Hampshire · Extract fan repair and replacement
Rowner extract fan repair
Extract fan repair for Rowner, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- A motor that trips out or overheats
- A fan rattling in its housing
- An extract that vibrates through the ductwork
Extract fan repair for kitchens and businesses in Rowner
A faulty fan does not always mean a new one. Sometimes cleaning the impeller or renewing worn parts is enough, and that’s what we’ll recommend. When a fan is worn beyond sensible repair, we fit a replacement matched to the duct and the kitchen. If you are dealing with an old fan that needs replacing and poor airflow at the canopy, we can put it right.
In a place like Rowner, extract fans are often older units on a wall or roof. An older fan that fails may be better replaced than repaired.
We’ve been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Rowner (PO13, PO14)
- Wider area
- Hampshire
- Records
- Written report with photos
- Quotes
- A fixed price before any work starts
- Hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
What happens if it’s left?
Wherever the kitchen is, Rowner included, the fan often sits on an outside wall or roof, so its noise doesn’t stay in the kitchen. Dealing with the fault brings the noise back down before it becomes a nuisance. Systems on quieter sites still build up dirt and wear, just more slowly.
The price reflects the work, not guesswork. That’s why we survey first, from photos or on site, and why the quote is fixed before we start.
What you get with us
- Out-of-hours work and a 24/7 emergency line
- A fixed price before any work starts
- Trading since 2009
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at what affects the cost or our accreditations.
Looking after it afterwards
To keep the system working properly between visits:
- Don’t wait for a noisy fan to stop
- Don’t turn the fan down to hide a noise
- Keep the fan on a planned cleaning cycle
- Never run the extract with filters missing
Where parts need ordering, we explain what that means for the kitchen until we return. We then come back and fit them outside your busiest hours.
A 3, 6 or 12-monthly cleaning plan brings us back at set intervals, so the fan is looked at as part of each visit and problems are spotted sooner.
FAQs for Rowner
Which council inspects kitchens in Rowner?
In Rowner, it’s Gosport council that carries out food hygiene inspections. An officer may ask how the kitchen is ventilated, so keep repair records with your maintenance file.
Does the sea air around Rowner make a difference to extract fan repair?
It can. Rowner is within about 2 miles of the coast, and salt air speeds up corrosion. We look at fans, cowls and fixings for rust as well as grease.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We are fully insured and have been trading since 2009.
What should go in our maintenance log?
Everything that shows the system is looked after: our reports and pictures, any certificates and your in-house logs. A single log for each site works best.
What is TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked, and it takes a risk-based approach.
Is there a survey before the work?
Yes. Every job is surveyed first, either from photos and details you send or on a site visit. Then you get a fixed quote.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, plus food production and leisure sites.
How long will the fan be out of action?
It depends on the fault, but as a guide it takes part of a day for most faults, with a return visit if parts have to be ordered. We will give you a better idea once we’ve diagnosed it.
What the work involves, part by part
Fan controls
Controls are checked as well as the fan itself since the motor is not always to blame.
Motors and bearings
Motors and bearings take the most strain in a kitchen extract fan. Heat, grease and long running hours all wear them.
When to call us in Rowner
In Rowner, as anywhere, long cooking days mean long hours for the fan. Belts on a belt-driven fan stretch and wear, so the fan squeals or turns more slowly.
Signs it’s time to call us include:
- A failed fan that needs a replacement
- An overheating extract motor
- A fan shaking on its mountings
- A worn or slipping fan belt
If you look after a church or hall kitchen near St Matthew's, or anywhere in Rowner, test the extract fan before a big event rather than on the day.
Comparing quotes
- Whether the figure could change on the day
- If they look at the system before pricing
- Whether the quote shows VAT
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
The process
Everything the job needs comes with us, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. On site, the work takes a few hours on site, depending on the fault and the access to the fan. Because the survey comes first, a visit to Rowner can usually be finished without a second trip.
- A visit is booked, in the evening or overnight if that suits.
- The extract is switched off and the fan opened up.
- Bearings, drive, impeller, motor and mounts are inspected.
- We explain the options and quote a fixed price.
- The fan is repaired or replaced, then checked running.
Before we arrive
- Clear loose items from the work area
- Make sure equipment near the work can be switched off and left to cool
- Let us know how we reach the system, including roofs, risers and plant rooms
Ask for a quote
Photos are enough for some jobs, while others need a look on site. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before any work starts.
Read more
Extract fan repair in Rowner: local notes
Rowner is within about 2 miles of the coast. A fan exposed to sea air needs its fixings and housing checked more often than one inland. There are about 36 cafés, restaurants and staff canteens and about 25 takeaways and sandwich shops in Rowner and the streets around it, up to about 1.5 miles out, according to the Food Standards Agency’s register. A kitchen with a dead extract fan gets hot and smoky fast, and kitchens like these feel it at once. It’s Gosport council that sends environmental health officers to food businesses in Rowner. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. A kitchen without a working fan has a problem to fix quickly.
If you run a school kitchen, at a school such as Bridgemary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term.
Rowner is about 2 miles north-west of Gosport, in Hampshire. We carry out extract fan repair for commercial premises of every kind in Rowner and the rest of Hampshire. Across Hampshire, we cover 683 places, and Rowner is one of them.
Here we cover the PO13 and PO14 postcode area for extract fan repair. That includes premises on Wych Lane, Camp Road and Keyes Road and the roads around them. Other places close to Rowner include Bridgemary (1 mile south-east), Peel Common (1 mile west), Crofton (1 mile west), Elson (1 mile south-east) and Lee-on-the-Solent (2 miles south-west). Within a short drive, we also cover Havant (9 miles east), Eastleigh (12 miles north-west), Horndean (9 miles north-east), Chandler's Ford (15 miles north-west), Hedge End (9 miles north-west) and Waterlooville (8 miles north-east).
Near you in Rowner
In Rowner, that means kitchens and buildings near Holbrook Primary School, The Green Dragon pub and Baycroft School, among other places. The nearest railway station is Fareham station, roughly 2.3 miles north of the centre. A little further out are Gosport War Memorial Hospital (2.3 miles south-east) and Portchester Castle (2.9 miles east). For a walk, there’s West of the River Alver and Portsdown Hill.
Fixed quotes for extract fan repair in Rowner
Your quote is based on your site. We consider:
- A single visit or a regular plan
- The number of sites or systems
- The scale of the work
- Whether we need access equipment or extra panels
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we’ll go through it with you.
Asking for a quote
You don’t need the technical terms. Just send:
- How we’d reach plant on a roof or in a plant room
- The times we could work without disrupting the site
- The site address and the type of premises
- A few general shots of the system
Want a quote for extract fan repair? Please call 0345 646 2711, or email photos and tell us about the site. We’ll talk you through the work and give you a fixed quote before you commit to anything.
What a clean won’t put right
Not every problem is solved by extract fan repair, and we’ll tell you before any work starts. It doesn’t solve:
- A greasy canopy and duct that a fan repair won’t touch
- An extract system that was undersized from the start
- Gas interlock faults that a Gas Safe registered engineer must deal with
Not sure which it is? You can give us a ring on 0345 646 2711 or use the quote form and we will tell you honestly.
What the work covers
- Bearings
- Belts and pulleys
- Roof and wall fans
- Fan motors
- Fan housings
- Kitchen extract fans