaning certificate. Together they show the system was cleaned and checked.
Close the access gaps found during inspection, so every part of the duct can be cleaned.
What your team can do, and what needs us
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and give you a fixed quote.
A few tasks are always specialist work: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
Also near Bekesbourne Hill
More services for Bekesbourne Hill
Questions from Bekesbourne Hill
Do you work overnight in Bekesbourne Hill?
Yes, evening, overnight and weekend work is normal for us. That way a site in Bekesbourne Hill doesn’t have to lose a day’s trading. When you phone us on 0345 646 2711 or drop us a line, mention when the site is quiet.
Which fire authority looks after Bekesbourne Hill?
Kent Fire and Rescue Service is the fire and rescue service for Bekesbourne Hill. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
How do you protect the area?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
How much notice do you need?
The more notice, the better, especially for out-of-hours work. We usually quote within one working day, and there’s a 24/7 line for emergencies.
How do you measure grease in a kitchen extract?
Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. The results are given in microns.
What should I send you?
Some photos and a quick description of the system plus the address and your hours. If we need more, we’ll ask.
Do we have to follow TR19 by law?
No, TR19® isn’t legislation. But the responsible person must assess and reduce fire risk under the Fire Safety Order 2005, which in a kitchen includes grease in the extract. Many insurance policies also require TR19 adherence.
Is there a survey before the work?
Yes. We always survey first, from your pictures and details, or with a visit where needed. A fixed quote follows.
When to call us in Bekesbourne Hill
As hot, greasy air travels up the duct, it cools and leaves a film behind. The thickest layers can sit out of sight in the plenum, at bends and along flat runs.
It’s time to book a visit if you see:
- Checking the result of a recent clean
- Systems that need surveying before cleaning
- Missing TR19 certificates or history
- An insurer’s request for a TR19 audit
Commuter trade near Bekesbourne station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands.
What to look for in a quote
- How they set the interval to the next visit
- Whether the price is fixed
- What’s included in the scope, part by part
- If they look at the system before pricing
Multi-site and managed buildings
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we are happy to quote for all of it.