Kent · Air handling unit cleaning
Sevenscore AHU cleaning
AHU cleaning for Sevenscore, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Plant that needs cleaning after a refit
- Air handling units with blocked filters
- Coils clogged with dust and debris
Your questions about AHU cleaning in Sevenscore
Can you do AHU cleaning in Sevenscore?
Yes, Sevenscore is within the area we cover across London and the South East. To start, call us on 0345 646 2711 or send us an email with a few photos of the system.
Can the work in Sevenscore be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Sevenscore can fit around your hours. Tell us your opening hours when you ask for a quote.
Will the ventilation be off while you clean?
Yes. The fan must be stopped and the unit isolated, and we time the work to suit the site.
Do you give a certificate after the clean?
Yes, both a certificate and a report with photos. The report also suggests when the unit should next be inspected.
What’s included in an AHU clean?
Everything inside the unit that air passes over, from the intake and filters through the coils and fan to the outlet. The photo report shows each section before and after.
What information do you need?
The site address, the type of premises and your opening hours, plus pictures of the system and your last certificate or report if you have one.
Do you look at the system first?
Yes. Photos often do the job, while bigger or harder-to-see systems are surveyed on site.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
How we handle AHU cleaning in Sevenscore
Every supply and extract system relies on the air handling unit at its centre: air is pulled in, filtered, conditioned and sent out through the ducts. Anything that collects inside the unit can end up in the rooms it serves, so cleaning the unit matters as much as cleaning the ducts. Common call-outs are for dirty fans and fan housings and debris and leaves in the fresh air intake, on dampers and louvres, heating and cooling coils and internal panels.
Rural buildings with mechanical ventilation, such as care homes and country hotels, often keep their units in roof spaces or outbuildings, where filters and drain trays get forgotten.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Location
- Sevenscore (CT12)
- Region
- Kent
- Records
- Written report with pictures
- Price
- A fixed quote up front
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Honest limits
In fairness, there are a few things this work won’t fix:
- Ductwork downstream of the unit, which is a separate clean
- Coils that are corroded or leaking and need replacing
- Faulty motors, drives or bearings
Not sure which it is? You can call us on 0345 646 2711 or use the quote form and we’ll tell you honestly.
Where we work
- Supply and extract fans
- Internal panels
- Filter sections
- Heating and cooling coils
- Dampers and louvres
- Drain trays
AHU cleaning in Sevenscore: local notes
Ramsgate General Hospital is the nearest hospital, about 2.8 miles east of Sevenscore. Hospitals show how much a building can rely on its ventilation, and smaller healthcare sites rely on theirs too.
Ramsgate General Hospital, about 2.8 miles east, is the nearest hospital to Sevenscore, and healthcare sites of every size need their supply air kept clean. If you manage offices or shops near Thanet Parkway station, their ventilation can be inspected and cleaned out of hours.
Sevenscore is about 3 miles west of Ramsgate, in Kent. Sites in Sevenscore get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with photos. Sevenscore is one of 922 towns, villages and districts in Kent where we work for commercial clients. We also work in Maidstone, about 36 miles from Sevenscore.
AHU cleaning in CT12 is surveyed, quoted and booked the same way as anywhere else. Neighbouring places we cover for AHU cleaning include Cliffs End (1 mile east), Way (1 mile north-west), Ebbsfleet (1 mile south), Richborough Port (2 miles south) and Manston (2 miles north-east). Within a short drive, we also cover Canterbury (12 miles west), Margate (4 miles north-east), Dover (13 miles south), Ramsgate (3 miles east), Broadstairs (4 miles north-east) and Whitstable (14 miles west).
What’s near Sevenscore
Locally, jobs take us to businesses close to The Sportsman pub and Sandwich and Pegwell Bay. The nearest railway station is Thanet Parkway station, roughly 0.7 miles east. Other landmarks nearby include Westwood Cross (3 miles north-east) and Ramsgate General Hospital (2.8 miles east). Green spaces nearby include Sandwich and Pegwell Bay.
Towns and villages near Sevenscore
What else we do in Sevenscore
What staff can safely do
If your staff spot something between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Different parts, different methods
Internal casing and panels
Access doors and panels are opened in turn and closed properly afterwards, and check every one is shut.
Fans and fan sections
Build-up on fan blades can upset the balance and add wear. A clean fan runs more smoothly.
Why deal with it now?
Tenants, auditors and owners may want proof that the air handling plant is kept clean. A TR19® certificate and photo report give you that, for audits, tenants or your own peace of mind. Systems in rural buildings are often out of sight and out of mind.
The cost depends on how big the system is, the condition it’s in and access to every part of it. We give you a fixed price before work begins, so you know where you stand.
Why book with us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Every job surveyed first
- A single point of contact for sites across the South East and London
- We’re fully insured
See what affects the cost and our accreditations.
Keeping the system healthy
Simple habits between visits make a real difference. We recommend:
- Keep the certificate and photo report with the plant records
- Report musty smells from the vents right away
- Report stiff or damaged access doors
- Book the next check in line with the report
Keep filter changes on schedule between cleans, because good filters protect everything downstream. Record each change in the maintenance log.
Do not let leaves, litter or stored materials build up near the fresh air intake. Anything around the intake is likely to be drawn in.
Landlords, agents and facilities managers
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
Facilities teams in offices, schools and healthcare sites book us too in Sevenscore and across Kent. Work can be phased by floor, building or site to keep disruption down.
How the visit works
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes anything from half a day for one small unit to several shifts for a plant room full of them. If you can send photos, we can arrive in Sevenscore knowing what to expect.
- We look at the unit and the plant area during the survey.
- The area is protected and the unit made safe.
- Each section is cleaned of dust, debris and slime.
- Coils and trays are cleaned and the condensate drain cleared.
- We close every panel, hand the unit back and send the report and certificate.
Preparing for the visit
- Plan for cooking equipment or plant to be off before we arrive
- Arrange a key holder or contact on site
- Clear loose items from the work area
Get a fixed quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.