Hampshire · Fire damper testing
Swanmore fire damper testing
Our technicians work in Swanmore on fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports as standard.
- Fire damper items raised by an assessor
- Motorised smoke dampers due for testing
- Buildings with no damper register
Keeping the system healthy
A little care between visits keeps the system in better shape. Our advice:
- Close off damper faults promptly
- Fix water leaks in plant rooms and risers promptly
- Warn anyone working in ceiling voids about the dampers
- File every damper report where your assessor can find it
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
The simplest way to avoid failures is to test on time, every year. Faults caught early are easier to fix.
Fire damper testing in Swanmore, done properly
For every damper, we record where it is, whether it passed and the state it’s in. Dampers that pass are reset and left open, ready to operate, while failures are flagged with what we found. That record belongs with the building’s fire safety paperwork. The work covers riser dampers, hospitals and care homes and fusible link fire dampers, and common reasons people get in touch are dampers that can’t be reached without an access panel and fire dampers that haven’t been tested for over a year.
A building in a smaller place like Swanmore might have only a few dampers, but each one still needs drop testing at least once a year, with the result recorded.
For insurers and inspectors, the record counts. That’s why every job is written up in a report with photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Where
- Swanmore (SO32)
- Region
- Hampshire
- Records
- Written report with pictures
- Quotes
- Fixed quote, normally within a working day
- Working hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What we do, step by step
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes a morning or an afternoon for a small number of dampers, longer where there are many. Your opening hours decide when we come to Swanmore, not ours.
- First we check the schedule and the last set of results.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Mention any locked doors, roof access or ceiling voids
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before we start.
Related advice
Towns and villages near Swanmore
Also in Swanmore
Multi-site and managed buildings
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
From a single site to a large estate, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
When to call us in Swanmore
Rust is a frequent reason a damper will not close. Condensation, leaks and damp plant rooms corrode the parts that need to move, and the damper can seize quietly where no one sees it.
The symptoms we are asked about most include:
- Rusted damper blades and springs
- Dampers overdue for their annual drop test
- Dampers hidden with no access panel or hatch
- Damper actions from a fire risk assessment
Healthcare buildings such as Knowle Hospital (about 4.3 miles south) rely on fire compartments, and the dampers in them need testing at least annually.
Questions to ask before booking
- Whether they’re fully insured
- Whether the price is fixed
- Whether the quote shows VAT
- What paperwork you get at the end
In-house cleaning or a specialist?
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. That’s our job.
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
What affects the quote in Swanmore
Every site gets its own quote. These are the things that affect it:
- The size of the system
- One-off work versus a regular cycle
- Working hours and out-of-hours timing
- Travel, parking and unloading
The price reflects the work, not guesswork. That’s why we survey first, from pictures or on site, and why the quote is fixed before any work starts.
Asking for a quote
When you call or email, it’s useful to have:
- Any symptoms, from odd noises to smells or leaks
- Any access panels or hatches you can see
- When the site is open and when it’s quiet
- The paperwork from the last visit, if you have it
If you need fire damper testing in Swanmore, phone us on 0345 646 2711, or send details by email. Tell us what kind of premises it is and when it’s open, plus pictures or the previous report if they’re to hand. A fixed quote typically follows within one working day.
Fire dampers in Swanmore buildings
There are about 6 schools, colleges and universities on the FSA’s food hygiene register in Swanmore and the streets around it, up to about 1.5 miles out. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. Knowle Hospital is the nearest hospital, about 4.3 miles south of Swanmore. Where patients or residents may need help to leave a building, working dampers matter all the more. Hampshire and Isle of Wight Fire and Rescue Service covers Swanmore. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
Site managers at schools such as Swanmore Church of England Aided Primary School typically find the summer break the easiest time for ceiling work like damper testing.
Swanmore is about 6 miles east of Hedge End, in Hampshire. We carry out fire damper testing for businesses, landlords and public buildings in Swanmore and the rest of Hampshire. 683 places in Hampshire are on our list, large and small. There’s also a page for Southampton, about 9 miles away.
Work in SO32 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Church Road, Myers Close and Spring Vale or anywhere close by, we can help. If your site is just outside Swanmore, we cover Hill Grove (1 mile east), Upper Swanmore (1 mile north-east), Mislingford (1 mile south-east), Shirrell Heath (1 mile south) and Kingsmead (2 miles south-east). Further out, we also cover Winchester (10 miles north-west), Gosport (10 miles south), Havant (10 miles south-east), Eastleigh (7 miles west), Fareham (6 miles south) and Horndean (8 miles east).
Landmarks near Swanmore
Typical jobs here are in premises near Swanmore College of Technology and the streets around them. The nearest railway station is Botley station, about 3.7 miles south-west. Other landmarks nearby include Bishop's Waltham Museum (1.7 miles north-west) and Knowle Hospital (4.3 miles south). The countryside around Swanmore includes Beacon Hill and Bishops Waltham Branch LNR.
FAQs for Swanmore
Can the work in Swanmore be done at night or at weekends?
Yes, out-of-hours work is a big part of what we do. Your customers, staff or residents in Swanmore needn’t be disturbed. Tell us your opening hours when you ask for a quote.
Do you do school damper testing in Swanmore in the summer holidays?
Yes, holiday work suits schools best. With about 6 schools and colleges on the FSA’s register within roughly a mile and a half of Swanmore, it pays to plan holiday dates ahead. Tell us your holiday dates and we’ll book the visit for when the site is empty.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before any work starts, and waste is contained as we go. Before we leave, we tidy up and clean down.
How far ahead should we book?
For planned work, earlier is better, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
What happens if you can’t reach some of it?
They’re listed in the report, never skipped quietly. The report says which parts couldn’t be reached and why, and we can quote to improve the access.
Do you certify fire dampers?
Our paperwork is a test report, not a certificate of compliance. For each damper it shows the result and anything that needs putting right.
How long will damper testing take?
Testing takes anything from a couple of hours for a handful of dampers to a full day for a large building. Bigger sites can be phased, so give us a ring on 0345 646 2711 or drop us a line for a quote.
What’s TR19?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Different parts, different methods
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Regular damper testing supports that.
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. Ceiling tiles are lifted for access and replaced afterwards.