Hampshire · Fire damper testing
Fire and smoke damper testing in Rowner
Specialist fire damper testing for Rowner: diagnosis first, then a fixed quote, the work and a report with photos. Call for a fixed quote.
- Fire damper items raised by an assessor
- Dampers that stick or won’t close fully
- Fire dampers nobody can get to
How we handle fire damper testing in Rowner
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and confirming every blade travels fully and comes back. Typical jobs include missing or out-of-date damper records and damper actions from a fire risk assessment, on offices and schools, riser dampers and wall and floor dampers.
A building in a smaller place like Rowner might have only a few dampers, but each one still needs drop testing at least once a year, with a record of every result.
It’s worth checking any contractor’s accreditations. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Location
- Rowner (PO13, PO14)
- Region
- Hampshire
- Records
- Written report with photos
- Price
- A fixed quote up front
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
What we do, step by step
A visit follows the same order every time: protect the area, isolate whatever needs isolating, do the work, tidy up and hand over the paperwork. On site, the work takes anything from a couple of hours for a handful of dampers to a full day for a large building. Tell us about any gates, ladders or locked plant areas at your site near Rowner when you book.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Mention any sign-in, permit or induction we need
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Make sure someone can let us in and lock up afterwards
Get a fixed quote
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, call us on 0345 646 2711 or drop us a line.
Advice
What fire damper testing looks like in Rowner
Sea air reaches Rowner, which sits within about 2 miles of the coast. Near the sea, we look closely for rust on dampers serving intakes and louvres. Food Standards Agency data includes about 19 schools, colleges and universities, about 28 caring premises (care homes, nurseries and hospitals) and about 3 hotels and B&Bs in Rowner and the streets around it, up to about 1.5 miles out. Buildings like these often have ducted ventilation, and wherever a duct crosses a fire-resisting wall or floor there should be a damper, tested at least once a year. The nearest hospital to Rowner is Gosport War Memorial Hospital, about 2.3 miles south-east. A hospital is the kind of building where dampers sit on every floor, and clinics, surgeries and care homes need the same annual testing for any they have.
Healthcare buildings such as Gosport War Memorial Hospital (about 2.3 miles south-east) rely on fire compartments, and the dampers in them need testing at least annually.
Rowner is about 2 miles north-west of Gosport, in Hampshire. For fire damper testing in and around Rowner, please phone us on 0345 646 2711 or email us for a fixed quote. We work across South East England and London, including Rowner. Our area takes in 683 places across Hampshire, large and small.
All of PO13 and PO14 is covered for fire damper testing, from the main roads to the quietest streets. If you need fire damper testing at premises on Wych Lane, Camp Road and Keyes Road or anywhere close by, we can help. Close by, we work in Bridgemary (1 mile south-east), Peel Common (1 mile west), Crofton (1 mile west), Elson (1 mile south-east) and Lee-on-the-Solent (2 miles south-west). We also work in nearby towns such as Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west), Hedge End (9 miles north-west) and Waterlooville (8 miles north-east).
Local landmarks in Rowner
Typical jobs here are in premises near Holbrook Primary School, The Green Dragon pub and Baycroft School and the streets around them. Rowner’s nearest station is Fareham station, about 2.3 miles north of the centre. A little further out are Gosport War Memorial Hospital (2.3 miles south-east) and Portchester Castle (2.9 miles east). Open spaces near Rowner include West of the River Alver and Portsdown Hill.
What your team can do, and what needs us
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
What the work involves, part by part
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. We can test in the evening, overnight or at weekends so the space stays open.
Access panels
A damper can only be tested if it can be reached. That normally means an access panel in the duct, plus a way through the ceiling or wall.
Rowner: your questions answered
Can you work in Rowner outside opening hours?
Yes, out-of-hours work is a big part of what we do. That way a site in Rowner does not have to lose a day’s trading. When you give us a ring on 0345 646 2711, or send details by email, mention when the site is quiet.
Which fire authority looks after Rowner?
That’s Hampshire and Isle of Wight Fire and Rescue Service. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Who is responsible for fire damper testing?
It’s the responsible person, under the Fire Safety Order 2005. Annual testing by a competent person, with written records, is a practical way to show the duty is being met.
What happens to dampers you can’t get to?
Any damper we can’t reach is listed on the report, so you know exactly what’s outstanding. An access panel tends to solve it, and we can quote to fit one.
How often should fire dampers be tested?
The guidance from BESA is at least annually, by a competent person. Dampers should also be tested when they’re first installed.
Will we have to shut during the visit?
Not normally. The area we are working in has to be out of use while we’re there, so the visit goes in a quiet slot.
Do you look at the system first?
Yes. We always survey first, either from pictures and details you send or on a site visit. A fixed quote follows.
Towns and villages near Rowner
Also in Rowner
Multi-site and managed buildings
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party, and the report can go to both.
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
Fixed quotes for fire damper testing in Rowner
The diagnosis comes before the price. We look at:
- Whether it’s a one-off visit or part of a schedule
- The size of the system
- Whether we need access equipment or extra panels
- The times the site is available
Working hours, access and the scale of the site can all change the price. We take each of them into account and give you a fixed price before any work starts.
What we need to know
A few details help us quote accurately. With your enquiry, please include:
- The site address and the type of premises
- Any symptoms, from odd noises to smells or leaks
- Photos showing the whole system and its surroundings
- How we’d reach plant on a roof or in a plant room
If you need fire damper testing in Rowner, call 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, and send pictures or your last report if you can. A fixed quote normally follows within one working day.
When to call us in Rowner
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either can stop the blade dropping fully.
Clients normally contact us after spotting one of these:
- Gaps in the fire damper test log
- Dampers clogged with dust or grease
- Dampers hidden with no access panel or hatch
- Smoke dampers that need testing through their controls
Site managers at schools such as Bridgemary School typically find the summer break the easiest time for ceiling work like damper testing.
Questions to ask before booking
- Whether the price is fixed
- What insurance they carry
- What happens if part of the system can’t be accessed
- When they can work, and whether that is outside your opening hours
Looking after it afterwards
Results last longer with the right care. We suggest:
- Act on failed dampers rather than leaving them on file
- Store test records alongside the fire risk assessment
- Warn anyone working in ceiling voids about the dampers
- Make sure access panels stay clear and usable
The next test should be no more than a year away. The guidance is at least once a year, and booking the same month each year keeps it simple.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.